Review of Heat Transfer Analysis in Different Cavity Geometries with and without Nanofluids.

Many strategies have been attempted for accomplishing the needed changes in the heat-transfer rate in closed cavities in recent years. Some strategies used include the addition of flexible or hard partitions to the cavities (to split them into various pieces), thickening the borders, providing fins to the cavities, or altering the forms or cavity angles. Each of these methods may be used to increase or decrease heat transmission. Many computational and experimental investigations of heat transport in various cavity shapes have been conducted. The majority of studies focused on improving the thermal efficiency of heat transmission in various cavity containers. This paper introduced a review of experimental, numerical, and analytical studies related to heat transfer analyses in different geometries, such as circular, cylindrical, hexagonal, and rectangular cavities. Results of the evaluated studies indicate that the fin design increased heat transmission and sped up the melting time of the PCM; the optimal wind incidence angle for the maximum loss of combined convective heat depends on the tilt angle of the cavity and wind speed. The Nusselt number graphs behave differently when decreasing the Richardson number. Comparatively, the natural heat transfer process dominates at Ri = 10, but lid motion is absent at Ri = 1. For a given Ri and Pr, the cavity without a block performed better than the cavity with a square or circular block. The heat transfer coefficient at the heating sources has been established as a performance indicator. Hot source fins improve heat transmission and reduce gallium melting time.