Login / Signup

Catalytic Activity of Oxidized Carbon Waste Ashes for the Crosslinking of Epoxy Resins.

Enrica StasiAntonella GiuriMaurizio La VillettaDomenico CirilloGaetano GuerraAlfonso MaffezzoliEleonora FerrarisCarola Esposito Corcione
Published in: Polymers (2019)
In this study, two different fillers were prepared from carbon-based ashes, produced from the wooden biomass of a pyro-gasification plant, and starting from lignocellulosic waste. The first type was obtained by dry ball-milling (DBA), while the second one was prepared by oxidation in H2O2 of the dry ball-milled ashes (oDBA). The characterization of the fillers included wide-angle x-ray diffraction (WAXD), thermogravimetric, and Fourier-transform infrared spectroscopy (FTIR) analysis. The DBA and oDBA fillers were then tested as possible catalysts for the crosslinking reaction of a diglycidyl ether of bisphenol A (DGEBA) with a diamine. The cure reaction was studied by means of rheometry and differential scanning calorimetry (DSC). The oDBA filler exhibits both a higher catalytic activity on the epoxide-amine reaction than the DBA sample and improved mechanical properties and glass transition temperature. The results obtained indicate, hence, the potential improvement brought by the addition of carbon-based waste ashes, which allow both increasing the flexural properties and the glass transition temperature of the epoxy resin and reducing the curing time, acting as a catalyst for the crosslinking reaction of the epoxy resin.
Keyphrases