Pressure-Relieving Effect of Different Insole Top Covers in People with Diabetes at High Risk of Foot Ulceration.

Pressure-relieving footwear helps prevent foot ulcers in people with diabetes. The footwear design contributes to this effect and includes the insole top cover. We aimed to assess the offloading effect of materials commonly used as insole top cover. We measured 20 participants with diabetes and peripheral neuropathy for in-shoe peak pressures while walking in their prescribed footwear with the insole covered with eight different materials, tested in randomized order. Top covers were a 3 mm or 6 mm thick open or closed-cell foam or a 6 mm thick combination of open- and closed-cell foams. We re-assessed pressures after one month of using the top cover. Peak pressures were assessed per anatomical foot region and a region of interest (i.e., previous ulceration or high barefoot pressure). Walking comfort was assessed using a 10-point Likert scale. Mean peak pressure at the region of interest varied between 167 (SD:56) and 186 (SD:65) kPa across top covers ( p < 0.001) and was significantly higher for the 3 mm thick PPT than for four of the seven 6 mm thick top covers. Across 6 mm thick top covers, only two showed a significant peak pressure difference between them. Over time, peak pressures changed non-significantly from -2.7 to +47.8 kPa across top cover conditions. Comfort ratings were 8.0 to 8.4 across top covers ( p = 0.863). The 6 mm thick foams provided more pressure relief than the 3 mm thick foam during walking in high-risk people with diabetes. Between the 6 mm thick foams and over time, only small differences exist. The choice of which 6 mm thick insole top cover to use may be determined more by availability, durability, ease of use, costs, or hygienic properties than by superiority in pressure-relief capacity.