Jakub Łuszczek

Publication Activity (10 Years)

Years Active: 2021-2024
Publications (10 Years): 27

Top Topics

High Temperature

Aortic Valve Replacement

Top Venues

Materials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Janusz Kluczyński, Bartłomiej Sarzyński, Tomáš Dražan, Jakub Łuszczek, Robert Kosturek, Ireneusz Szachogłuchowicz
Influence of Process Parameters on Selected Properties of Ti6Al4V Manufacturing via L-PBF Process. Materials (Basel, Switzerland) 17 (17) (2024)
Katarzyna Jasik, Lucjan Sniezek, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz
17-4 PH Steel Parts Obtained through MEX and PBF-LB/M Technologies: Comparison of the Structural Properties. Materials (Basel, Switzerland) 17 (12) (2024)
Katarzyna Jasik, Lucjan Sniezek, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz
17-4 PH Steel Parts Obtained through MEX and PBF-LB/M Technologies: Comparison of the Structural Properties. Materials (Basel, Switzerland) 17 (12) (2024)
Katarzyna Jasik, Janusz Kluczyński, Danuta Miedzińska, Arkadiusz Popławski, Jakub Łuszczek, Justyna Zygmuntowicz, Paulina Piotrkiewicz, Krzysztof Perkowski, Marcin Wachowski, Krzysztof Grzelak
Comparison of Additively Manufactured Polymer-Ceramic Parts Obtained via Different Technologies. Materials (Basel, Switzerland) 17 (1) (2024)
Janusz Kluczyński, Tomáš Dražan, Zdeněk Joska, Jakub Łuszczek, Robert Kosturek, Katarzyna Jasik
Microstructural Investigation of Process Parameters Dedicated to Laser Powder Bed Fusion of AlSi7Mg0.6 Alloy. Materials (Basel, Switzerland) 17 (9) (2024)
Maciej Łakomy, Janusz Kluczyński, Bartłomiej Sarzyński, Katarzyna Jasik, Ireneusz Szachogłuchowicz, Jakub Łuszczek
Bending Strength of Continuous Fiber-Reinforced (CFR) Polyamide-Based Composite Additively Manufactured through Material Extrusion. Materials (Basel, Switzerland) 17 (12) (2024)
Marcin Małek, Janusz Kluczyński, Katarzyna Jasik, Emil Kardaszuk, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Krzysztof Grzelak, Ireneusz Ewiak
An Eco-Friendly and Innovative Approach in Building Engineering: The Production of Cement-Glass Composite Bricks with Recycled Polymeric Reinforcements. Materials (Basel, Switzerland) 17 (3) (2024)
Janusz Kluczyński, Tomáš Dražan, Zdeněk Joska, Jakub Łuszczek, Robert Kosturek, Katarzyna Jasik
Microstructural Investigation of Process Parameters Dedicated to Laser Powder Bed Fusion of AlSi7Mg0.6 Alloy. Materials (Basel, Switzerland) 17 (9) (2024)
Marcin Małek, Janusz Kluczyński, Katarzyna Jasik, Emil Kardaszuk, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Krzysztof Grzelak, Ireneusz Ewiak
An Eco-Friendly and Innovative Approach in Building Engineering: The Production of Cement-Glass Composite Bricks with Recycled Polymeric Reinforcements. Materials (Basel, Switzerland) 17 (3) (2024)
Maciej Łakomy, Janusz Kluczyński, Bartłomiej Sarzyński, Katarzyna Jasik, Ireneusz Szachogłuchowicz, Jakub Łuszczek
Bending Strength of Continuous Fiber-Reinforced (CFR) Polyamide-Based Composite Additively Manufactured through Material Extrusion. Materials (Basel, Switzerland) 17 (12) (2024)
Katarzyna Jasik, Janusz Kluczyński, Danuta Miedzińska, Arkadiusz Popławski, Jakub Łuszczek, Justyna Zygmuntowicz, Paulina Piotrkiewicz, Krzysztof Perkowski, Marcin Wachowski, Krzysztof Grzelak
Comparison of Additively Manufactured Polymer-Ceramic Parts Obtained via Different Technologies. Materials (Basel, Switzerland) 17 (1) (2024)
Janusz Kluczyński, Katarzyna Jasik, Jakub Łuszczek, Bartłomiej Sarzyński, Krzysztof Grzelak, Tomáš Dražan, Zdeněk Joska, Ireneusz Szachogłuchowicz, Paweł Płatek, Marcin Małek
A Comparative Investigation of Properties of Metallic Parts Additively Manufactured through MEX and PBF-LB/M Technologies. Materials (Basel, Switzerland) 16 (14) (2023)
Piotr Sawczuk, Janusz Kluczyński, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz, Katarzyna Jasik, Jakub Łuszczek, Krzysztof Grzelak, Paweł Płatek, Janusz Torzewski, Marcin Małek
Regeneration of the Damaged Parts with the Use of Metal Additive Manufacturing-Case Study. Materials (Basel, Switzerland) 16 (10) (2023)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Marcin Małek, Janusz Kluczyński, Waldemar Łasica, Mateusz Jackowski, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Krzysztof Grzelak
Performance Properties of Cement-Glass Composite Bricks (CGCB) with Additively Manufactured (AM) Polymeric Scaffolding. Materials (Basel, Switzerland) 16 (5) (2023)
Marcin Małek, Janusz Kluczyński, Waldemar Łasica, Mateusz Jackowski, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Krzysztof Grzelak
Performance Properties of Cement-Glass Composite Bricks (CGCB) with Additively Manufactured (AM) Polymeric Scaffolding. Materials (Basel, Switzerland) 16 (5) (2023)
Agnieszka Klimek, Janusz Kluczyński, Jakub Łuszczek
Performance Analysis of Additively Manufactured Hydraulic Check Valves with Different Postprocessing. Materials (Basel, Switzerland) 16 (23) (2023)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Michał Mazurkiewicz, Janusz Kluczyński, Katarzyna Jasik, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Lucjan Sniezek, Krzysztof Grzelak, Marcin Małek
Bending Strength of Polyamide-Based Composites Obtained during the Fused Filament Fabrication (FFF) Process. Materials (Basel, Switzerland) 15 (14) (2022)
Krzysztof Grzelak, Marcin Bielecki, Janusz Kluczyński, Ireneusz Szachogłuchowicz, Lucjan Sniezek, Janusz Torzewski, Jakub Łuszczek, Łukasz Słoboda, Marcin Wachowski, Zenon Komorek, Marcin Małek, Justyna Zygmuntowicz
A Comparative Study on Laser Powder Bed Fusion of Differently Atomized 316L Stainless Steel. Materials (Basel, Switzerland) 15 (14) (2022)
Agnieszka Klimek, Janusz Kluczyński, Jakub Łuszczek, Adam Bartnicki, Krzysztof Grzelak, Marcin Małek
Wear Analysis of Additively Manufactured Slipper-Retainer in the Axial Piston Pump. Materials (Basel, Switzerland) 15 (6) (2022)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Ireneusz Szachogłuchowicz, Bartosz Fikus, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Jakub Łuszczek
Selective Laser Melted M300 Maraging Steel-Material Behaviour during Ballistic Testing. Materials (Basel, Switzerland) 14 (10) (2021)
Krzysztof Grzelak, Julia Łaszcz, Jakub Polkowski, Piotr Mastalski, Janusz Kluczyński, Jakub Łuszczek, Janusz Torzewski, Ireneusz Szachogłuchowicz, Rafał Szymaniuk
Additive Manufacturing of Plastics Used for Protection against COVID19-The Influence of Chemical Disinfection by Alcohol on the Properties of ABS and PETG Polymers. Materials (Basel, Switzerland) 14 (17) (2021)