Login / Signup

Fabrication of an Organofunctionalized Talc-like Magnesium Phyllosilicate for the Electrochemical Sensing of Lead Ions in Water Samples.

Chancellin Nkepdep PecheuSherman Lesly Zambou JiokengArnaud Kamdem TamoGiscard DoungmoIngo DoenchAnayancy Osorio-MadrazoIgnas Kenfack TonleEmmanuel Ngameni
Published in: Nanomaterials (Basel, Switzerland) (2022)
A talc-like magnesium phyllosilicate functionalized with amine groups (TalcNH 2 ), useful as sensor material in voltammetry stripping analysis, was synthesized by a sol-gel-based processing method. The characterizations of the resulting synthetic organoclay by scanning electron microscopy (SEM), X-ray diffraction, N 2 sorption isotherms (BET method), Fourier transform infrared spectroscopy (FTIR), CHN elemental analysis and UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS) demonstrated the effectiveness of the process used for grafting of amine functionality in the interlamellar clay. The results indicate the presence of organic moieties covalently bonded to the inorganic lattice of talc-like magnesium phyllosilicate silicon sheet, with interlayer distances of 1568.4 pm. In an effort to use a talc-like material as an electrode material without the addition of a dispersing agent and/or molecular glue, the TalcNH 2 material was successfully dispersed in distilled water in contrast to natural talc. Then, it was used to modify a glassy carbon electrode (GCE) by drop coating. The characterization of the resulting modified electrode by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) revealed its charge selectivity ability. In addition, EIS results showed low charge transfer resistance (0.32 Ω) during the electro-oxidation of [Fe(CN) 6 ] 3- . Kinetics studies were also performed by EIS, which revealed that the standard heterogeneous electron transfer rate constant was (0.019 ± 0.001) cm.s -1 , indicating a fast direct electron transfer rate of [Fe(CN) 6 ] 3- to the electrode. Using anodic adsorptive stripping differential pulse voltammetry (DPV), fast and highly sensitive determination of Pb(II) ions was achieved. The peak current of Pb 2+ ions on TalcNH 2 /GCE was about three-fold more important than that obtained on bare GCE. The calculated detection and quantification limits were respectively 7.45 × 10 -8 M (S/N = 3) and 24.84 × 10 -8 M (S/N 10), for the determination of Pb 2+ under optimized conditions. The method was successfully used to tap water with satisfactory results. The results highlight the efficient chelation of Pb 2+ ions by the grafted NH 2 groups and the potential of talc-like amino-functionalized magnesium phyllosilicate for application in electrochemical sensors.
Keyphrases