Exploring the Impact of Bio-Based Plasticizers on the Curing Behavior and Material Properties of a Simplified Tire-Tread Compound.

The tire industry needs to become more sustainable to reduce pollution and fight climate change. Replacing fossil ingredients in a tire-tread compound with bio-based alternatives is an approach to create a more sustainable product. For instance, the plasticizer can be replaced, which is a petroleum-based ingredient used in relatively high amounts in the rubber. This approach was followed in the current study. Three plant-based plasticizers were selected as potential substitutes for treated distillate aromatic extract (TDAE) in a simplified tire-tread compound formulation, namely, sunflower oil, coconut oil, and cardanol. Additionally, squalane was used as a TDAE replacement to further investigate the possible interactions between plasticizers and other compound ingredients. Squalane (C 30 H 62 ) is a fully saturated substance, containing six methyl groups but no additional chemical functional groups. Therefore, it was expected that squalane would result in limited interactions within the studied system. All alternatives to TDAE showed an increased cure rate and decreased scorch time, except squalane. This indicates that the three bio-based plasticizers might interact with the vulcanization system. For example, they could function as an additional coactivator of the curing system and/or shield the silica surface. A severe decrease in maximum torque and an increase in elongation at break were obtained for cardanol and sunflower oil. Both plasticizers also resulted in lower crosslink densities compared to the other compounds. A model study with the bio-plasticizers and sulfur verified that the unsaturation in the cardanol and sunflower oil reacted with the crosslinking agent. This leads to less sulfur available for the curing reaction, explaining the low maximum torque. The tan δ curves showed that all replacements resulted in a decrease in the glass transition temperature of the compound. Although all oil alternatives displayed promising results, none of them are suitable as a direct substitute for TDAE in a tire-tread compound due to its ability to interact additionally with other rubber ingredients and contribute in this form to the reinforcement of the compound.