Moises Batista (M Batista, Moises Batista Ponce, Moisés Batista Ponce, Moisés Batista)

Scopus Author ID ResearcherID ORCID

Publication Activity (10 Years)

Years Active: 2018-2024
Publications (10 Years): 14

Top Venues

Materials (Basel, Switzerland)

Polymers

Scientific reports

Universidad de Cádiz

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Universidad de Cádiz Apr 20 2015

Spain

Profesor Ayudante Doctor :: Ingeniería Mecánica y Diseño Industrial

Publications

Moises Batista, Irene Del Sol, Álvaro Gómez-Parra, Juan Manuel Vázquez Martínez
Tribological Performance of Additive Manufactured PLA-Based Parts. Polymers 16 (17) (2024)
Juan Manuel Vázquez Martínez, D Piñero, Jorge Salguero Gómez, Moises Batista
Evaluation of the Joining Response of Biodegradable Polylactic Acid (PLA) from Fused Deposition Modeling by Infrared Laser Irradiation. Polymers 12 (11) (2020)
David Repeto, Severo Raul Fernandez-Vidal, Pedro F Mayuet Ares, Jorge Salguero Gómez, Moises Batista
On the Machinability of an Al-63%SiC Metal Matrix Composite. Materials (Basel, Switzerland) 13 (5) (2020)
Magdalena Ramirez-Peña, Pedro F Mayuet Ares, Juan Manuel Vázquez Martínez, Moises Batista
Sustainability in the Aerospace, Naval, and Automotive Supply Chain 4.0: Descriptive Review. Materials (Basel, Switzerland) 13 (24) (2020)
Moises Batista, Juan Manuel Vázquez Martínez, Joao Paulo Davim, Jorge Salguero Gómez
Analysis of Secondary Adhesion Wear Mechanism on Hard Machining of Titanium Aerospace Alloy. Materials (Basel, Switzerland) 12 (12) (2019)
Ana Pilar Valerga, Moises Batista, Severo Raul Fernandez-Vidal, Antonio Juan Gamez
Impact of Chemical Post-Processing in Fused Deposition Modelling (FDM) on Polylactic Acid (PLA) Surface Quality and Structure. Polymers 11 (3) (2019)
Alejandro Sambruno, Fermin Bañon, Jorge Salguero Gómez, Bartolome Simonet, Moises Batista
Kerf Taper Defect Minimization Based on Abrasive Waterjet Machining of Low Thickness Thermoplastic Carbon Fiber Composites C/TPU. Materials (Basel, Switzerland) 12 (24) (2019)
Pedro F Mayuet Ares, Franck Girot Mata, Moises Batista, Jorge Salguero Gómez
Defect Analysis and Detection of Cutting Regions in CFRP Machining Using AWJM. Materials (Basel, Switzerland) 12 (24) (2019)
Magdalena Ramirez-Peña, Francisco J Abad Fraga, Alejandro J Sánchez Sotano, Moises Batista
Shipbuilding 4.0 Index Approaching Supply Chain. Materials (Basel, Switzerland) 12 (24) (2019)
Jorge Salguero Gómez, Juan Manuel Vázquez Martínez, Irene Del Sol, Moises Batista
Application of Pin-On-Disc Techniques for the Study of Tribological Interferences in the Dry Machining of A92024-T3 (Al⁻Cu) Alloys. Materials (Basel, Switzerland) 11 (7) (2018)
Moises Batista, Irene Del Sol, Severo Raul Fernandez-Vidal, Jorge Salguero Gómez
Experimental Parametric Model for Adhesion Wear Measurements in the Dry Turning of an AA2024 Alloy. Materials (Basel, Switzerland) 11 (9) (2018)
Ana Pilar Valerga, Moises Batista, Jorge Salguero Gómez, Franck Andrés Girot Mata
Influence of PLA Filament Conditions on Characteristics of FDM Parts. Materials (Basel, Switzerland) 11 (8) (2018)
Lionel Cervera Gontard, Moises Batista, Jorge Salguero Gómez, José J Calvino
Three-dimensional chemical mapping using non-destructive SEM and photogrammetry. Scientific reports 8 (1) (2018)
Severo Raul Fernandez-Vidal, Sergio Fernandez-Vidal, Moises Batista, Jorge Salguero Gómez
Tool Wear Mechanism in Cutting of Stack CFRP/UNS A97075. Materials (Basel, Switzerland) 11 (8) (2018)

Moises Batista.css-eqlu8i{font-size:small;padding-left:4px;} (M Batista, Moises Batista Ponce, Moisés Batista Ponce, Moisés Batista)

Publication Activity (10 Years)

Top Topics

Top Venues

Moises Batista (M Batista, Moises Batista Ponce, Moisés Batista Ponce, Moisés Batista)