Login / Signup

Dislocation Filter Based on LT-GaAs Layers for Monolithic GaAs/Si Integration.

Mikhail O PetrushkovDemid S AbramkinEugeny A EmelyanovMikhail A PutyatoOleg S KomkovDmitrii D FirsovAndrey V VasevMikhail Yu YesinAskhat K BakarovIvan D LoshkarevAnton K GutakovskiiVictor V AtuchinValery V Preobrazhenskii
Published in: Nanomaterials (Basel, Switzerland) (2022)
The use of low-temperature (LT) GaAs layers as dislocation filters in GaAs/Si heterostructures (HSs) was investigated in this study. The effects of intermediate LT-GaAs layers and of the post-growth and cyclic in situ annealing on the structural properties of GaAs/LT-GaAs/GaAs/Si(001) HSs were studied. It was found that the introduction of LT-GaAs layers, in combination with post-growth cyclic annealing, reduced the threading dislocation density down to 5 × 10 6 cm -2 , the root-mean-square roughness of the GaAs surface down to 1.1 nm, and the concentration of non-radiative recombination centers in the near-surface GaAs/Si regions down to the homoepitaxial GaAs level. Possible reasons for the improvement in the quality of near-surface GaAs layers are discussed. On the one hand, the presence of elastic deformations in the GaAs/LT-GaAs system led to dislocation line bending. On the other hand, gallium vacancies, formed in the LT-GaAs layers, diffused into the overlying GaAs layers and led to an increase in the dislocation glide rate. It was demonstrated that the GaAs/Si HSs obtained with these techniques are suitable for growing high-quality light-emitting HSs with self-assembled quantum dots.
Keyphrases
  • quantum dots
  • room temperature
  • photodynamic therapy
  • light emitting
  • sensitive detection
  • tandem mass spectrometry