An Exploratory Study on Determining and Modeling the Creep Behavior of an Acrylic Pressure-Sensitive Adhesive.

In the present paper, an exploratory study on the creep behavior of a pressure sensitive adhesive (PSA) is performed. After the determination of the quasi-static behavior of the adhesive for bulk specimens and single lap joints (SLJ), SLJs were subjected to creep tests at 80%, 60%, and 30% of their respective failure load. It was verified that the durability of the joints increases under static creep conditions as the load level decreases, with the second phase of the creep curve becoming more pronounced, where the strain rate is close to zero. In addition, cyclic creep tests were performed for the 30% load level at a frequency of 0.04 Hz. Finally, an analytical model was applied to the experimental results in order to reproduce the values obtained for both static and cyclic tests. The model was found to be effective, reproducing the three phases of the curves which allowed for the characterization of the full creep curve, something not commonly found in the literature, especially for PSAs.