Cell-Based Meat Scaffold Based on a 3D-Printed Starch-Based Gel.

Starch was mixed with a gel to produce a starch-based gel ink, which exhibited favorable printing characteristics. Through the optimization of infill density, 3D-printed scaffolds with 50% infill density and a highly ordered microstructure were successfully fabricated. The addition of calcium carbonate nanoparticles-glucono delta lactone (CaCO 3 NPs-GDL) had notable effects on the swelling degree, in vitro digestion, water stability, and pore distribution of the scaffolds. When the amount of CaCO 3 NPs in the starch-based gel was 0.075 g, the resulting 3D-printed gel scaffold with a 50% infill density proved to be the most suitable for cultivating cell-based meat. It featured pore sizes ranging from 80 to 120 μm and a compression modulus of 246.76 Pa. After 7 days of proliferation, the C2C12 mouse skeletal myoblasts exhibited an approximately 2.81-fold increase in cell numbers. The fusion index and maturation index of C2C12 cells on the scaffolds were 57.00 ± 0.45% and 34.56 ± 0.56%, respectively. The starch-based gel scaffolds demonstrated excellent water stability and in vitro degradability. Moreover, C2C12 cells exhibited successful proliferation and differentiation on the starch-based scaffolds, ultimately leading to the production of cell-based meat. This study developed a starch-based composite gel scaffold for the manufacture of cell-based meat.