Ricardo João Camilo Carbas (Ricardo Carbas, Ricardo J C Carbas)

Scopus Author ID ResearcherID Ciência ID ORCID

Publication Activity (10 Years)

Years Active: 2020-2024
Publications (10 Years): 52

Top Topics

Top Venues

Materials (Basel, Switzerland)

Sensors (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Caio Adler, Pedro Morais, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Eduardo A S Marques, Bala Karunamurthy, Lucas Filipe Martins da Silva
Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach. Materials (Basel, Switzerland) 17 (2) (2024)
Daniel S Correia, Inês D Costa, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Development of a Unified Specimen for Adhesive Characterization-Part 2: Experimental Study on the Mode I (mDCB) and II (ELS) Fracture Components. Materials (Basel, Switzerland) 17 (5) (2024)
Hossein Malekinejad, Farin Ramezani, Ricardo João Camilo Carbas, Eduardo A S Marques, Lucas Filipe Martins da Silva
Study of CFRP Laminate Gradually Modified throughout the Thickness Using Thin Ply under Transvers Tensile Loading. Materials (Basel, Switzerland) 17 (10) (2024)
Shahin Jalali, Catarina da Silva Pereira Borges, Ricardo João Camilo Carbas, Eduardo André de Sousa Marques, Alireza Akhavan-Safar, Ana Sofia Oliveira Ferreira Barbosa, João Carlos Moura Bordado, Lucas Filipe Martins da Silva
A Novel Technique for Substrate Toughening in Wood Single Lap Joints Using a Zero-Thickness Bio-Adhesive. Materials (Basel, Switzerland) 17 (2) (2024)
Caio Adler, Pedro Morais, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Eduardo A S Marques, Bala Karunamurthy, Lucas Filipe Martins da Silva
Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach. Materials (Basel, Switzerland) 17 (2) (2024)
Caio Adler, Pedro Morais, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Eduardo A S Marques, Bala Karunamurthy, Lucas Filipe Martins da Silva
Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach. Materials (Basel, Switzerland) 17 (2) (2024)
Pedro Morais, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Eduardo A S Marques, Bala Karunamurthy, Lucas Filipe Martins da Silva
Mode I Fatigue and Fracture Assessment of Polyimide-Epoxy and Silicon-Epoxy Interfaces in Chip-Package Components. Polymers 16 (4) (2024)
Mazaher Salamat-Talab, Ali Zeinolabedin-Beygi, Faraz Soltani, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Tensile Strength and Mode I Fracture Toughness of Polymer Concretes Enhanced with Glass Fibers and Metal Chips. Materials (Basel, Switzerland) 17 (9) (2024)
Mazaher Salamat-Talab, Ali Zeinolabedin-Beygi, Faraz Soltani, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Tensile Strength and Mode I Fracture Toughness of Polymer Concretes Enhanced with Glass Fibers and Metal Chips. Materials (Basel, Switzerland) 17 (9) (2024)
Daniel S Correia, Inês D Costa, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Development of a Unified Specimen for Adhesive Characterization-Part 2: Experimental Study on the Mode I (mDCB) and II (ELS) Fracture Components. Materials (Basel, Switzerland) 17 (5) (2024)
Tomas Nunes, Maria J P Ribas, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Eduardo A S Marques, Sabine Wenig, Lucas Filipe Martins da Silva
Fracture Analysis of Highly Flexible Adhesives: Cohesive Zone Modelling across a Wide Spectrum of Temperatures and Strain Rates. Polymers 16 (16) (2024)
Hossein Malekinejad, Farin Ramezani, Ricardo João Camilo Carbas, Eduardo A S Marques, Lucas Filipe Martins da Silva
Study of CFRP Laminate Gradually Modified throughout the Thickness Using Thin Ply under Transvers Tensile Loading. Materials (Basel, Switzerland) 17 (10) (2024)
Shahin Jalali, Catarina da Silva Pereira Borges, Ricardo João Camilo Carbas, Eduardo André de Sousa Marques, Alireza Akhavan-Safar, Ana Sofia Oliveira Ferreira Barbosa, João Carlos Moura Bordado, Lucas Filipe Martins da Silva
A Novel Technique for Substrate Toughening in Wood Single Lap Joints Using a Zero-Thickness Bio-Adhesive. Materials (Basel, Switzerland) 17 (2) (2024)
Shahin Jalali, Catarina da Silva Pereira Borges, Ricardo João Camilo Carbas, Eduardo André de Sousa Marques, Alireza Akhavan-Safar, Ana Sofia Oliveira Ferreira Barbosa, João Carlos Moura Bordado, Lucas Filipe Martins da Silva
A Novel Technique for Substrate Toughening in Wood Single Lap Joints Using a Zero-Thickness Bio-Adhesive. Materials (Basel, Switzerland) 17 (2) (2024)
Pedro Morais, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Eduardo A S Marques, Bala Karunamurthy, Lucas Filipe Martins da Silva
Mode I Fatigue and Fracture Assessment of Polyimide-Epoxy and Silicon-Epoxy Interfaces in Chip-Package Components. Polymers 16 (4) (2024)
Daniel S Correia, Inês D Costa, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Development of a Unified Specimen for Adhesive Characterization-Part 2: Experimental Study on the Mode I (mDCB) and II (ELS) Fracture Components. Materials (Basel, Switzerland) 17 (5) (2024)
Bernardo S Moreira, Paulo D P Nunes, Carlos M da Silva, António Francisco G Tenreiro, António Mendes Lopes, Ricardo João Camilo Carbas, Eduardo André de Sousa Marques, Marco P L Parente, Lucas Filipe Martins da Silva
Numerical Design of a Thread-Optimized Gripping System for Lap Joint Testing in a Split Hopkinson Apparatus. Sensors (Basel, Switzerland) 23 (4) (2023)
Daniel S Correia, Inês D Costa, Beatriz D Simões, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Development of a Unified Specimen for Adhesive Characterisation-Part 1: Numerical Study on the Mode I (mDCB) and II (ELS) Fracture Components. Materials (Basel, Switzerland) 16 (8) (2023)
Maria João Calheiros-Lobo, Tatiana Vieira, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva, Teresa Pinho
Effectiveness of Self-Adhesive Resin Luting Cement in CAD-CAM Blocks-A Systematic Review and Meta-Analysis. Materials (Basel, Switzerland) 16 (8) (2023)
Beatriz D Simões, Élio M D Fernandes, Eduardo A S Marques, Ricardo João Camilo Carbas, Steven Maul, Patrick Stihler, Philipp Weißgraeber, Lucas Filipe Martins da Silva
An Exploratory Study on Determining and Modeling the Creep Behavior of an Acrylic Pressure-Sensitive Adhesive. Materials (Basel, Switzerland) 16 (5) (2023)
João P J R Santos, Daniel S Correia, Eduardo A S Marques, Ricardo João Camilo Carbas, Frida Gilbert, Lucas Filipe Martins da Silva
Extended Finite Element Method (XFEM) Model for the Damage Mechanisms Present in Joints Bonded Using Adhesives Doped with Inorganic Fillers. Materials (Basel, Switzerland) 16 (23) (2023)
Maria J P Ribas, Alireza Akhavan-Safar, Nicolas Pigray, Ricardo João Camilo Carbas, Eduardo A S Marques, Catarina S P Borges, Sabine Wenig, Lucas Filipe Martins da Silva
From High Strain Rates to Elevated Temperatures: Investigating Mixed-Mode Fracture Behaviour in a Polyurethane Adhesive. Polymers 15 (12) (2023)
Maria J P Ribas, Alireza Akhavan-Safar, Nicolas Pigray, Ricardo João Camilo Carbas, Eduardo A S Marques, Catarina S P Borges, Sabine Wenig, Lucas Filipe Martins da Silva
From High Strain Rates to Elevated Temperatures: Investigating Mixed-Mode Fracture Behaviour in a Polyurethane Adhesive. Polymers 15 (12) (2023)
Maria João Calheiros-Lobo, Tatiana Vieira, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva, Teresa Pinho
Effectiveness of Self-Adhesive Resin Luting Cement in CAD-CAM Blocks-A Systematic Review and Meta-Analysis. Materials (Basel, Switzerland) 16 (8) (2023)
Daniel S Correia, Inês D Costa, Beatriz D Simões, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Development of a Unified Specimen for Adhesive Characterisation-Part 1: Numerical Study on the Mode I (mDCB) and II (ELS) Fracture Components. Materials (Basel, Switzerland) 16 (8) (2023)
Mazaher Salamat-Talab, Alireza Akhavan-Safar, Ali Zeinolabedin-Beygi, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Effect of Through-the-Thickness Delamination Position on the R-Curve Behavior of Plain-Woven ENF Specimens. Materials (Basel, Switzerland) 16 (5) (2023)
Beatriz D Simões, Eduardo A S Marques, Ricardo João Camilo Carbas, Steven Maul, P Stihler, Philipp Weißgraeber, Lucas Filipe Martins da Silva
Rheological and Mechanical Properties of an Acrylic PSA. Polymers 15 (18) (2023)
Mazaher Salamat-Talab, Alireza Akhavan-Safar, Ali Zeinolabedin-Beygi, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva
Effect of Through-the-Thickness Delamination Position on the R-Curve Behavior of Plain-Woven ENF Specimens. Materials (Basel, Switzerland) 16 (5) (2023)
Catarina S P Borges, Eduardo A S Marques, Ricardo João Camilo Carbas, Alireza Akhavan-Safar, Christoph Ueffing, Philipp Weißgraeber, Lucas Filipe Martins da Silva
Effect of the Interface/Interphase on the Water Ingress Properties of Joints with PBT-GF30 and Aluminum Substrates Using Silicone Adhesive. Polymers 15 (4) (2023)
Catarina S P Borges, Eduardo A S Marques, Ricardo João Camilo Carbas, Alireza Akhavan-Safar, Christoph Ueffing, Philipp Weißgraeber, Lucas Filipe Martins da Silva
Effect of the Interface/Interphase on the Water Ingress Properties of Joints with PBT-GF30 and Aluminum Substrates Using Silicone Adhesive. Polymers 15 (4) (2023)
Vasco C M B Rodrigues, Eduardo A S Marques, Ricardo João Camilo Carbas, Michael Youngberg, Anne Dussaud, Reza Beygi, Lucas Filipe Martins da Silva
Development and Study of a New Silane Based Polyurethane Hybrid Flexible Adhesive-Part 1: Mechanical Characterization. Materials (Basel, Switzerland) 16 (23) (2023)
Vasco C M B Rodrigues, Eduardo A S Marques, Ricardo João Camilo Carbas, Michael Youngberg, Anne Dussaud, Reza Beygi, Lucas Filipe Martins da Silva
The Development and Study of a New Silylated Polyurethane-Based Flexible Adhesive-Part 2: Joint Testing and Numerical Modelling. Materials (Basel, Switzerland) 16 (21) (2023)
Maria João Calheiros-Lobo, Tatiana Vieira, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva, Teresa Pinho
Effectiveness of Self-Adhesive Resin Luting Cement in CAD-CAM Blocks-A Systematic Review and Meta-Analysis. Materials (Basel, Switzerland) 16 (8) (2023)
Farin Ramezani, Beatriz D Simões, Ricardo João Camilo Carbas, Eduardo A S Marques, Lucas Filipe Martins da Silva
Developments in Laminate Modification of Adhesively Bonded Composite Joints. Materials (Basel, Switzerland) 16 (2) (2023)
Maria João Calheiros-Lobo, Tatiana Vieira, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva, Teresa Pinho
Effectiveness of Self-Adhesive Resin Luting Cement in CAD-CAM Blocks-A Systematic Review and Meta-Analysis. Materials (Basel, Switzerland) 16 (8) (2023)
Beatriz D Simões, Élio M D Fernandes, Eduardo A S Marques, Ricardo João Camilo Carbas, Steven Maul, Patrick Stihler, Philipp Weißgraeber, Lucas Filipe Martins da Silva
An Exploratory Study on Determining and Modeling the Creep Behavior of an Acrylic Pressure-Sensitive Adhesive. Materials (Basel, Switzerland) 16 (5) (2023)
Farin Ramezani, Beatriz D Simões, Ricardo João Camilo Carbas, Eduardo A S Marques, Lucas Filipe Martins da Silva
Developments in Laminate Modification of Adhesively Bonded Composite Joints. Materials (Basel, Switzerland) 16 (2) (2023)
Hossein Malekinejad, Ricardo João Camilo Carbas, Alireza Akhavan-Safar, Eduardo A S Marques, Fernando Castro Sousa, Lucas Filipe Martins da Silva
Enhancing Fatigue Life and Strength of Adhesively Bonded Composite Joints: A Comprehensive Review. Materials (Basel, Switzerland) 16 (19) (2023)
Bernardo S Moreira, Paulo D P Nunes, Carlos M da Silva, António Francisco G Tenreiro, António Mendes Lopes, Ricardo João Camilo Carbas, Eduardo André de Sousa Marques, Marco P L Parente, Lucas Filipe Martins da Silva
Numerical Design of a Thread-Optimized Gripping System for Lap Joint Testing in a Split Hopkinson Apparatus. Sensors (Basel, Switzerland) 23 (4) (2023)
Shahin Jalali, Catarina da Silva Pereira Borges, Ricardo João Camilo Carbas, Eduardo André de Sousa Marques, João Carlos Moura Bordado, Lucas Filipe Martins da Silva
Characterization of Densified Pine Wood and a Zero-Thickness Bio-Based Adhesive for Eco-Friendly Structural Applications. Materials (Basel, Switzerland) 16 (22) (2023)
Farin Ramezani, Ricardo João Camilo Carbas, Eduardo A S Marques, Lucas Filipe Martins da Silva
Study of Hybrid Composite Joints with Thin-Ply-Reinforced Adherends. Materials (Basel, Switzerland) 16 (11) (2023)
Mael Perez, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Eduardo A S Marques, Sabine Wenig, Lucas F M da Silva
Loading Rate and Temperature Interaction Effects on the Mode I Fracture Response of a Ductile Polyurethane Adhesive Used in the Automotive Industry. Materials (Basel, Switzerland) 15 (24) (2022)
Catarina S P Borges, Shahin Jalali, Panayiotis Tsokanas, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas F M da Silva
Sustainable Development Approaches through Wooden Adhesive Joints Design. Polymers 15 (1) (2022)
Catarina S P Borges, Shahin Jalali, Panayiotis Tsokanas, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas F M da Silva
Sustainable Development Approaches through Wooden Adhesive Joints Design. Polymers 15 (1) (2022)
João P J R Santos, Daniel S Correia, Eduardo A S Marques, Ricardo João Camilo Carbas, Frida Gilbert, Lucas F M da Silva
Characterization of the Effect of Hollow Glass Beads on the Mechanical Properties of Structural Adhesives. Materials (Basel, Switzerland) 15 (11) (2022)
Catarina S P Borges, Shahin Jalali, Panayiotis Tsokanas, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas F M da Silva
Sustainable Development Approaches through Wooden Adhesive Joints Design. Polymers 15 (1) (2022)
Beatriz D Simões, Paulo D P Nunes, Farin Ramezani, Ricardo João Camilo Carbas, Eduardo A S Marques, Lucas F M da Silva
Experimental and Numerical Study of Thermal Residual Stresses on Multimaterial Adherends in Single-Lap Joints. Materials (Basel, Switzerland) 15 (23) (2022)
Beatriz D Simões, Paulo D P Nunes, Farin Ramezani, Ricardo João Camilo Carbas, Eduardo A S Marques, Lucas F M da Silva
Experimental and Numerical Study of Thermal Residual Stresses on Multimaterial Adherends in Single-Lap Joints. Materials (Basel, Switzerland) 15 (23) (2022)
Beatriz D Simões, Paulo D P Nunes, Farin Ramezani, Ricardo João Camilo Carbas, Eduardo A S Marques, Lucas F M da Silva
Experimental and Numerical Study of Thermal Residual Stresses on Multimaterial Adherends in Single-Lap Joints. Materials (Basel, Switzerland) 15 (23) (2022)
Luis M R M Corte-Real, Shahin Jalali, Catarina S P Borges, Eduardo A S Marques, Ricardo João Camilo Carbas, Lucas F M da Silva
Development and Characterisation of Joints with Novel Densified and Wood/Cork Composite Substrates. Materials (Basel, Switzerland) 15 (20) (2022)
Mael Perez, Alireza Akhavan-Safar, Ricardo João Camilo Carbas, Eduardo A S Marques, Sabine Wenig, Lucas F M da Silva
Loading Rate and Temperature Interaction Effects on the Mode I Fracture Response of a Ductile Polyurethane Adhesive Used in the Automotive Industry. Materials (Basel, Switzerland) 15 (24) (2022)
Mattia Frascio, Eduardo André de Sousa Marques, Ricardo João Camilo Carbas, Lucas Filipe Martins da Silva, Margherita Monti, Massimiliano Avalle
Review of Tailoring Methods for Joints with Additively Manufactured Adherends and Adhesives. Materials (Basel, Switzerland) 13 (18) (2020)