Eddy Current Testing of Artificial Defects in 316L Stainless Steel Samples Made by Additive Manufacturing Technology.

Additive manufacturing has many positives, but its incorporation into functional parts production is restricted by the presence of defects. Eddy current testing provides solutions for their identification; however, some methodology and measurement standards for AM (additive manufacturing) products are still missing. The main purpose of the experiment described within this article was to check the ability of eddy current testing to identify AM stainless steel parts and to examine the data obtained by eddy currents variation under the influence of various types of designed artificial defects. Experimental samples were designed and prepared with SLM (selective laser melting) technology. Artificial defects, included in the samples, were detected using the eddy current testing device, taking the important circumstances of this non-destructive method into account. The presented research shows significant potential for eddy current testing to identify defects in AM products, with a resolution of various types and sizes of defects. The obtained data output shows the importance of choosing the right measurement regime, excitation frequency and secondary parameters setup. Besides the eddy current testing conditions, defect properties also play a significant role, such as their shape, size, if they are filled with unmolten powder or if they reach the surface.