Polydopamine Codoped BaTiO 3 -Functionalized Polyvinylidene Fluoride Coating as a Piezo-Biomaterial Platform for an Enhanced Cellular Response and Bioactivity.

For a number of clinical applications, Ti6Al4V implants with bioactive coatings are used. However, the deposition of a functional polymeric coating with desired physical properties, biocompatibility, and long-term stability remains largely unexplored. Among widely investigated synthetic biomaterials, polyvinylidene fluoride (PVDF) with β-polymorph and barium titanate (BaTiO 3 , BT) are considered as good examples of piezo-biopolymers and bioceramics, respectively. In this work, an adherent PVDF-based nanocomposite coating is deposited onto a Ti6Al4V substrate to explore the impact of its functional characteristics (piezoactivity) on cellular behavior and bioactivity (apatite growth and mineralized matrix formation). The precursor solution was prepared by physically grafting PVDF with polydopamine (pDOPA), forming mPVDF. Subsequently, mPVDF was reinforced with BaTiO 3 nanoparticles in dimethylformamide/acetone solution, and the resulting nanocomposite (mPVDF-BT) was then spray-coated onto a roughened Ti6Al4V substrate using an airbrush at 140 °C under a pressure of 2 bar. The reproducibility of this simple yet effective processing approach to deposit chemically stable and adherent coatings was established. Remarkably, the modification with pDOPA and reinforcement with BaTiO 3 nanoparticles resulted in an enhanced β-fraction of PVDF up to 96%. This nanocomposite encouraged cellular viability of preosteoblasts (∼158% at day 5) and characteristic spreading, in vitro . Our findings indicate that the mPVDF-BT coating facilitated faster nucleation and growth of the biomineralized apatite layer with ∼70% coverage within 3 days of incubation in the simulated body fluid. In addition, the coupling among surface polar energy (5.5 mN/m), fractional polarity (∼117%), roughness (8.7 μm), and fibrous morphology also endorsed better cellular behavior. Taken together, this coating deposition strategy will pave the pathway toward designing cell-instructive surface-modified Ti6Al4V biomaterials with tailored biomineralization and bioactivity properties for musculoskeletal reconstruction and regeneration applications.