Single-lens dynamic [Formula: see text]-scanning for simultaneous in situ position detection and laser processing focus control.

Existing auto-focusing methods in laser processing typically include two independent modules, one for surface detection and another for [Formula: see text]-axis adjustment. The latter is mostly implemented by mechanical [Formula: see text] stage motion, which is up to three orders of magnitude slower than the lateral processing speed. To alleviate this processing bottleneck, we developed a single-lens approach, using only one high-speed [Formula: see text]-scanning optical element, to accomplish both in situ surface detection and focus control quasi-simultaneously in a dual-beam setup. The probing beam scans the surface along the [Formula: see text]-axis continuously, and its reflection is detected by a set of confocal optics. Based on the temporal response of the detected signal, we have developed and experimentally demonstrated a dynamic surface detection method at 140-350 kHz, with a controlled detection range, high repeatability, and minimum linearity error of 1.10%. Sequentially, by synchronizing at a corresponding oscillation phase of the [Formula: see text]-scanning lens, the fabrication beam is directed to the probed [Formula: see text] position for precise focus alignment. Overall, our approach provides instantaneous surface tracking by collecting position information and executing focal control both at 140-350 kHz, which significantly accelerates the axial alignment process and offers great potential for enhancing the speed of advanced manufacturing processes in three-dimensional space.