Monika Hromasova (Monika Hromasová)

Scopus Author ID ResearcherID Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2019-2023
Publications (10 Years): 16

Top Venues

Polymers

Materials (Basel, Switzerland)

Czech University of Life Sciences Prague

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Czech University of Life Sciences Prague Nov 15o 2018

Czechia

Ing., Ph.D. :: Department of Electrical Engineering and Automation

Publications

Viktor Kolář, Petr Hrabě, Miroslav Muller, Monika Hromasova, David Herák, Hadi Sutanto
Influence of Alkali Treatment of Jatropha Curcas L. Filler on the Service Life of Hybrid Adhesive Bonds under Low Cycle Loading. Polymers 15 (2) (2023)
Viktor Kolář, Petr Hrabě, Miroslav Muller, Monika Hromasova, David Herák, Hadi Sutanto
Influence of Alkali Treatment of Jatropha Curcas L. Filler on the Service Life of Hybrid Adhesive Bonds under Low Cycle Loading. Polymers 15 (2) (2023)
Miroslav Muller, Monika Hromasova, Petr Valasek, Iva Nováková, Jaromír Moravec, Milan Jelínek
Tribological Behaviour of Enamel Coatings Created by a Prototype Device for Local Repair of Inorganic Surfaces. Materials (Basel, Switzerland) 16 (3) (2023)
Viktor Kolář, Petr Hrabě, Miroslav Muller, Monika Hromasova, David Herák, Hadi Sutanto
Influence of Alkali Treatment of Jatropha Curcas L. Filler on the Service Life of Hybrid Adhesive Bonds under Low Cycle Loading. Polymers 15 (2) (2023)
Miroslav Muller, Monika Hromasova, Petr Valasek, Iva Nováková, Jaromír Moravec, Milan Jelínek
Tribological Behaviour of Enamel Coatings Created by a Prototype Device for Local Repair of Inorganic Surfaces. Materials (Basel, Switzerland) 16 (3) (2023)
Miroslav Muller, Vladimír Šleger, Viktor Kolář, Monika Hromasova, Dominik Piš, Rajesh Kumar Mishra
Low-Cycle Fatigue Behavior of 3D-Printed PLA Reinforced with Natural Filler. Polymers 14 (7) (2022)
Miroslav Muller, Petr Jirků, Vladimír Šleger, Rajesh Kumar Mishra, Monika Hromasova, Jan Novotný
Effect of Infill Density in FDM 3D Printing on Low-Cycle Stress of Bamboo-Filled PLA-Based Material. Polymers 14 (22) (2022)
Petr Hrabě, Viktor Kolář, Miroslav Muller, Monika Hromasova
Service Life of Adhesive Bonds under Cyclic Loading with a Filler Based on Natural Waste from Coconut Oil Production. Polymers 14 (5) (2022)
Petr Valášek, Miroslav Muller, Vladimír Šleger, Viktor Kolář, Monika Hromasova, Roberto D'Amato, Alessandro Ruggiero
Influence of Alkali Treatment on the Microstructure and Mechanical Properties of Coir and Abaca Fibers. Materials (Basel, Switzerland) 14 (10) (2021)
Izabela Miturska-Barańska, Anna Rudawska, Miroslav Muller, Monika Hromasova
The Influence of Mixing Methods of Epoxy Composition Ingredients on Selected Mechanical Properties of Modified Epoxy Construction Materials. Materials (Basel, Switzerland) 14 (2) (2021)
Miroslav Muller, Viktor Kolář, Jan Šulc, Rajesh Kumar Mishra, Monika Hromasova, Bijoya Kumar Behera
Effect of Waterjet Machining Parameters on the Cut Quality of PP and PVC-U Materials Coated with Polyurethane and Acrylate Coatings. Materials (Basel, Switzerland) 14 (24) (2021)
Viktor Kolář, Miroslav Muller, Martin Tichy, Rajesh Kumar Mishra, Petr Hrabě, Kristýna Hanušová, Monika Hromasova
Experimental Investigation of Wavy-Lap Bonds with Natural Cotton Fabric Reinforcement under Cyclic Loading. Polymers 13 (17) (2021)
Martin Tichy, Viktor Kolář, Miroslav Müller, Rajesh Kumar Mishra, Vladimír Šleger, Monika Hromasova
Quasi-Static Shear Test of Hybrid Adhesive Bonds Based on Treated Cotton-Epoxy Resin Layer. Polymers 12 (12) (2020)
Viktor Kolář, Miroslav Müller, Rajesh Kumar Mishra, Anna Rudawska, Vladimír Šleger, Martin Tichý, Monika Hromasova, Petr Valášek
Quasi-Static Tests of Hybrid Adhesive Bonds Based on Biological Reinforcement in the Form of Eggshell Microparticles. Polymers 12 (6) (2020)
Tufail Hassan, Hafsa Jamshaid, Rajesh Kumar Mishra, Muhammad Qamar Khan, Michal Petru, Jan Novak, Rostislav Choteborsky, Monika Hromasova
Acoustic, Mechanical and Thermal Properties of Green Composites Reinforced with Natural Fibers Waste. Polymers 12 (3) (2020)
Miroslav Muller, Petr Valášek, Viktor Kolář, Vladimír Šleger, Gürkan Alp Kagan Gürdil, Monika Hromasova, Sergej Hloch, Jaromír Moravec, Martin Pexa
Material Utilization of Cotton Post-Harvest Line Residues in Polymeric Composites. Polymers 11 (7) (2019)

Monika Hromasova.css-eqlu8i{font-size:small;padding-left:4px;} (Monika Hromasová)

Publication Activity (10 Years)

Top Topics

Top Venues

Monika Hromasova (Monika Hromasová)