Upgrading Pyrolytic Residue from End-of-Life Tires to Efficient Heterogeneous Catalysts for the Conversion of Glycerol to Acetins.

Recovered carbon blacks (rCBs) produced from end-of-life tires using pyrolysis were transformed into solid acid catalysts for the synthesis of acetins, i.e., products with a wide spectrum of practical applications. Tuning the chemical properties of the surface of samples and introducing specific functional groups on the rCBs were achieved through carbon functionalization with concentrated H 2 SO 4 . The initial and modified rCBs were thoroughly characterized using techniques such as elemental analysis, potentiometric back titration, thermogravimetric technique, scanning and transmission microscopy, X-ray photoelectron spectroscopy, etc. The catalytic activities of the samples were measured via batch mode glycerol acetylation performed at 110 °C and compared to the catalytic performance of the functionalized commercial carbon black. The modified rCBs were found to show a significant catalytic effect in the tested reaction, giving high glycerol conversions (above 95%) and satisfactory combined yields of diacetins and triacetin (~72%) within 4 h; this behavior was attributed to the presence of -SO 3 H moieties on the surface of functionalized rCBs. The reusability tests indicated that the modified samples were catalytically stable in subsequent acetylation runs. The obtained results evidenced the feasibility of using end-of-life tires for the production of effective acid catalysts for glycerol valorization processes.