Lucjan Sniezek (Lucjan Śnieżek)

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2019-2024
Publications (10 Years): 34

Top Venues

Materials (Basel, Switzerland)

Military University of Technology in Warsaw

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Military University of Technology in Warsaw

Poland

Prof. :: Faculty of Mechanical Engineering

Publications

Katarzyna Jasik, Lucjan Sniezek, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz
17-4 PH Steel Parts Obtained through MEX and PBF-LB/M Technologies: Comparison of the Structural Properties. Materials (Basel, Switzerland) 17 (12) (2024)
Katarzyna Jasik, Lucjan Sniezek, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz
17-4 PH Steel Parts Obtained through MEX and PBF-LB/M Technologies: Comparison of the Structural Properties. Materials (Basel, Switzerland) 17 (12) (2024)
Ireneusz Szachogłuchowicz, Lucjan Sniezek, Adam Wójcik
Mechanical Properties of the AlCu4Mg1 Alloy Joint Manufactured by Underwater Friction Stir Welding. Materials (Basel, Switzerland) 17 (8) (2024)
Ireneusz Szachogłuchowicz, Lucjan Sniezek, Adam Wójcik
Mechanical Properties of the AlCu4Mg1 Alloy Joint Manufactured by Underwater Friction Stir Welding. Materials (Basel, Switzerland) 17 (8) (2024)
Justyna Zygmuntowicz, Magdalena Kosiorek, Marcin Wachowski, Lucjan Sniezek, Ireneusz Szachogłuchowicz, Paulina Piotrkiewicz, Waldemar Kaszuwara, Katarzyna Konopka
The Structural and Mechanical Properties of Al 2 O 3 -Ni Composites Obtained by Magnetic Field-Assisted Centrifugal Slip Casting. Materials (Basel, Switzerland) 17 (16) (2024)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Wojciech Ziółkowski, Dariusz Boroński, Andrzej Skibicki, Radosław Stachowiak, Robert Kosturek, Lucjan Sniezek
Mechanical Properties and Microstructure of Dissimilar S355/AA6061-T6 FSW Butt Joints. Materials (Basel, Switzerland) 16 (17) (2023)
Robert Kosturek, Tomasz Slezak, Janusz Torzewski, Magdalena Bucior, Władysław Zielecki, Lucjan Sniezek, Jarosław Sęp
Effect of Shot Peening on the Low-Cycle Fatigue Behavior of an AA2519-T62 Friction-Stir-Welded Butt Joint. Materials (Basel, Switzerland) 16 (22) (2023)
Bartłomiej Sarzyński, Janusz Kluczyński, Jakub Łuszczek, Krzysztof Grzelak, Ireneusz Szachogłuchowicz, Janusz Torzewski, Lucjan Sniezek
Process Parameter Investigation and Torsional Strength Analysis of the Additively Manufactured 3D Structures Made of 20MnCr5 Steel. Materials (Basel, Switzerland) 16 (5) (2023)
Robert Kosturek, Janusz Torzewski, Marcin Wachowski, Lucjan Sniezek
Effect of Welding Parameters on Mechanical Properties and Microstructure of Friction Stir Welded AA7075-T651 Aluminum Alloy Butt Joints. Materials (Basel, Switzerland) 15 (17) (2022)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Michał Mazurkiewicz, Janusz Kluczyński, Katarzyna Jasik, Bartłomiej Sarzyński, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Janusz Torzewski, Lucjan Sniezek, Krzysztof Grzelak, Marcin Małek
Bending Strength of Polyamide-Based Composites Obtained during the Fused Filament Fabrication (FFF) Process. Materials (Basel, Switzerland) 15 (14) (2022)
Marcin Wachowski, Justyna Zygmuntowicz, Robert Kosturek, Lucjan Sniezek, Paulina Piotrkiewicz
Properties of Al 2 O 3 /Ti/Ni Composite Obtained by Slip Casting with Different Metal Phase Content. Materials (Basel, Switzerland) 15 (19) (2022)
Marcin Wachowski, Justyna Zygmuntowicz, Robert Kosturek, Paulina Piotrkiewicz, Radosław Żurowski, Anna M Więcław-Midor, Lucjan Sniezek
Study on Manufacturing via Slip Casting and Properties of Alumina-Titanium Composite Enhanced by Thialite Phase. Materials (Basel, Switzerland) 16 (1) (2022)
Marcin Wachowski, Justyna Zygmuntowicz, Robert Kosturek, Paulina Piotrkiewicz, Radosław Żurowski, Anna M Więcław-Midor, Lucjan Sniezek
Study on Manufacturing via Slip Casting and Properties of Alumina-Titanium Composite Enhanced by Thialite Phase. Materials (Basel, Switzerland) 16 (1) (2022)
Krzysztof Grzelak, Marcin Bielecki, Janusz Kluczyński, Ireneusz Szachogłuchowicz, Lucjan Sniezek, Janusz Torzewski, Jakub Łuszczek, Łukasz Słoboda, Marcin Wachowski, Zenon Komorek, Marcin Małek, Justyna Zygmuntowicz
A Comparative Study on Laser Powder Bed Fusion of Differently Atomized 316L Stainless Steel. Materials (Basel, Switzerland) 15 (14) (2022)
Marcin Wachowski, Justyna Zygmuntowicz, Robert Kosturek, Paulina Piotrkiewicz, Radosław Żurowski, Anna M Więcław-Midor, Lucjan Sniezek
Study on Manufacturing via Slip Casting and Properties of Alumina-Titanium Composite Enhanced by Thialite Phase. Materials (Basel, Switzerland) 16 (1) (2022)
Ireneusz Szachogłuchowicz, Lucjan Sniezek, Tomasz Slezak
Mechanical Properties Analysis of Explosive Welded Sheet of AA2519-Ti6Al4V with Interlayer of AA1050 Subjected to Heat-Treatment. Materials (Basel, Switzerland) 15 (11) (2022)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Marta Lipińska, Ewa Ura-Bińczyk, Lucjan Sniezek, Paweł Skudniewski, Mariusz Kulczyk, Boguslawa Adamczyk-Cieślak, Kamil Majchrowicz
The Influence of Heat Treatment on the Mechanical Properties and Corrosion Resistance of the Ultrafine-Grained AA7075 Obtained by Hydrostatic Extrusion. Materials (Basel, Switzerland) 15 (12) (2022)
Jakub Łuszczek, Lucjan Sniezek, Krzysztof Grzelak, Janusz Kluczyński, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Marcin Karpiński
Processability of 21NiCrMo2 Steel Using the Laser Powder Bed Fusion: Selection of Process Parameters and Resulting Mechanical Properties. Materials (Basel, Switzerland) 15 (24) (2022)
Marta Lipińska, Ewa Ura-Bińczyk, Lucjan Sniezek, Paweł Skudniewski, Mariusz Kulczyk, Boguslawa Adamczyk-Cieślak, Jarosław Mizera
Increasing the Mechanical Strength and Corrosion Resistance of Aluminum Alloy 7075 via Hydrostatic Extrusion and Aging. Materials (Basel, Switzerland) 15 (13) (2022)
Robert Kosturek, Lucjan Sniezek, Janusz Torzewski, Marcin Wachowski
Low Cycle Fatigue Properties of Sc-Modified AA2519-T62 Extrusion. Materials (Basel, Switzerland) 13 (1) (2020)
Marcin Wachowski, Robert Kosturek, Lucjan Sniezek, Sebastian Mróz, Andrzej Stefanik, Piotr Szota
The Effect of Post-Weld Hot-Rolling on the Properties of Explosively Welded Mg/Al/Ti Multilayer Composite. Materials (Basel, Switzerland) 13 (8) (2020)
Janusz Kluczyński, Lucjan Sniezek, Krzysztof Grzelak, Artur Oziębło, Krzysztof Perkowski, Janusz Torzewski, Ireneusz Szachogłuchowicz, Krzysztof Gocman, Marcin Wachowski, Bogusz Kania
Comparison of Different Heat Treatment Processes of Selective Laser Melted 316L Steel Based on Analysis of Mechanical Properties. Materials (Basel, Switzerland) 13 (17) (2020)
Krzysztof Grzelak, Janusz Kluczyński, Ireneusz Szachogłuchowicz, Jakub Łuszczek, Lucjan Sniezek, Janusz Torzewski
Modification of Structural Properties Using Process Parameters and Surface Treatment of Monolithic and Thin-Walled Parts Obtained by Selective Laser Melting. Materials (Basel, Switzerland) 13 (24) (2020)
Janusz Kluczyński, Lucjan Sniezek, Alexander Kravcov, Krzysztof Grzelak, Pavel Svoboda, Ireneusz Szachogłuchowicz, Ondřej Franek, Nikolaj Morozov, Janusz Torzewski, Petr Kubeček
The Examination of Restrained Joints Created in the Process of Multi-Material FFF Additive Manufacturing Technology. Materials (Basel, Switzerland) 13 (4) (2020)
Ireneusz Szachogłuchowicz, Lucjan Sniezek, Tomasz Slezak, Janusz Kluczyński, Krzysztof Grzelak, Janusz Torzewski, Teresa Fras
Mechanical Properties Analysis of the AA2519-AA1050-Ti6Al4V Explosive Welded Laminate. Materials (Basel, Switzerland) 13 (19) (2020)
Robert Kosturek, Lucjan Sniezek, Janusz Torzewski, Tomasz Slezak, Marcin Wachowski, Ireneusz Szachogłuchowicz
Research on the Properties and Low Cycle Fatigue of Sc-Modified AA2519-T62 FSW Joint. Materials (Basel, Switzerland) 13 (22) (2020)
Janusz Kluczyński, Lucjan Sniezek, Krzysztof Grzelak, Janusz Torzewski, Ireneusz Szachogłuchowicz, Marcin Wachowski, Jakub Łuszczek
Crack Growth Behavior of Additively Manufactured 316L Steel-Influence of Build Orientation and Heat Treatment. Materials (Basel, Switzerland) 13 (15) (2020)
Janusz Kluczyński, Lucjan Sniezek, Krzysztof Grzelak, Janusz Torzewski, Ireneusz Szachogłuchowicz, Artur Oziębło, Krzysztof Perkowski, Marcin Wachowski, Marcin Małek
The Influence of Heat Treatment on Low Cycle Fatigue Properties of Selectively Laser Melted 316L Steel. Materials (Basel, Switzerland) 13 (24) (2020)
Janusz Kluczyński, Lucjan Sniezek, Krzysztof Grzelak, Jacek Janiszewski, Paweł Płatek, Janusz Torzewski, Ireneusz Szachogłuchowicz, Krzysztof Gocman
Influence of Selective Laser Melting Technological Parameters on the Mechanical Properties of Additively Manufactured Elements Using 316L Austenitic Steel. Materials (Basel, Switzerland) 13 (6) (2020)
Robert Kosturek, Lucjan Sniezek, Marcin Wachowski, Janusz Torzewski
The Influence of Post-Weld Heat Treatment on the Microstructure and Fatigue Properties of Sc-Modified AA2519 Friction Stir-Welded Joint. Materials (Basel, Switzerland) 12 (4) (2019)

Lucjan Sniezek.css-eqlu8i{font-size:small;padding-left:4px;} (Lucjan Śnieżek)

Publication Activity (10 Years)

Top Topics

Top Venues

Lucjan Sniezek (Lucjan Śnieżek)