How Does Ethylenediaminetetraacetic Acid Irrigation Affect Biodentine? A Multimethod Ex Vivo Study.

The activity of biomaterials used during endodontic treatment can be affected by various factors. One of them is the chemical action of the irrigant that they are exposed to. The aim of this multimethod ex vivo study was to evaluate the influence of ethylenediaminetetraacetic acid (EDTA) on the surface appearance and chemical composition of Biodentine used in perforation repair. Twenty material specimens were prepared according to manufacturers' recommendations and divided into two setting-time-based groups, tested after 45 min (group A) and 24 h (group B) of setting. Material was irrigated with 17% EDTA solution with or without simultaneous ultrasonic activation. The surface characteristics and the chemical composition analysis of the Biodentine specimens were performed with the aid of a scanning electron microscope (SEM) and an energy dispersive spectroscopy (EDS) method, respectively. The volumetric loss of material was measured by dedicated digital software in an optical microscope. Statistical analysis was performed. The EDS study confirmed that after the rinsing protocol, the percentage content of elements differed between the groups. The EDTA rinse, whether ultrasonically activated or not, visibly affected the surface appearance and chemical composition of Biodentine. The specimens' surface subjected to irrigation was more irregular under SEM than in a control group. The US activation of the liquid amplified its impact on the tested material. The average volume loss in group A after 5 min irrigation was 3.98 µm 3 for each µm 2 of the chosen area and it increased up to 7.74 µm 3 /μm 2 after the ultrasonic activation. In group B, indicated volume loss values were 6.30 and 11.70 µm 3 /μm 2 for 5 min irrigation without and with US activation, respectively. Using a 20 min irrigation time and ultrasonic activation increased it up to 32.71 µm 3 /µm 2 . Each rinsing protocol involving irrigation with ethylenediaminetetraacetic acid modified the surface features and the chemical composition of the evaluated hydraulic tricalcium silicate cement. Further research is needed to indicate the possible impact of the observed changes on its long-term clinical performance.