Molecularly imprinted polymer nanoparticle-carbon nanotube composite electrochemical gas sensor for highly selective and sensitive detection of methanol vapour.

An electrochemical gas sensor has been fabricated using molecularly imprinted polymer nanoparticles (nanoMIPs) and multiwalled carbon nanotubes on screen-printed electrodes. Methanol vapour was chosen as the target due to its toxicity as its suitability as a model for more harmful pollutant gases. The sensor functions under ambient conditions and in the required concentration range, in contrast to all previous MIP-based gas sensors for methanol. The sensitivity of the sensor was greatly improved by the addition of multiwall carbon nanotubes, resulting in a limit of detection of approximately 10 ppm. The nanoMIPs provide an inherent selectivity for the target inherent in its design. Selectivity studies were performed with structurally analogous alcohols at various concentrations, demonstrating selectivity for methanol 12.1 times that for ethanol at 2 mmol dm -3 and 4.2 times that for ethanol at 1 mmol dm -3 . Interactions with isopropanol and n -propanol were found to be non-specific, and the response to water was negligible. This demonstrates an improvement over previous methanol gas sensors based on molecularly imprinted polymers. No response was observed with carbon nanotubes alone, and no selectivity was observed with non-imprinted equivalents of the nanoMIP sensor. The resulting device is by far the most practical MIP-based instrument for methanol gas sensing thus far described in the literature, being the only example capable of functioning at the necessary methanol vapour concentrations and at the required temperature and humidity. With the selectivity and sensitivity described and the simple design, the developed device provides a substantial advance in the field of molecularly imprinted gas sensors.