E12 technique: Conventional epoxy resin sheet plastination.

Epoxy plastination techniques were developed to obtain thin transparent body slices with high anatomical detail. This is facilitated because the plastinated tissue is transparent and the topography of the anatomical structures well preserved. For this reason, thin epoxy slices are currently used for research purposes in both macroscopic and microscopic studies. The protocol for the conventional epoxy technique (E12) follows the main steps of plastination-specimen preparation, dehydration, impregnation and curing/casting. Preparation begins with selection of the specimen, followed by freezing and slicing. Either fresh or fixed (embalmed) tissue is suitable for epoxy plastination, while slice thickness is kept between 1.5 and 3 mm. Impregnation mixture is made of epoxy E12 resin plus E1 hardener (100 ppw; 28 ppw). This mixture is reactive and temperature sensitive, and for this reason, total impregnation time under vacuum at room laboratory temperature should not last for more than 20-24 hr. Casting of impregnated slices is done in either flat chambers or by the so-called sandwich method in either fresh mixture or the one used for impregnation. Curing is completed at 40°C to allow a complete polymerization of the epoxy-mixture. After curing, slices can be photographed, scanned or used for anatomical study under screen negatoscope, magnification glass or fluorescent microscope. Based on epoxy sheet plastination, many anatomical papers have recent observations of and/or clarification of anatomical concepts in different areas of medical expertice.