Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate- co -3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica.
Chiara MarcoaldiMaria Pardo-FiguerezCristina PrietoCarmen ArnalSergio Torres-GinerLuis CabedoJosé María LagarónPublished in: Nanomaterials (Basel, Switzerland) (2023)
In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate- co -3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO 2 ) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies.