Patterning (Electro)chemical Treatment-Free Electrodes with a 3D Printing Pen.

A simple fabrication method to make electrochemical sensors is reported. The electrodes were fabricated with a commercial filament based on polylactic acid and carbon black (PLA/CB). They were engineered with a three-dimensional (3D) printing pen and poly(methyl methacrylate) template. The optimization parameters included the thickness and diameters of the electrodes. The electrode diameter was restricted by the 3D printing pen's nozzle dimension, and larger diameters generated small cracks on the electrode surface, compromising their analytical signal. The electrode thickness can increase the electrical resistance, affecting their electrochemical response. The fabrication showed reproducibility (RSD = 4%). The electrode surface was easily renewed by sanding the electrodes, making them reusable. Additionally, the proposed sensor provided comparable electrochemical responses over traditional glassy carbon electrodes. Moreover, no (electro)chemical surface treatment was required for sensing applications due to the compromise between the thickness and diameters of the electrodes, effectively translating the filaments' electrical properties to resulting materials. The electrodes' analytical performance was shown for organic and inorganic species, including paraquat, Pb 2+ , and caffeic acid. As proof of concept, the analytical applicability was demonstrated for total polyphenolic quantification in tea samples. Therefore, this work provides an alternative to fabricating miniaturized electrodes, bringing valuable insights into PLA/CB 3D-printed sensors and opening possibilities for designing electrode arrays. Moreover, the proposed electrodes are promising platforms for paper-based microfluidic systems.