Halide Perovskites and their Derivatives for Efficient, High-Resolution Direct Radiation Detection: Design Strategies and Applications.

The past decade has witnessed the rapid rise in performance of optoelectronic devices based on lead-halide perovskites (LHPs). The large mobility-lifetime products and defect tolerance of these materials, essential for optoelectronics, also make them well-suited for radiation detectors, especially given the heavy elements present, which is essential for strong X-ray and γ-ray attenuation. Over the past decade, LHP thick films, wafers and single crystals have given rise to direct radiation detectors that have outperformed incumbent technologies in terms of sensitivity (reported values up to 3.5×10 6 μC Gy air -1 cm -2 ), limit of detection (directly measured values down to 1.5 nGy air s -1 ), along with competitive energy and imaging resolution at room temperature. At the same time, lead-free perovskite-inspired materials (e.g., methylammonium bismuth iodide), which have underperformed in solar cells, have recently matched and, in some areas (e.g., in polarization stability), surpassed the performance of LHP detectors. These advances open up opportunities to achieve devices for safer medical imaging, as well as more effective non-invasive analysis for security, nuclear safety or product inspection. Herein, we discuss the principles behind the rapid rises in performance of LHP and perovskite-inspired material detectors, and how their properties and performance link with critical applications in non-invasive diagnostics. We discuss the key strategies to engineer the performance of these materials, and the important challenges to overcome to commercialize these new technologies. This article is protected by copyright. All rights reserved.