Influence of AWJ Process Parameters on Erosion Groove Formation in Additively Manufactured Stainless Steel.

The presented manuscript focuses on the influence of process parameters of abrasive water jet technology on the creation of non-transient erosive grooves. The processed stainless steel SS 316L is additively manufactured using the selective laser melting (SLM) method. Due to the distinct mechanical properties of this material resulting from the production process, the material was machined in two planes according to the direction of the printing layers. The experimental part employed a planned experiment utilizing the DoE (Design of Experiment) method. Experiments aimed at varying process parameters (traverse speed, standoff distance, abrasive mass flow) were conducted at a water pressure of 50 MPa, assessing the parameters' impact on the removed material and the properties of the resulting non-transient erosion groove. The properties of the erosion groove, such as shape and the material removal (area of erosion groove), were evaluated. The influences of process parameters on the observed parameters were assessed using the analysis of variance (ANOVA) method. Experiment preparation and setup were based on a thorough theoretical analysis of the machining process with the abrasive water jet (AWJ) method. The experiment also highlights the diverse properties of the SS 316L material prepared using the SLM method when machined with AWJ technology.