Krzysztof Grzelak

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2018-2024
Publications (10 Years): 33

Top Venues

Materials (Basel, Switzerland)

Military University of Technology in Warsaw

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Military University of Technology in Warsaw Oct 01 2007

Poland

assistant professor/ Ph. D. :: Mechanical Engineering

Publications

Katarzyna Jasik, Lucjan Sniezek, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz
17-4 PH Steel Parts Obtained through MEX and PBF-LB/M Technologies: Comparison of the Structural Properties. Materials (Basel, Switzerland) 17 (12) (2024)
Katarzyna Jasik, Lucjan Sniezek, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz
17-4 PH Steel Parts Obtained through MEX and PBF-LB/M Technologies: Comparison of the Structural Properties. Materials (Basel, Switzerland) 17 (12) (2024)
Katarzyna Jasik, Janusz Kluczyński, Danuta Miedzińska, Arkadiusz Popławski, Jakub Łuszczek, Justyna Zygmuntowicz, Paulina Piotrkiewicz, Krzysztof Perkowski, Marcin Wachowski, Krzysztof Grzelak
Comparison of Additively Manufactured Polymer-Ceramic Parts Obtained via Different Technologies. Materials (Basel, Switzerland) 17 (1) (2024)
Marcin Małek, Janusz Kluczyński, Katarzyna Jasik, Emil Kardaszuk, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Krzysztof Grzelak, Ireneusz Ewiak
An Eco-Friendly and Innovative Approach in Building Engineering: The Production of Cement-Glass Composite Bricks with Recycled Polymeric Reinforcements. Materials (Basel, Switzerland) 17 (3) (2024)
Marcin Małek, Janusz Kluczyński, Katarzyna Jasik, Emil Kardaszuk, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Krzysztof Grzelak, Ireneusz Ewiak
An Eco-Friendly and Innovative Approach in Building Engineering: The Production of Cement-Glass Composite Bricks with Recycled Polymeric Reinforcements. Materials (Basel, Switzerland) 17 (3) (2024)
Katarzyna Jasik, Janusz Kluczyński, Danuta Miedzińska, Arkadiusz Popławski, Jakub Łuszczek, Justyna Zygmuntowicz, Paulina Piotrkiewicz, Krzysztof Perkowski, Marcin Wachowski, Krzysztof Grzelak
Comparison of Additively Manufactured Polymer-Ceramic Parts Obtained via Different Technologies. Materials (Basel, Switzerland) 17 (1) (2024)
Janusz Kluczyński, Katarzyna Jasik, Jakub Łuszczek, Bartłomiej Sarzyński, Krzysztof Grzelak, Tomáš Dražan, Zdeněk Joska, Ireneusz Szachogłuchowicz, Paweł Płatek, Marcin Małek
A Comparative Investigation of Properties of Metallic Parts Additively Manufactured through MEX and PBF-LB/M Technologies. Materials (Basel, Switzerland) 16 (14) (2023)
Piotr Sawczuk, Janusz Kluczyński, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz, Katarzyna Jasik, Jakub Łuszczek, Krzysztof Grzelak, Paweł Płatek, Janusz Torzewski, Marcin Małek
Regeneration of the Damaged Parts with the Use of Metal Additive Manufacturing-Case Study. Materials (Basel, Switzerland) 16 (10) (2023)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Marcin Małek, Janusz Kluczyński, Waldemar Łasica, Mateusz Jackowski, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Krzysztof Grzelak
Performance Properties of Cement-Glass Composite Bricks (CGCB) with Additively Manufactured (AM) Polymeric Scaffolding. Materials (Basel, Switzerland) 16 (5) (2023)
Marcin Małek, Janusz Kluczyński, Waldemar Łasica, Mateusz Jackowski, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Krzysztof Grzelak
Performance Properties of Cement-Glass Composite Bricks (CGCB) with Additively Manufactured (AM) Polymeric Scaffolding. Materials (Basel, Switzerland) 16 (5) (2023)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Janusz Torzewski, Magdalena Łazińska, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Mierzyński
Microstructure and Mechanical Properties of Dissimilar Friction Stir Welded Joint AA7020/AA5083 with Different Joining Parameters. Materials (Basel, Switzerland) 15 (5) (2022)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Michał Mazurkiewicz, Janusz Kluczyński, Katarzyna Jasik, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Lucjan Sniezek, Krzysztof Grzelak, Marcin Małek
Bending Strength of Polyamide-Based Composites Obtained during the Fused Filament Fabrication (FFF) Process. Materials (Basel, Switzerland) 15 (14) (2022)
Krzysztof Grzelak, Marcin Bielecki, Janusz Kluczyński, Ireneusz Szachogłuchowicz, Lucjan Sniezek, Janusz Torzewski, Jakub Łuszczek, Łukasz Słoboda, Marcin Wachowski, Zenon Komorek, Marcin Małek, Justyna Zygmuntowicz
A Comparative Study on Laser Powder Bed Fusion of Differently Atomized 316L Stainless Steel. Materials (Basel, Switzerland) 15 (14) (2022)
Natalia Rońda, Krzysztof Grzelak, Marek Polański, Julita Dworecka-Wójcik
The Influence of Layer Thickness on the Microstructure and Mechanical Properties of M300 Maraging Steel Additively Manufactured by LENS ® Technology. Materials (Basel, Switzerland) 15 (2) (2022)
Agnieszka Klimek, Janusz Kluczyński, Jakub Łuszczek, Adam Bartnicki, Krzysztof Grzelak, Marcin Małek
Wear Analysis of Additively Manufactured Slipper-Retainer in the Axial Piston Pump. Materials (Basel, Switzerland) 15 (6) (2022)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Ireneusz Szachogłuchowicz, Bartosz Fikus, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Jakub Łuszczek
Selective Laser Melted M300 Maraging Steel-Material Behaviour during Ballistic Testing. Materials (Basel, Switzerland) 14 (10) (2021)
Meet Gor, Harsh Soni, Vishal Wankhede, Pankaj Sahlot, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Kluczyński
A Critical Review on Effect of Process Parameters on Mechanical and Microstructural Properties of Powder-Bed Fusion Additive Manufacturing of SS316L. Materials (Basel, Switzerland) 14 (21) (2021)
Krzysztof Grzelak, Julia Łaszcz, Jakub Polkowski, Piotr Mastalski, Janusz Kluczyński, Jakub Łuszczek, Janusz Torzewski, Ireneusz Szachogłuchowicz, Rafał Szymaniuk
Additive Manufacturing of Plastics Used for Protection against COVID19-The Influence of Chemical Disinfection by Alcohol on the Properties of ABS and PETG Polymers. Materials (Basel, Switzerland) 14 (17) (2021)
Janusz Kluczyński, Lucjan Sniezek, Krzysztof Grzelak, Artur Oziębło, Krzysztof Perkowski, Janusz Torzewski, Ireneusz Szachogłuchowicz, Krzysztof Gocman, Marcin Wachowski, Bogusz Kania
Comparison of Different Heat Treatment Processes of Selective Laser Melted 316L Steel Based on Analysis of Mechanical Properties. Materials (Basel, Switzerland) 13 (17) (2020)
Krzysztof Grzelak, Janusz Kluczyński, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Lucjan Sniezek, Janusz Torzewski
Modification of Structural Properties Using Process Parameters and Surface Treatment of Monolithic and Thin-Walled Parts Obtained by Selective Laser Melting. Materials (Basel, Switzerland) 13 (24) (2020)
Janusz Kluczyński, Lucjan Sniezek, Alexander Kravcov, Krzysztof Grzelak, Pavel Svoboda, Ireneusz Szachogłuchowicz, Ondřej Franek, Nikolaj Morozov, Janusz Torzewski, Petr Kubeček
The Examination of Restrained Joints Created in the Process of Multi-Material FFF Additive Manufacturing Technology. Materials (Basel, Switzerland) 13 (4) (2020)
Janusz Torzewski, Krzysztof Grzelak, Marcin Wachowski, Robert Kosturek
Microstructure and Low Cycle Fatigue Properties of AA5083 H111 Friction Stir Welded Joint. Materials (Basel, Switzerland) 13 (10) (2020)
Ireneusz Szachogłuchowicz, Lucjan Sniezek, Tomasz Slezak, Janusz Kluczyński, Krzysztof Grzelak, Janusz Torzewski, Teresa Fras
Mechanical Properties Analysis of the AA2519-AA1050-Ti6Al4V Explosive Welded Laminate. Materials (Basel, Switzerland) 13 (19) (2020)
Janusz Kluczyński, Lucjan Sniezek, Krzysztof Grzelak, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Jakub Łuszczek
Crack Growth Behavior of Additively Manufactured 316L Steel-Influence of Build Orientation and Heat Treatment. Materials (Basel, Switzerland) 13 (15) (2020)
Janusz Kluczyński, Lucjan Sniezek, Krzysztof Grzelak, Janusz Torzewski, Ireneusz Szachogłuchowicz, Artur Oziębło, Krzysztof Perkowski, Marcin Wachowski, Marcin Małek
The Influence of Heat Treatment on Low Cycle Fatigue Properties of Selectively Laser Melted 316L Steel. Materials (Basel, Switzerland) 13 (24) (2020)
Janusz Kluczyński, Lucjan Sniezek, Krzysztof Grzelak, Jacek Janiszewski, Paweł Płatek, Janusz Torzewski, Ireneusz Szachogłuchowicz, Krzysztof Gocman
Influence of Selective Laser Melting Technological Parameters on the Mechanical Properties of Additively Manufactured Elements Using 316L Austenitic Steel. Materials (Basel, Switzerland) 13 (6) (2020)
Janusz Kluczyński, Lucjan Śnieżek, Krzysztof Grzelak, Janusz Mierzyński
The Influence of Exposure Energy Density on Porosity and Microhardness of the SLM Additive Manufactured Elements. Materials (Basel, Switzerland) 11 (11) (2018)

Krzysztof Grzelak.css-eqlu8i{font-size:small;padding-left:4px;}

Publication Activity (10 Years)

Top Topics

Top Venues

Krzysztof Grzelak