Materials and structures

Keyphrases

Publications

volume 57, number 4, 2024

Ueli M Angst, Emanuele Rossi, Carolina Boschmann Käthler, David Mannes, Pavel Trtik, Bernhard Elsener, Zhou Zhou, Markus Strobl
Chloride-induced corrosion of steel in concrete-insights from bimodal neutron and X-ray microtomography combined with ex-situ microscopy. Materials and structures 57 (4) (2024)
Ueli M Angst, Emanuele Rossi, Carolina Boschmann Käthler, David Mannes, Pavel Trtik, Bernhard Elsener, Zhou Zhou, Markus Strobl
Chloride-induced corrosion of steel in concrete-insights from bimodal neutron and X-ray microtomography combined with ex-situ microscopy. Materials and structures 57 (4) (2024)
Ueli M Angst, Emanuele Rossi, Carolina Boschmann Käthler, David Mannes, Pavel Trtik, Bernhard Elsener, Zhou Zhou, Markus Strobl
Chloride-induced corrosion of steel in concrete-insights from bimodal neutron and X-ray microtomography combined with ex-situ microscopy. Materials and structures 57 (4) (2024)
Ueli M Angst, Emanuele Rossi, Carolina Boschmann Käthler, David Mannes, Pavel Trtik, Bernhard Elsener, Zhou Zhou, Markus Strobl
Chloride-induced corrosion of steel in concrete-insights from bimodal neutron and X-ray microtomography combined with ex-situ microscopy. Materials and structures 57 (4) (2024)

volume 57, number 7, 2024

volume 56, number 1, 2023

Markus Königsberger, Markus Lukacevic, Josef Füssl
Multiscale micromechanics modeling of plant fibers: upscaling of stiffness and elastic limits from cellulose nanofibrils to technical fibers. Materials and structures 56 (1) (2023)
Markus Königsberger, Markus Lukacevic, Josef Füssl
Multiscale micromechanics modeling of plant fibers: upscaling of stiffness and elastic limits from cellulose nanofibrils to technical fibers. Materials and structures 56 (1) (2023)

volume 56, number 2, 2023

Erich Wieland, George Dan Miron, Bin Ma, Guoqing Geng, Barbara Lothenbach
Speciation of iron(II/III) at the iron-cement interface: a review. Materials and structures 56 (2) (2023)
Erich Wieland, George Dan Miron, Bin Ma, Guoqing Geng, Barbara Lothenbach
Speciation of iron(II/III) at the iron-cement interface: a review. Materials and structures 56 (2) (2023)

volume 56, number 3, 2023

Paula Bran-Anleu, Timothy Wangler, Venkatesh N Nerella, Viktor Mechtcherine, Pavel Trtik, Robert J Flatt
Using micro-XRF to characterize chloride ingress through cold joints in 3D printed concrete. Materials and structures 56 (3) (2023)
Paula Bran-Anleu, Timothy Wangler, Venkatesh N Nerella, Viktor Mechtcherine, Pavel Trtik, Robert J Flatt
Using micro-XRF to characterize chloride ingress through cold joints in 3D printed concrete. Materials and structures 56 (3) (2023)

volume 56, number 5, 2023

Elke Ziehensack, Sylvia Keßler, Ueli M Angst, Harald Hilbig, Christoph Gehlen
Diffusion potentials in saturated hardened cement paste upon chloride exposure. Materials and structures 56 (5) (2023)

volume 56, number 1, 2022

Kiran Ram, Marijana Serdar, Diana Londono-Zuluaga, Karen Scrivener
Does carbon footprint reduction impair mechanical properties and service life of concrete? Materials and structures 56 (1) (2022)
Kiran Ram, Marijana Serdar, Diana Londono-Zuluaga, Karen Scrivener
Does carbon footprint reduction impair mechanical properties and service life of concrete? Materials and structures 56 (1) (2022)

volume 55, number 10, 2022

Sonya Barzgar, Yiru Yan, Mohamed Tarik, Jorgen Skibsted, Christian Ludwig, Barbara Lothenbach
A long-term study on structural changes in calcium aluminate silicate hydrates. Materials and structures 55 (10) (2022)

volume 55, number 2, 2022

Nadja Oneschkow, Tim Scheiden
Influence of the composition of high-strength concrete and mortar on the compressive fatigue behaviour. Materials and structures 55 (2) (2022)

volume 55, number 3, 2022

Hanne Vanoutrive, Philip Van den Heede, Natalia Mariel Alderete, Carmen Andrade, Tushar Bansal, Aires Camões, Özlem Cizer, Nele De Belie, Vilma Ducman, Miren Etxeberria, Lander Frederickx, Cyrill Grengg, Ivan Ignjatović, Tung-Chai Ling, Zhiyuan Liu, Ines Garcia-Lodeiro, Barbara Lothenbach, César Medina Martinez, Javier Sánchez Montero, Kolawole Olonade, Ángel Palomo, Quoc Tri Phung, Nuria Rebolledo, Marlene Sakoparnig, Kosmas Sideris, Charlotte Thiel, Talakokula Visalakshi, Anya Vollpracht, Stefanie von Greve-Dierfeld, Jinxin Wei, Bei Wu, Maciej Zając, Zengfeng Zhao, Elke Gruyaert
Report of RILEM TC 281-CCC: outcomes of a round robin on the resistance to accelerated carbonation of Portland, Portland-fly ash and blast-furnace blended cements. Materials and structures 55 (3) (2022)
Xiangping Xian, Chad Logan, Yixin Shao
Dimensional stability of cement paste and concrete subject to early-age carbonation curing. Materials and structures 55 (3) (2022)
Xiangping Xian, Chad Logan, Yixin Shao
Dimensional stability of cement paste and concrete subject to early-age carbonation curing. Materials and structures 55 (3) (2022)

volume 55, number 6, 2022

Nima Hosseinzadeh, Luca Montanari, Prannoy Suraneni
Durability of concretes exposed to high concentrations of CaCl 2 and MgCl 2 . Materials and structures 55 (6) (2022)

volume 55, number 7, 2022

Mahsa Bagheri, Barbara Lothenbach, Karen Scrivener
The effect of paste composition, aggregate mineralogy and temperature on the pore solution composition and the extent of ASR expansion. Materials and structures 55 (7) (2022)

volume 55, number 8, 2022

George Dan Miron, Dmitrii A Kulik, Barbara Lothenbach
Porewater compositions of Portland cement with and without silica fume calculated using the fine-tuned CASH+NK solid solution model. Materials and structures 55 (8) (2022)
Federica Boscaro, Robert Johann Flatt
A method for the mix design of low carbon concrete towards industrial production. Materials and structures 55 (8) (2022)

volume 54, number 3, 2021

A Hajiesmaeili, M A Hafiz, E Denarié
Tensile response of Ultra High Performance PE Fiber Reinforced Concretes (PE-UHPFRC) under imposed shrinkage deformations. Materials and structures 54 (3) (2021)

volume 54, number 5, 2021

M Bueno, R Haag, N Heeb, P Mikhailenko, L Boesiger, Poulikakos L D
Functional and environmental performance of plant-produced crumb rubber asphalt mixtures using the dry process. Materials and structures 54 (5) (2021)
John L Provis, Sarah A Kearney
Editorial-Materials & Structures. Materials and structures 54 (5) (2021)

volume 54, number 6, 2021

Minu Lee, Jaime Mata-Falcón, Walter Kaufmann
Load-deformation behaviour of weft-knitted textile reinforced concrete in uniaxial tension. Materials and structures 54 (6) (2021)

volume 53, number 2, 2020

Bastian Valentin Wilding, Michele Godio, Katrin Beyer
The ratio of shear to elastic modulus of in-plane loaded masonry. Materials and structures 53 (2) (2020)

volume 51, number 3, 2018

L Pel, R Pishkari, M Casti
A simplified model for the combined wicking and evaporation of a NaCl solution in limestone. Materials and structures 51 (3) (2018)

volume 51, number 4, 2018

D M Herbert, D R Gardner, M Harbottle, T G Hughes
Performance of single skin masonry walls subjected to hydraulic loading. Materials and structures 51 (4) (2018)

volume 51, number 5, 2018

Geert De Schutter, Karel Lesage
Active control of properties of concrete: a (p)review. Materials and structures 51 (5) (2018)

volume 51, number 6, 2018

Hayder M Oleiwi, Yu Wang, Michele Curioni, Xianyi Chen, Guowen Yao, Levingshan Augusthus-Nelson, A H Ragazzon-Smith, Igor Shabalin
An experimental study of cathodic protection for chloride contaminated reinforced concrete. Materials and structures 51 (6) (2018)
Klaas van Breugel
How models can make a difference for a sustainable future of the building industry. Materials and structures 51 (6) (2018)

volume 50, number 3, 2017

Dale P Bentz, Paul E Stutzman, Franco Zunino
Low-Temperature Curing Strength Enhancement in Cement-Based Materials Containing Limestone Powder. Materials and structures 50 (3) (2017)

volume 50, number 6, 2017

Zhijun Tan, Susan A Bernal, John L Provis
Reproducible mini-slump test procedure for measuring the yield stress of cementitious pastes. Materials and structures 50 (6) (2017)
Xinyuan Ke, Susan A Bernal, Oday H Hussein, John L Provis
Chloride binding and mobility in sodium carbonate-activated slag pastes and mortars. Materials and structures 50 (6) (2017)
Thomas Schlappal, Michael Schweigler, Susanne Gmainer, Martin Peyerl, Bernhard Pichler
Creep and cracking of concrete hinges: insight from centric and eccentric compression experiments. Materials and structures 50 (6) (2017)

volume 50, number 2, 2016

Joseph Williams, Mike Lawrence, Pete Walker
The influence of the casting process on the internal structure and physical properties of hemp-lime. Materials and structures 50 (2) (2016)

volume 50, 2016

Hadi S Esmaeeli, Yaghoob Farnam, Dale P Bentz, Pablo D Zavattieri, Jason Weiss
Numerical Simulation of the Freeze-Thaw Behavior of Mortar Containing Deicing Salt Solution. Materials and structures 50 (2016)

volume 45, number 4, 2011

Miloš Drdácký, Jaroslav Lesák, Silvia Rescic, Zuzana Slížková, Piero Tiano, Jaroslav Valach
Standardization of peeling tests for assessing the cohesion and consolidation characteristics of historic stone surfaces. Materials and structures 45 (4) (2011)