Claudio Tosto

ResearcherID ORCID

Publication Activity (10 Years)

Years Active: 2018-2024
Publications (10 Years): 15

Top Venues

Polymers

Materials (Basel, Switzerland)

Entropy (Basel, Switzerland)

Università degli Studi di Catania

Università degli Studi di Catania (PHD)

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Università degli Studi di Catania Nov 01 2018

Italy

PhD Student :: Dipartimento di Ingegneria Civile e Architettura

Università degli Studi di Catania Mar 13 2017 - Jul 13 2017

Italy

Tirocinante presso Laboratorio di Materiali polimerici e compositi :: Dipartimento di Ingegneria Civile e Architettura

Education History

Università degli Studi di Catania Nov 02 2018

Italy

PHD :: Dipartimento di Ingegneria Civile e Architettura

Publications

Claudio Tosto, Lorena Saitta, Alberta Latteri, Gianluca Cicala
Epoxy-Based Blend Formulation for Dual Curing in Liquid Crystal Display 3D Printing: A Study on Thermomechanical Properties Variation for Enhanced Printability. Polymers 16 (3) (2024)
Claudio Tosto, Lorena Saitta, Alberta Latteri, Gianluca Cicala
Epoxy-Based Blend Formulation for Dual Curing in Liquid Crystal Display 3D Printing: A Study on Thermomechanical Properties Variation for Enhanced Printability. Polymers 16 (3) (2024)
Lorena Saitta, Giuliana Rizzo, Claudio Tosto, Gianluca Cicala, Ignazio Blanco, Eugenio Pergolizzi, Romeo Ciobanu, Giuseppe Recca
Chemical Recycling of Fully Recyclable Bio-Epoxy Matrices and Reuse Strategies: A Cradle-to-Cradle Approach. Polymers 15 (13) (2023)
Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Giovanna Stella, Gianluca Cicala, And Maide Bucolo
A Regression Approach to Model Refractive Index Measurements of Novel 3D Printable Photocurable Resins for Micro-Optofluidic Applications. Polymers 15 (12) (2023)
Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Dario Sanalitro, Francesca M Guarino, Gianluca Cicala, And Maide Bucolo
Projection Micro-Stereolithography to Manufacture a Biocompatible Micro-Optofluidic Device for Cell Concentration Monitoring. Polymers 15 (22) (2023)
Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Giovanna Stella, Gianluca Cicala, And Maide Bucolo
A Regression Approach to Model Refractive Index Measurements of Novel 3D Printable Photocurable Resins for Micro-Optofluidic Applications. Polymers 15 (12) (2023)
Claudio Tosto, Mario Bragaglia, Francesca Nanni, Giuseppe Recca, Gianluca Cicala
Fused Filament Fabrication of Alumina/Polymer Filaments for Obtaining Ceramic Parts after Debinding and Sintering Processes. Materials (Basel, Switzerland) 15 (20) (2022)
Giovanna Stella, Matteo Barcellona, Lorena Saitta, Claudio Tosto, Gianluca Cicala, Antonino Gulino, And Maide Bucolo, Maria Elena Fragalá
3D Printing Manufacturing of Polydimethyl-Siloxane/Zinc Oxide Micro-Optofluidic Device for Two-Phase Flows Control. Polymers 14 (10) (2022)
Claudio Tosto, Jacopo Tirillò, Fabrizio Sarasini, Claudia Sergi, Gianluca Cicala
Fused Deposition Modeling Parameter Optimization for Cost-Effective Metal Part Printing. Polymers 14 (16) (2022)
Ignazio Blanco, Gianluca Cicala, Giuseppe Recca, Claudio Tosto
Specific Heat Capacity and Thermal Conductivity Measurements of PLA-Based 3D-Printed Parts with Milled Carbon Fiber Reinforcement. Entropy (Basel, Switzerland) 24 (5) (2022)
Nunzio Cennamo, Lorena Saitta, Claudio Tosto, Francesco Arcadio, Luigi Zeni, Maria Elena Fragalá, Gianluca Cicala
Microstructured Surface Plasmon Resonance Sensor Based on Inkjet 3D Printing Using Photocurable Resins with Tailored Refractive Index. Polymers 13 (15) (2021)
Antonella Patti, Domenico Acierno, Alberta Latteri, Claudio Tosto, Eugenio Pergolizzi, Giuseppe Recca, Mirko Cristaudo, Gianluca Cicala
Influence of the Processing Conditions on the Mechanical Performance of Sustainable Bio-Based PLA Compounds. Polymers 12 (10) (2020)
Claudio Tosto, Eugenio Pergolizzi, Ignazio Blanco, Antonella Patti, Paul Holt, Sarah Karmel, Gianluca Cicala
Epoxy Based Blends for Additive Manufacturing by Liquid Crystal Display (LCD) Printing: The Effect of Blending and Dual Curing on Daylight Curable Resins. Polymers 12 (7) (2020)
Ignazio Blanco, Gianluca Cicala, Claudio Tosto, Francesco Agatino Bottino
Kinetic Study of the Thermal and Thermo-Oxidative Degradations of Polystyrene Reinforced with Multiple-Cages POSS. Polymers 12 (11) (2020)
Gianluca Cicala, Davide Giordano, Claudio Tosto, Giovanni Filippone, Antonino Recca, Ignazio Blanco
Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality. Materials (Basel, Switzerland) 11 (7) (2018)

Claudio Tosto.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Claudio Tosto