Luis Quiles-Carrillo

Publication Activity (10 Years)

Years Active: 2018-2023
Publications (10 Years): 33

Top Topics

Reduced Graphene Oxide

Risk Assessment

Tissue Engineering

Top Venues

Materials (Basel, Switzerland)

Molecules (Basel, Switzerland)

Antioxidants (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

María Jordà-Reolid, Virginia Moreno, Asunción Martínez García, José António Covas, Jaume Gomez-Caturla, Juan Ivorra-Martinez, Luis Quiles-Carrillo
Incorporation of Argan Shell Flour in a Biobased Polypropylene Matrix for the Development of High Environmentally Friendly Composites by Injection Molding. Polymers 15 (12) (2023)
María Jordà-Reolid, Virginia Moreno, Asunción Martínez García, José António Covas, Jaume Gomez-Caturla, Juan Ivorra-Martinez, Luis Quiles-Carrillo
Incorporation of Argan Shell Flour in a Biobased Polypropylene Matrix for the Development of High Environmentally Friendly Composites by Injection Molding. Polymers 15 (12) (2023)
Celia Dolza, Eloi Gonga, Eduardo Fages, Ramon Tejada-Oliveros, Rafael Balart-Gimeno, Luis Quiles-Carrillo
Green Composites from Partially Bio-Based Poly(butylene succinate- co -adipate)-PBSA and Short Hemp Fibers with Itaconic Acid-Derived Compatibilizers and Plasticizers. Polymers 14 (10) (2022)
Ramon Tejada-Oliveros, Stefano Fiori, Jaume Gomez-Caturla, Diego Lascano, Nestor Montanes, Luis Quiles-Carrillo, David Garcia-Sanoguera
Development and Characterization of Polylactide Blends with Improved Toughness by Reactive Extrusion with Lactic Acid Oligomers. Polymers 14 (9) (2022)
David Marset, Eduardo Fages, Eloi Gonga, Juan Ivorra-Martinez, Lourdes Sánchez-Nacher, Luis Quiles-Carrillo
Development and Characterization of High Environmentally Friendly Composites of Bio-Based Polyamide 1010 with Enhanced Fire Retardancy Properties by Expandable Graphite. Polymers 14 (9) (2022)
Rafael Balart-Gimeno, Daniel Garcia-Garcia, Vicent Fombuena, Luis Quiles-Carrillo, Marina Patricia Arrieta
Biopolymers from Natural Resources. Polymers 13 (15) (2021)
Ramon Tejada-Oliveros, Rafael Balart-Gimeno, Juan Ivorra-Martinez, Jaume Gomez-Caturla, Nestor Montanes, Luis Quiles-Carrillo
Improvement of Impact Strength of Polylactide Blends with a Thermoplastic Elastomer Compatibilized with Biobased Maleinized Linseed Oil for Applications in Rigid Packaging. Molecules (Basel, Switzerland) 26 (1) (2021)
Francisco Burgada, Eduardo Fages, Luis Quiles-Carrillo, Diego Lascano, Juan Ivorra-Martinez, Marina Patricia Arrieta, Octavio Fenollar
Upgrading Recycled Polypropylene from Textile Wastes in Wood Plastic Composites with Short Hemp Fiber. Polymers 13 (8) (2021)
Maria Jorda-Reolid, Jaume Gomez-Caturla, Juan Ivorra-Martinez, Pablo Marcelo Stefani, Sandra Rojas-Lema, Luis Quiles-Carrillo
Upgrading Argan Shell Wastes in Wood Plastic Composites with Biobased Polyethylene Matrix and Different Compatibilizers. Polymers 13 (6) (2021)
Diego Lascano, Rene Guillen-Pineda, Luis Quiles-Carrillo, Juan Ivorra-Martinez, Rafael Balart-Gimeno, Nestor Montanes, Teodomiro Boronat
Manufacturing and Characterization of Highly Environmentally Friendly Sandwich Composites from Polylactide Cores and Flax-Polylactide Faces. Polymers 13 (3) (2021)
Celia Dolçà, Eduardo Fages, Eloi Gonga, David Garcia-Sanoguera, Rafael Balart-Gimeno, Luis Quiles-Carrillo
The Effect of Varying the Amount of Short Hemp Fibers on Mechanical and Thermal Properties of Wood-Plastic Composites from Biobased Polyethylene Processed by Injection Molding. Polymers 14 (1) (2021)
Diego Lascano, Alejandro Lerma-Canto, Vicent Fombuena, Rafael Balart-Gimeno, Nestor Montanes, Luis Quiles-Carrillo
Kinetic Analysis of the Curing Process of Biobased Epoxy Resin from Epoxidized Linseed Oil by Dynamic Differential Scanning Calorimetry. Polymers 13 (8) (2021)
Celia Dolza, Eduardo Fages, Eloi Gonga, Jaume Gomez-Caturla, Rafael Balart-Gimeno, Luis Quiles-Carrillo
Development and Characterization of Environmentally Friendly Wood Plastic Composites from Biobased Polyethylene and Short Natural Fibers Processed by Injection Moulding. Polymers 13 (11) (2021)
David Marset, Celia Dolza, Eduardo Fages, Eloi Gonga, Oscar Gutiérrez, Jaume Gomez-Caturla, Juan Ivorra-Martinez, Lourdes Sanchez-Nacher, Luis Quiles-Carrillo
The Effect of Halloysite Nanotubes on the Fire Retardancy Properties of Partially Biobased Polyamide 610. Polymers 12 (12) (2020)
Juan Ivorra-Martinez, Isabel Verdu, Octavio Fenollar, Lourdes Sanchez-Nacher, Rafael Balart-Gimeno, Luis Quiles-Carrillo
Manufacturing and Properties of Binary Blend from Bacterial Polyester Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and Poly(caprolactone) with Improved Toughness. Polymers 12 (5) (2020)
Sandra Rojas-Lema, Luis Quiles-Carrillo, Daniel Garcia-Garcia, Beatriz Melendez-Rodriguez, Rafael Balart-Gimeno, Sergio Torres-Giner
Tailoring the Properties of Thermo-Compressed Polylactide Films for Food Packaging Applications by Individual and Combined Additions of Lactic Acid Oligomer and Halloysite Nanotubes. Molecules (Basel, Switzerland) 25 (8) (2020)
Sergi Montava-Jorda, Diego Lascano, Luis Quiles-Carrillo, Nestor Montanes, Teodomiro Boronat, Antonio Vicente Martinez-Sanz, Santiago Ferrándiz-Bou, Sergio Torres-Giner
Mechanical Recycling of Partially Bio-Based and Recycled Polyethylene Terephthalate Blends by Reactive Extrusion with Poly(styrene-co-glycidyl methacrylate). Polymers 12 (1) (2020)
Sandra Rojas-Lema, Sergio Torres-Giner, Luis Quiles-Carrillo, Jaume Gomez-Caturla, Daniel Garcia-Garcia, Rafael Balart-Gimeno
On the Use of Phenolic Compounds Present in Citrus Fruits and Grapes as Natural Antioxidants for Thermo-Compressed Bio-Based High-Density Polyethylene Films. Antioxidants (Basel, Switzerland) 10 (1) (2020)
David Marset, Celia Dolza, Teodomiro Boronat, Nestor Montanes, Rafael Balart-Gimeno, Lourdes Sanchez-Nacher, Luis Quiles-Carrillo
Injection-Molded Parts of Partially Biobased Polyamide 610 and Biobased Halloysite Nanotubes. Polymers 12 (7) (2020)
Juan Ivorra-Martinez, Luis Quiles-Carrillo, Teodomiro Boronat, Sergio Torres-Giner, José A Covas
Assessment of the Mechanical and Thermal Properties of Injection-Molded Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/Hydroxyapatite Nanoparticles Parts for Use in Bone Tissue Engineering. Polymers 12 (6) (2020)
Juan Ivorra-Martinez, Jose Manuel-Mañogil, Teodomiro Boronat, Lourdes Sanchez-Nacher, Rafael Balart-Gimeno, Luis Quiles-Carrillo
Development and Characterization of Sustainable Composites from Bacterial Polyester Poly(3-Hydroxybutyrate-co-3-hydroxyhexanoate) and Almond Shell Flour by Reactive Extrusion with Oligomers of Lactic Acid. Polymers 12 (5) (2020)
Sandra Rojas-Lema, Jorge Terol, Eduardo Fages, Rafael Balart-Gimeno, Luis Quiles-Carrillo, Cristina Prieto, Sergio Torres-Giner
Microencapsulation of Copper(II) Sulfate in Ionically Cross-Linked Chitosan by Spray Drying for the Development of Irreversible Moisture Indicators in Paper Packaging. Polymers 12 (9) (2020)
Diego Lascano, Giovanni Moraga, Juan Ivorra-Martinez, Sandra Rojas-Lema, Sergio Torres-Giner, Rafael Balart-Gimeno, Teodomiro Boronat, Luis Quiles-Carrillo
Development of Injection-Molded Polylactide Pieces with High Toughness by the Addition of Lactic Acid Oligomer and Characterization of Their Shape Memory Behavior. Polymers 11 (12) (2019)
Luis Quiles-Carrillo, Sergi Montava-Jordà, Teodomiro Boronat, Christopher Sammon, Rafael Balart-Gimeno, Sergio Torres-Giner
On the Use of Gallic Acid as a Potential Natural Antioxidant and Ultraviolet Light Stabilizer in Cast-Extruded Bio-Based High-Density Polyethylene Films. Polymers 12 (1) (2019)
Sergi Montava-Jordà, Sergio Torres-Giner, Santiago Ferrándiz-Bou, Luis Quiles-Carrillo, Nestor Montanes
Development of Sustainable and Cost-Competitive Injection-Molded Pieces of Partially Bio-Based Polyethylene Terephthalate through the Valorization of Cotton Textile Waste. International journal of molecular sciences 20 (6) (2019)
Rafael Balart-Gimeno, David Garcia-Sanoguera, Luis Quiles-Carrillo, Nestor Montanes, Sergio Torres-Giner
Kinetic Analysis of the Thermal Degradation of Recycled Acrylonitrile-Butadiene-Styrene by non-Isothermal Thermogravimetry. Polymers 11 (2) (2019)
Lucia Gonzalez, Angel Agüero, Luis Quiles-Carrillo, Diego Lascano, Nestor Montanes
Optimization of the Loading of an Environmentally Friendly Compatibilizer Derived from Linseed Oil in Poly(Lactic Acid)/Diatomaceous Earth Composites. Materials (Basel, Switzerland) 12 (10) (2019)
Diego Lascano, Luis Quiles-Carrillo, Sergio Torres-Giner, Teodomiro Boronat, Nestor Montanes
Optimization of the Curing and Post-Curing Conditions for the Manufacturing of Partially Bio-Based Epoxy Resins with Improved Toughness. Polymers 11 (8) (2019)
Diego Lascano, Luis Quiles-Carrillo, Rafael Balart-Gimeno, Teodomiro Boronat, Nestor Montanes
Kinetic Analysis of the Curing of a Partially Biobased Epoxy Resin Using Dynamic Differential Scanning Calorimetry. Polymers 11 (3) (2019)
Patricia Liminana, David Garcia-Sanoguera, Luis Quiles-Carrillo, Rafael Balart-Gimeno, Nestor Montanes
Optimization of Maleinized Linseed Oil Loading as a Biobased Compatibilizer in Poly(Butylene Succinate) Composites with Almond Shell Flour. Materials (Basel, Switzerland) 12 (5) (2019)
Maria Jorda, Sergi Montava-Jorda, Rafael Balart-Gimeno, Diego Lascano, Nestor Montanes, Luis Quiles-Carrillo
Functionalization of Partially Bio-Based Poly(Ethylene Terephthalate) by Blending with Fully Bio-Based Poly(Amide) 10,10 and a Glycidyl Methacrylate-Based Compatibilizer. Polymers 11 (8) (2019)
Patricia Liminana, Luis Quiles-Carrillo, Teodomiro Boronat, Rafael Balart-Gimeno, Nestor Montanes
The Effect of Varying Almond Shell Flour (ASF) Loading in Composites with Poly(Butylene Succinate (PBS) Matrix Compatibilized with Maleinized Linseed Oil (MLO). Materials (Basel, Switzerland) 11 (11) (2018)
Luis Quiles-Carrillo, Nestor Montanes, Fede Pineiro, Amparo Jorda-Vilaplana, Sergio Torres-Giner
Ductility and Toughness Improvement of Injection-Molded Compostable Pieces of Polylactide by Melt Blending with Poly(ε-caprolactone) and Thermoplastic Starch. Materials (Basel, Switzerland) 11 (11) (2018)