Combining Organic Plastic Salts with a Bicontinuous Electrospun PVDF-HFP/Li 7 La 3 Zr 2 O 12 Membrane: LiF-Rich Solid-Electrolyte Interphase Enabling Stable Solid-State Lithium Metal Batteries.

Solid-state electrolytes can guarantee the safe operation of high-energy density lithium metal batteries (LMBs). However, major challenges still persist with LMBs due to the use of solid electrolytes, that is, poor ionic conductivity and poor compatibility at the electrolyte/electrode interface, which reduces the operational stability of solid-state LMBs. Herein, a novel fiber-network-reinforced composite polymer electrolyte (CPE) was designed by combining an organic plastic salt (OPS) with a bicontinuous electrospun polyvinylidene fluoride- co -hexafluoropropylene (PVDF-HFP)/Li 7 La 3 Zr 2 O 12 (LLZO) membrane. The presence of LLZO in the composite helps to promote the dissociation of FSI - from OPSs. Subsequently, the dissociated FSI - is then involved in the formation of a LiF-rich solid electrolyte interphase (SEI) layer on the lithium anode via a reductive decomposition reaction, which was affirmed by theoretical calculations and experimental results. Due to the LiF-rich SEI layer, the Li/Li symmetric cell was able to demonstrate a long cyclic life of over 2600 h at a current density of 0.1 mA cm -2 . More importantly, the as-prepared CPE achieved a high ionic conductivity of 2.8 × 10 -4 S cm -1 at 25 °C, and the Li/LiFePO 4 cell based on the CPE exhibited a high discharge capacity and 83.3% capacity retention after 500 cycles at 1.0 C. Thus, the strategy proposed in this work can inspire the future development of highly conductive solid electrolytes and compatible interface designs toward high-energy density solid-state LMBs.