Miroslav Muller (Miroslav Müller)

Scopus Author ID ResearcherID ORCID

Publication Activity (10 Years)

Years Active: 2019-2023
Publications (10 Years): 27

Top Venues

Polymers

Materials (Basel, Switzerland)

Czech University of Life Sciences Prague

Czech University of Life Sciences Prague (PHD)

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Czech University of Life Sciences Prague

Czechia

Head of department :: Department of Material Science and Manufacturing Technology

Education History

Czech University of Life Sciences Prague

Czechia

PHD

Publications

Hafsa Jamshaid, Rajesh Kumar Mishra, Vijay Chandan, Shabnam Nazari, Muhammad Shoaib, Laurent Bizet, Petr Jirku, Miroslav Muller, Rostislav Choteborsky
Hybrid Thermoplastic Composites from Basalt- and Kevlar-Woven Fabrics: Comparative Analysis of Mechanical and Thermomechanical Performance. Polymers 15 (7) (2023)
Viktor Kolář, Petr Hrabě, Miroslav Muller, Monika Hromasova, David Herák, Hadi Sutanto
Influence of Alkali Treatment of Jatropha Curcas L. Filler on the Service Life of Hybrid Adhesive Bonds under Low Cycle Loading. Polymers 15 (2) (2023)
Hafsa Jamshaid, Rajesh Kumar Mishra, Vijay Chandan, Shabnam Nazari, Muhammad Shoaib, Laurent Bizet, Tatiana Alexiou Ivanova, Miroslav Muller, Petr Valasek
Mechanical and Thermo-Mechanical Performance of Natural Fiber-Based Single-Ply and 2-Ply Woven Prepregs. Polymers 15 (4) (2023)
Viktor Kolář, Petr Hrabě, Miroslav Muller, Monika Hromasova, David Herák, Hadi Sutanto
Influence of Alkali Treatment of Jatropha Curcas L. Filler on the Service Life of Hybrid Adhesive Bonds under Low Cycle Loading. Polymers 15 (2) (2023)
Vijay Chandan, Rajesh Kumar Mishra, Viktor Kolář, Petr Jirků, Miroslav Muller, Hafsa Jamshaid
Numerical and Experimental Analysis of Mechanical Properties in Hybrid Epoxy-Basalt Composites Partially Reinforced with Cellulosic Fillers. Materials (Basel, Switzerland) 16 (14) (2023)
Miroslav Muller, Monika Hromasova, Petr Valasek, Iva Nováková, Jaromír Moravec, Milan Jelínek
Tribological Behaviour of Enamel Coatings Created by a Prototype Device for Local Repair of Inorganic Surfaces. Materials (Basel, Switzerland) 16 (3) (2023)
Viktor Kolář, Petr Hrabě, Miroslav Muller, Monika Hromasova, David Herák, Hadi Sutanto
Influence of Alkali Treatment of Jatropha Curcas L. Filler on the Service Life of Hybrid Adhesive Bonds under Low Cycle Loading. Polymers 15 (2) (2023)
Petr Jirků, Jiří Urban, Miroslav Muller, Viktor Kolář, Vijay Chandan, Jaroslava Svobodová, Rajesh Kumar Mishra, Hafsa Jamshaid
Evaluation of Mechanical Properties and Filler Interaction in the Field of SLA Polymeric Additive Manufacturing. Materials (Basel, Switzerland) 16 (14) (2023)
Miroslav Muller, Monika Hromasova, Petr Valasek, Iva Nováková, Jaromír Moravec, Milan Jelínek
Tribological Behaviour of Enamel Coatings Created by a Prototype Device for Local Repair of Inorganic Surfaces. Materials (Basel, Switzerland) 16 (3) (2023)
Hafsa Jamshaid, Rajesh Kumar Mishra, Vijay Chandan, Shabnam Nazari, Muhammad Shoaib, Laurent Bizet, Tatiana Alexiou Ivanova, Miroslav Muller, Petr Valasek
Mechanical and Thermo-Mechanical Performance of Natural Fiber-Based Single-Ply and 2-Ply Woven Prepregs. Polymers 15 (4) (2023)
Miroslav Muller, Vladimír Šleger, Viktor Kolář, Monika Hromasova, Dominik Piš, Rajesh Kumar Mishra
Low-Cycle Fatigue Behavior of 3D-Printed PLA Reinforced with Natural Filler. Polymers 14 (7) (2022)
Rajesh Kumar Mishra, Bijoya Kumar Behera, Vijay Chandan, Shabnam Nazari, Miroslav Muller
Modeling and Simulation of Mechanical Performance in Textile Structural Concrete Composites Reinforced with Basalt Fibers. Polymers 14 (19) (2022)
Miroslav Muller, Petr Jirků, Vladimír Šleger, Rajesh Kumar Mishra, Monika Hromasova, Jan Novotný
Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material. Polymers 14 (22) (2022)
Hafsa Jamshaid, Rajesh Kumar Mishra, Naseer Ahmad, Muhammad Nadeem, Miroslav Muller, Viktor Kolář
Exploration of Effects of Graduated Compression Stocking Structures on Performance Properties Using Principal Component Analysis: A Promising Method for Simultaneous Optimization of Properties. Polymers 14 (10) (2022)
Miroslav Muller, Vladimír Šleger, Jakub Čedík, Martin Pexa
Research on the Material Compatibility of Elastomer Sealing O-Rings. Polymers 14 (16) (2022)
Petr Hrabě, Viktor Kolář, Miroslav Muller, Monika Hromasova
Service Life of Adhesive Bonds under Cyclic Loading with a Filler Based on Natural Waste from Coconut Oil Production. Polymers 14 (5) (2022)
Tomáš Božák, Miroslav Muller, Viktor Kolář, Martin Tichy, Jaroslava Svobodová, Štefan Michna
Research on Low-Cycle Fatigue Engineered Hybrid Sandwich Ski Construction. Polymers 14 (11) (2022)
Hafsa Jamshaid, Rajesh Kumar Mishra, Ali Raza, Uzair Hussain, Md Lutfor Rahman, Shabnam Nazari, Vijay Chandan, Miroslav Muller, Rostislav Choteborsky
Natural Cellulosic Fiber Reinforced Concrete: Influence of Fiber Type and Loading Percentage on Mechanical and Water Absorption Performance. Materials (Basel, Switzerland) 15 (3) (2022)
Muhammad Rizwan Tufail, Hafsa Jamshaid, Rajesh Kumar Mishra, Uzair Hussain, Martin Tichy, Miroslav Muller
Characterization of Hybrid Composites with Polyester Waste Fibers, Olive Root Fibers and Coir Pith Micro-Particles Using Mixture Design Analysis for Structural Applications. Polymers 13 (14) (2021)
Petr Valášek, Miroslav Muller, Vladimír Šleger, Viktor Kolář, Monika Hromasova, Roberto D'Amato, Alessandro Ruggiero
Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers. Materials (Basel, Switzerland) 14 (10) (2021)
Rajesh Kumar Mishra, Bijoy Kumar Behera, Sayan Mukherjee, Michal Petru, Miroslav Muller
Axial and Radial Compression Behavior of Composite Rocket Launcher Developed by Robotized Filament Winding: Simulation and Experimental Validation. Polymers 13 (4) (2021)
Izabela Miturska-Barańska, Anna Rudawska, Miroslav Muller, Monika Hromasova
The Influence of Mixing Methods of Epoxy Composition Ingredients on Selected Mechanical Properties of Modified Epoxy Construction Materials. Materials (Basel, Switzerland) 14 (2) (2021)
Miroslav Muller, Viktor Kolář, Jan Šulc, Rajesh Kumar Mishra, Monika Hromasova, Bijoya Kumar Behera
Effect of Waterjet Machining Parameters on the Cut Quality of PP and PVC-U Materials Coated with Polyurethane and Acrylate Coatings. Materials (Basel, Switzerland) 14 (24) (2021)
Viktor Kolář, Miroslav Muller, Martin Tichy, Rajesh Kumar Mishra, Petr Hrabě, Kristýna Hanušová, Monika Hromasova
Experimental Investigation of Wavy-Lap Bonds with Natural Cotton Fabric Reinforcement under Cyclic Loading. Polymers 13 (17) (2021)
Zunjarrao Kamble, Rajesh Kumar Mishra, Bijoya Kumar Behera, Martin Tichy, Viktor Kolář, Miroslav Muller
Design, Development, and Characterization of Advanced Textile Structural Hollow Composites. Polymers 13 (20) (2021)
Hafsa Jamshaid, Rajesh Kumar Mishra, Muhammad Zeeshan, Bilal Zahid, Sikandar Abbas Basra, Martin Tichy, Miroslav Muller
Mechanical Performance of Knitted Hollow Composites from Recycled Cotton and Glass Fibers for Packaging Applications. Polymers 13 (14) (2021)
Miroslav Muller, Petr Valášek, Viktor Kolář, Vladimír Šleger, Gürkan Alp Kagan Gürdil, Monika Hromasova, Sergej Hloch, Jaromír Moravec, Martin Pexa
Material Utilization of Cotton Post-Harvest Line Residues in Polymeric Composites. Polymers 11 (7) (2019)

Miroslav Muller.css-eqlu8i{font-size:small;padding-left:4px;} (Miroslav Müller)

Publication Activity (10 Years)

Top Topics

Top Venues

Miroslav Muller (Miroslav Müller)