Login / Signup

Influence of the Peek Abutments on Mechanical Behavior of the Internal Connections Single Implant.

Jefferson David Melo de MatosGuilherme da Rocha Scalzer LopesDaher Antonio QueirozAndré Luis de Jesus PereiraMário Alexandre Coelho SinhoretiNathália de Carvalho RamosVinicius LinoFlavio Rosa de OliveiraAlexandre Luiz Souto BorgesMarco Antonio Bottino
Published in: Materials (Basel, Switzerland) (2022)
The present study aimed to evaluate the biomechanical behavior of PEEK abutments with different heights on single titanium implants. To investigate the implant surface, different tests (scanning electron microscopy, energy-dispersive X-ray, and X-ray diffraction) were adopted. Herein, 20 implants received the 4.5 × 4.0 mm PEEK short abutment (SA) and 20 received the 4.5 × 5.5 mm PEEK long abutment (LA). The abutments were installed using dual-cure resin cement. To determine the fatigue test, two specimens from each group were submitted to the single load fracture test. For this, the samples were submitted to a compressive load of (0.5 mm/min; 30°) in a universal testing machine. For the fatigue test, the samples received 2,000,000 cycles (2 Hz; 30°). The number of cycles and the load test was analyzed by the reliability software SPSS statistics using Kaplan-Meier and Mantel-Cox tests (log-rank) ( p < 0.05). The maximum load showed no statistically significant differences ( p = 0.189) for the SA group (64.1 kgf) and the LA group (56.5 kgf). The study groups were statistically different regarding the number of cycles ( p = 0.022) and fracture strength ( p = 0.001). PEEK abutments can be indicated with caution for implant-supported rehabilitation and may be suitable as temporary rehabilitation.
Keyphrases
  • electron microscopy
  • soft tissue
  • high resolution
  • sleep quality
  • deep learning
  • magnetic resonance imaging
  • machine learning
  • magnetic resonance
  • liquid chromatography
  • gas chromatography