Gianluca Cicala

Publication Activity (10 Years)

Years Active: 2017-2024
Publications (10 Years): 29

Top Topics

Tissue Engineering

Reduced Graphene Oxide

High Temperature

Top Venues

Materials (Basel, Switzerland)

Molecules (Basel, Switzerland)

Entropy (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Claudio Tosto, Lorena Saitta, Alberta Latteri, Gianluca Cicala
Epoxy-Based Blend Formulation for Dual Curing in Liquid Crystal Display 3D Printing: A Study on Thermomechanical Properties Variation for Enhanced Printability. Polymers 16 (3) (2024)
Claudio Tosto, Lorena Saitta, Alberta Latteri, Gianluca Cicala
Epoxy-Based Blend Formulation for Dual Curing in Liquid Crystal Display 3D Printing: A Study on Thermomechanical Properties Variation for Enhanced Printability. Polymers 16 (3) (2024)
Lorena Saitta, Giuliana Rizzo, Claudio Tosto, Gianluca Cicala, Ignazio Blanco, Eugenio Pergolizzi, Romeo Ciobanu, Giuseppe Recca
Chemical Recycling of Fully Recyclable Bio-Epoxy Matrices and Reuse Strategies: A Cradle-to-Cradle Approach. Polymers 15 (13) (2023)
Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Giovanna Stella, Gianluca Cicala, And Maide Bucolo
A Regression Approach to Model Refractive Index Measurements of Novel 3D Printable Photocurable Resins for Micro-Optofluidic Applications. Polymers 15 (12) (2023)
Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Dario Sanalitro, Francesca M Guarino, Gianluca Cicala, And Maide Bucolo
Projection Micro-Stereolithography to Manufacture a Biocompatible Micro-Optofluidic Device for Cell Concentration Monitoring. Polymers 15 (22) (2023)
Lorena Saitta, Emanuela Cutuli, Giovanni Celano, Claudio Tosto, Giovanna Stella, Gianluca Cicala, And Maide Bucolo
A Regression Approach to Model Refractive Index Measurements of Novel 3D Printable Photocurable Resins for Micro-Optofluidic Applications. Polymers 15 (12) (2023)
Sandro Dattilo, Gianluca Cicala, Paolo Maria Riccobene, Concetto Puglisi, Lorena Saitta
Full Recycling and Re-Use of Bio-Based Epoxy Thermosets: Chemical and Thermomechanical Characterization of the Recycled Matrices. Polymers 14 (22) (2022)
Claudio Tosto, Mario Bragaglia, Francesca Nanni, Giuseppe Recca, Gianluca Cicala
Fused Filament Fabrication of Alumina/Polymer Filaments for Obtaining Ceramic Parts after Debinding and Sintering Processes. Materials (Basel, Switzerland) 15 (20) (2022)
Giovanna Stella, Matteo Barcellona, Lorena Saitta, Claudio Tosto, Gianluca Cicala, Antonino Gulino, And Maide Bucolo, Maria Elena Fragalá
3D Printing Manufacturing of Polydimethyl-Siloxane/Zinc Oxide Micro-Optofluidic Device for Two-Phase Flows Control. Polymers 14 (10) (2022)
Ignazio Blanco, Alberta Latteri, Gianluca Cicala, Antonio D'Angelo, Veronica Viola, Vincenzo Arconati, Michelina Catauro
Antibacterial and Chemical Characterization of Silica-Quercetin-PEG Hybrid Materials Synthesized by Sol-Gel Route. Molecules (Basel, Switzerland) 27 (3) (2022)
Claudio Tosto, Jacopo Tirillò, Fabrizio Sarasini, Claudia Sergi, Gianluca Cicala
Fused Deposition Modeling Parameter Optimization for Cost-Effective Metal Part Printing. Polymers 14 (16) (2022)
Ignazio Blanco, Gianluca Cicala, Giuseppe Recca, Claudio Tosto
Specific Heat Capacity and Thermal Conductivity Measurements of PLA-Based 3D-Printed Parts with Milled Carbon Fiber Reinforcement. Entropy (Basel, Switzerland) 24 (5) (2022)
Antonella Patti, Stefano Acierno, Gianluca Cicala, Mauro Zarrelli, Domenico Acierno
Recovery of Waste Material from Biobags: 3D Printing Process and Thermo-Mechanical Characteristics in Comparison to Virgin and Composite Matrices. Polymers 14 (10) (2022)
Antonella Patti, Gianluca Cicala, Stefano Acierno
Rotational Rheology of Wood Flour Composites Based on Recycled Polyethylene. Polymers 13 (14) (2021)
Francesca Ferrari, Carola Esposito Corcione, Raffaella Striani, Lorena Saitta, Gianluca Cicala, Antonio Greco
Fully Recyclable Bio-Based Epoxy Formulations Using Epoxidized Precursors from Waste Flour: Thermal and Mechanical Characterization. Polymers 13 (16) (2021)
Nunzio Cennamo, Lorena Saitta, Claudio Tosto, Francesco Arcadio, Luigi Zeni, Maria Elena Fragalá, Gianluca Cicala
Microstructured Surface Plasmon Resonance Sensor Based on Inkjet 3D Printing Using Photocurable Resins with Tailored Refractive Index. Polymers 13 (15) (2021)
Andrea Antonino Scamporrino, Concetto Puglisi, Angela Spina, Maurizio Montaudo, Daniela Clotilde Zampino, Gianluca Cicala, Giulia Ognibene, Chiara Di Mauro, Sandro Dattilo, Emanuele F Mirabella, Giuseppe Recca, Filippo Samperi
Synthesis and Characterization of Copoly(Ether Sulfone)s with Different Percentages of Diphenolic Acid Units. Polymers 12 (8) (2020)
Mario Salmeri, Giulia Ognibene, Lorena Saitta, Cinzia Lombardo, Carlo Genovese, Matteo Barcellona, Alessandro D'Urso, Luca Spitaleri, Ignazio Blanco, Gianluca Cicala, Antonino Gulino, Maria Elena Fragalá
Optimization of ZnO Nanorods Growth on Polyetheresulfone Electrospun Mats to Promote Antibacterial Properties. Molecules (Basel, Switzerland) 25 (7) (2020)
Antonella Patti, Gianluca Cicala, Domenico Acierno
Eco-Sustainability of the Textile Production: Waste Recovery and Current Recycling in the Composites World. Polymers 13 (1) (2020)
Sandro Dattilo, Concetto Puglisi, Emanuele Francesco Mirabella, Angela Spina, Andrea Antonino Scamporrino, Daniela Clotilde Zampino, Ignazio Blanco, Gianluca Cicala, Giulia Ognibene, Chiara Di Mauro, Filippo Samperi
Thermal Degradation Processes of Aromatic Poly(Ether Sulfone) Random Copolymers Bearing Pendant Carboxyl Groups. Polymers 12 (8) (2020)
Antonella Patti, Domenico Acierno, Alberta Latteri, Claudio Tosto, Eugenio Pergolizzi, Giuseppe Recca, Mirko Cristaudo, Gianluca Cicala
Influence of the Processing Conditions on the Mechanical Performance of Sustainable Bio-Based PLA Compounds. Polymers 12 (10) (2020)
Claudio Tosto, Eugenio Pergolizzi, Ignazio Blanco, Antonella Patti, Paul Holt, Sarah Karmel, Gianluca Cicala
Epoxy Based Blends for Additive Manufacturing by Liquid Crystal Display (LCD) Printing: The Effect of Blending and Dual Curing on Daylight Curable Resins. Polymers 12 (7) (2020)
Ignazio Blanco, Gianluca Cicala, Claudio Tosto, Francesco Agatino Bottino
Kinetic Study of the Thermal and Thermo-Oxidative Degradations of Polystyrene Reinforced with Multiple-Cages POSS. Polymers 12 (11) (2020)
Giulia Ognibene, Alberta Latteri, Salvatore Mannino, Lorena Saitta, Giuseppe Recca, Fabrizio Scarpa, Gianluca Cicala
Interlaminar Toughening of Epoxy Carbon Fiber Reinforced Laminates: Soluble Versus Non-Soluble Veils. Polymers 11 (6) (2019)
Gianluca Cicala, Davide Giordano, Claudio Tosto, Giovanni Filippone, Antonino Recca, Ignazio Blanco
Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality. Materials (Basel, Switzerland) 11 (7) (2018)
Angela Daniela La Rosa, Ignazio Blanco, Diosdado R Banatao, Stefan J Pastine, Anna Björklund, Gianluca Cicala
Innovative Chemical Process for Recycling Thermosets Cured with Recyclamines® by Converting Bio-Epoxy Composites in Reusable Thermoplastic-An LCA Study. Materials (Basel, Switzerland) 11 (3) (2018)
Gianluca Cicala, Giulia Ognibene, Salvatore Portuesi, Ignazio Blanco, Mario Rapisarda, Eugenio Pergolizzi, Giuseppe Recca
Comparison of Ultem 9085 Used in Fused Deposition Modelling (FDM) with Polytherimide Blends. Materials (Basel, Switzerland) 11 (2) (2018)
Giulia Ognibene, Salvatore Mannino, Maria Elena Fragalá, Gianluca Cicala
Trifunctional Epoxy Resin Composites Modified by Soluble Electrospun Veils: Effect on the Viscoelastic and Morphological Properties. Materials (Basel, Switzerland) 11 (3) (2018)
Gianluca Cicala, Ignazio Blanco, Alberta Latteri, Giulia Ognibene, Francesco Agatino Bottino, Maria Elena Fragalá
PES/POSS Soluble Veils as Advanced Modifiers for Multifunctional Fiber Reinforced Composites. Polymers 9 (7) (2017)