Improving Photovoltaic Performance of Hybrid Organic-Inorganic MAGeI 3 Perovskite Solar Cells via Numerical Optimization of Carrier Transport Materials (HTLs/ETLs).

In this study, a hybrid organic-inorganic perovskite solar cell (PSC) based on methylammonium germanium triiodide (MAGeI 3 ), which is composed of methylammonium (CH3NH3+) cations and germanium triiodide (GeI3-) anions, has been numerically studied using SCAPS-1d codes. An extensive investigation of various electron transport layers (ETLs) and hole transport layers (HTLs) was conducted to identify the most optimal device configuration. The FTO/ZnOS/MAGeI 3 /PEDOT-WO 3 structure performed the highest efficiency of all combinations tested, with an impressive optimized efficiency of 15.84%. This configuration exhibited a V oc of 1.38 V, J sc of 13.79 mA/cm 2 , and FF of 82.58%. J-V characteristics and external quantum efficiency (EQE) measurements indicate that this device offers superior performance, as it has reduced current leakage, improved electron and hole extraction characteristics, and reduced trap-assisted interfacial recombination. Optimum device performance was achieved at active layer thickness of 560 nm. These findings may also serve as a basis for developing lightweight and ultra-thin solar cells, in addition to improving overall efficiency. Furthermore, a comprehensive correlation study was conducted to evaluate the optimum thickness and doping level for both ZnOS-ETL and PEDOT-WO 3 -HTL. The photovoltaic performance parameters of the FTO/ZnOS/MAGeI 3 /PEDOT-WO 3 structure were analyzed over a wide temperature range (275 K to 450 K). The structure exhibited stable performance at elevated operating temperatures up to 385 K, with only minimal degradation in PCE of approximately 0.42%. Our study underscores the promise of utilizing cost-effective and long-term stability materials like ZnOS and PEDOT-WO 3 alongside the toxic-free MAGeI 3 perovskite. This combination exhibits significant potential for eco-friendly PSC, paving the way for the development of highly efficient ultra-thin PSC.