Suppressing Element Inhomogeneity Enables 14.9% Efficiency CZTSSe Solar Cells.

Kesterites Cu 2 ZnSn(S x Se 1-x ) 4 (CZTSSe) solar cells suffer from severe open-circuit voltage (V OC ) loss due to the numerous secondary phases and defects. The prevailing notion attributes this issue to Sn-loss during the selenization. However, this work unveils that, instead of Sn-loss, elemental inhomogeneity caused by Cu-directional diffusion towards Mo(S,Se) 2 layer, is the critical factor in the formation of secondary phases and defects. This diffusion decreases the Cu/(Zn+Sn) ratio to 53% at the bottom fine-grain layer, increasing the Sn-/Zn-related bulk defects. By suppressing the Cu-directional diffusion with a blocking layer, we effectively improve the crystal quality and reduce the defect density, leading to a remarkable efficiency of 14.9% with a V OC of 576 mV and a certified efficiency of 14.6%. The findings provide insights into element inhomogeneity, holding significant potential to advance the development of CZTSSe solar cells. This article is protected by copyright. All rights reserved.