Matus Gelatko (Matúš Geľatko, Matúš Gel'atko)

Publication Activity (10 Years)

Years Active: 2022-2024
Publications (10 Years): 11

Top Topics

Simultaneous Determination

Optical Coherence Tomography

Top Venues

Materials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Matus Gelatko, Michal Hatala, František Botko, Radoslav Vandzura, Jiří Hajnyš
Study of Eddy Current Testing Ability on SLM Aluminium Alloy. Materials (Basel, Switzerland) 17 (14) (2024)
Radoslav Vandzura, Vladimír Simkulet, František Botko, Matus Gelatko, Michal Hatala
Influence of AWJ Process Parameters on Erosion Groove Formation in Additively Manufactured Stainless Steel. Materials (Basel, Switzerland) 17 (12) (2024)
Matus Gelatko, Michal Hatala, František Botko, Radoslav Vandzura, Jiří Hajnyš
Study of Eddy Current Testing Ability on SLM Aluminium Alloy. Materials (Basel, Switzerland) 17 (14) (2024)
Matus Gelatko, Michal Hatala, František Botko, Radoslav Vandzura
Residual Stress Evaluation in L-PBF-Produced SS 316L Specimens. Materials (Basel, Switzerland) 17 (10) (2024)
Matus Gelatko, Michal Hatala, František Botko, Radoslav Vandzura
Residual Stress Evaluation in L-PBF-Produced SS 316L Specimens. Materials (Basel, Switzerland) 17 (10) (2024)
Matus Gelatko, Michal Hatala, František Botko, Radoslav Vandzura, Jiří Hajnyš
Study of Eddy Current Testing Ability on SLM Aluminium Alloy. Materials (Basel, Switzerland) 17 (14) (2024)
Radoslav Vandzura, Vladimír Simkulet, František Botko, Matus Gelatko, Michal Hatala
Influence of AWJ Process Parameters on Erosion Groove Formation in Additively Manufactured Stainless Steel. Materials (Basel, Switzerland) 17 (12) (2024)
Matus Gelatko, Michal Hatala, František Botko, Radoslav Vandzura, Jiří Hajnyš, Michal Šajgalík, Jozef Török
Stress Relieving Heat Treatment of 316L Stainless Steel Made by Additive Manufacturing Process. Materials (Basel, Switzerland) 16 (19) (2023)
František Botko, Dominika Botkova, Matus Gelatko, Radoslav Vandzura, Dagmar Klichova
Evaluation of the Depth and Width of Cuts after Controlled-Depth Abrasive Water Jet Machining Using Low Pressure. Materials (Basel, Switzerland) 16 (24) (2023)
František Botko, Dominika Botkova, Matus Gelatko, Radoslav Vandzura, Dagmar Klichova
Evaluation of the Depth and Width of Cuts after Controlled-Depth Abrasive Water Jet Machining Using Low Pressure. Materials (Basel, Switzerland) 16 (24) (2023)
Matus Gelatko, Michal Hatala, František Botko, Radoslav Vandzura, Jiří Hajnyš
Eddy Current Testing of Artificial Defects in 316L Stainless Steel Samples Made by Additive Manufacturing Technology. Materials (Basel, Switzerland) 15 (19) (2022)