Effect of bio-polyol molecular weight on the structure and properties of polyurethane-polyisocyanurate (PUR-PIR) foams.

The increasing interest in polyurethane materials has raised the question of the environmental impact of these materials. For this reason, the scientists aim to find an extremely difficult balance between new material technologies and sustainable development. This work attempts to validate the possibility of replacing petrochemical polyols with previously synthesized bio-polyols and their impact on the structure and properties of rigid polyurethane-polyisocyanurate (PUR-PIR). To date, biobased polyols were frequently used in the manufacturing of PU, but application of bio-polyols synthesized via solvothermal liquefaction using different chains of polyethylene glycol has not been comprehensively discussed. In this work, ten sets of rigid polyurethane foams were synthesized. The influence of bio-polyols addition on foam properties was investigated by mechanical testing, thermogravimetric analysis (TGA), and cone calorimetry. The structure was determined by scanning electron microscopy (SEM) and a gas pycnometer. The tests revealed a significant extension of foam growth time, which can be explained by possible steric hindrances and the presence of less reactive secondary hydroxyl groups. Moreover, an increase average size of pores and aspect ratio was noticed. This can be interpreted by the modification of the cell growth process by the introduction of a less reactive bio-polyol with different viscosity. The analysis of foams mechanical properties showed that the normalized compressive strength increased up to 40% due to incorporation of more cross-linked structures. The thermogravimetric analysis demonstrated that the addition of bio-based polyols increased temperature of 2% (T 2% ) and 5% (T 5% ) mass degradation. On the other hand, evaluation of flammability of manufactured foams showed increase of total heat release (HRR) and smoke release (TSR) what may be caused by reduction of char layer stability. These findings add substantially to our understanding of the incorporation of bio-polyols into industrial polyurethane systems and suggest the necessity of conducting further research on these materials.