Comparative Study of the Biological Degradation of Poly(3-Hydroxybutyrate-co-3-Hydroxyhexanoate) Microbeads in Municipal Wastewater in Environmental and Controlled Laboratory Conditions.
Evan M WhiteJessica HornShunli WangBenjamin CrawfordBranson W RitchieDaniel CarrawayJason LocklinPublished in: Environmental science & technology (2021)
From April to June 2019, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P3(HA)) microbead samples were exposed to an operational wastewater reclamation facility (WWRF) in an aerobic aeration basin in Athens, Georgia. Samples were withdrawn from the facility over a 13-week timeframe, and the particles were examined by Raman microscopy and thermogravimetric analysis/mass spectroscopy (TGA/MS) coupled with differential scanning calorimetry (DSC). The activated sludge from this facility was also used as an inoculum to examine carbon mineralization under controlled respirometry experiments to corroborate biological degradation rates determined from both the environmental and laboratory approach. Respirometry, Raman microscopy, and TGA/MS-DSC methods all measured similar biodegradation timelines for microbeads bound to an epoxy substrate, indicating that the three methods are temporally comparable and may be used to measure material biological degradation. Samples of epoxy-bound P3(HA) microbeads, free microbeads, the P3(HA) film, and poly(lactic acid) (PLA) film demonstrated carbon mineralization of 90.0, 89.4, 95.0, and 8.15%, respectively, relative to the cellulose positive control. Using a modified Gompertz growth model, the biological degradation rate coefficients (Rm) were determined for cellulose, P3(HA) film, epoxy-bound P3(HA) microbeads, and free P3(HA) microbeads and found to be 31.6, 30.2, 17.5, and 18.7 mL CO2·g-1·day-1, respectively. Moreover, P3(HA) microbeads can efficiently mineralize in WWRF infrastructure at a rate comparable to cellulose.