Jana Petrů (Jana Petru)

Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2020-2023
Publications (10 Years): 30

Top Topics

Computed Tomography

Reduced Graphene Oxide

Top Venues

Materials (Basel, Switzerland)

Nanomaterials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Akash Nag, Madhulika Srivastava, Jana Petrů, Petra Váňová, Ashish Kumar Srivastava, Sergej Hloch
Comparison of Continuous and Pulsating Water Jet during Piercing of Ductile Material. Materials (Basel, Switzerland) 16 (9) (2023)
Peter Pokorný, Daynier Rolando Delgado Sobrino, Štefan Václav, Jana Petrů, Rafał Gołębski
Research into Specific Mechanical Properties of Composites Produced by 3D-Printing Additive Continuous-Fiber Fabrication Technology. Materials (Basel, Switzerland) 16 (4) (2023)
Peter Pokorný, Daynier Rolando Delgado Sobrino, Štefan Václav, Jana Petrů, Rafał Gołębski
Research into Specific Mechanical Properties of Composites Produced by 3D-Printing Additive Continuous-Fiber Fabrication Technology. Materials (Basel, Switzerland) 16 (4) (2023)
Peter Pokorný, Daynier Rolando Delgado Sobrino, Štefan Václav, Jana Petrů, Rafał Gołębski
Research into Specific Mechanical Properties of Composites Produced by 3D-Printing Additive Continuous-Fiber Fabrication Technology. Materials (Basel, Switzerland) 16 (4) (2023)
Akash Nag, Madhulika Srivastava, Jana Petrů, Petra Váňová, Ashish Kumar Srivastava, Sergej Hloch
Comparison of Continuous and Pulsating Water Jet during Piercing of Ductile Material. Materials (Basel, Switzerland) 16 (9) (2023)
Adam Gnatowski, Rafał Gołębski, Piotr Sikora, Jana Petrů, Jiří Hajnyš
Analysis of the Impact of Changes in Thermomechanical Properties of Annealed Semi-Crystalline Plastics on the Surface Condition after the Machining Process. Materials (Basel, Switzerland) 16 (13) (2023)
Peter Pokorný, Daynier Rolando Delgado Sobrino, Štefan Václav, Jana Petrů, Rafał Gołębski
Research into Specific Mechanical Properties of Composites Produced by 3D-Printing Additive Continuous-Fiber Fabrication Technology. Materials (Basel, Switzerland) 16 (4) (2023)
Sajid Raza Zaidi, Najam Ul Qadir, Syed Husain Imran Jaffery, Muhammad Ali Khan, Mushtaq Khan, Jana Petrů
Statistical Analysis of Machining Parameters on Burr Formation, Surface Roughness and Energy Consumption during Milling of Aluminium Alloy Al 6061-T6. Materials (Basel, Switzerland) 15 (22) (2022)
Lucie Zárybnická, Jana Petrů, Pavel Krpec, Marek Pagac
Effect of Additives and Print Orientation on the Properties of Laser Sintering-Printed Polyamide 12 Components. Polymers 14 (6) (2022)
Muhammad Azeem, Muhammad Irfan, Manzar Masud, Gulfam Ul Rehman, Haider Ali, Muhammad Umair Ali, Amad Zafar, Usama Muhammad Niazi, Saifur Rahman, Stanislaw Legutko, Jana Petrů, Jiří Kratochvíl
Experimental and Numerical Investigation of Effect of Static and Fatigue Loading on Behavior of Different Double Strap Adhesive Joint Configurations in Fiber Metal Laminates. Materials (Basel, Switzerland) 15 (5) (2022)
Sadaqat Ali, Muhammad Irfan, Usama Muhammad Niazi, Ahmad Majdi Abdul Rani, Ahmad Rashedi, Saifur Rahman, Muhammad Kamal Asif Khan, Mabkhoot A Alsaiari, Stanislaw Legutko, Jana Petrů, Antonin Trefil
Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials (Basel, Switzerland) 15 (8) (2022)
Muhammad Adnan Munir, Muhammad Yasin Naz, Shazia Shukrullah, Muhammad Tamoor Ansar, Muhammad Umar Farooq, Muhammad Irfan, Salim Nasar Faraj Mursal, Stanislaw Legutko, Jana Petrů, Marek Pagac
Enhancement of Magnetic and Dielectric Properties of Ni 0.25 Cu 0.25 Zn 0.50 Fe 2 O 4 Magnetic Nanoparticles through Non-Thermal Microwave Plasma Treatment for High-Frequency and Energy Storage Applications. Materials (Basel, Switzerland) 15 (19) (2022)
Quoc-Phu Ma, Jakub Měsíček, František Fojtík, Jiří Hajnyš, Pavel Krpec, Marek Pagac, Jana Petrů
Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method. Materials (Basel, Switzerland) 15 (17) (2022)
Muhammad Irfan, Shazia Shukrullah, Muhammad Yasin Naz, Irshad Ahmad, Bilal Shoukat, Stanislaw Legutko, Jana Petrů, Saifur Rahman, Mabkhoot A Alsaiari
Si/SiO 2 /Al 2 O 3 Supported Growth of CNT Forest for the Production of La/ZnO/CNT Photocatalyst for Hydrogen Production. Materials (Basel, Switzerland) 15 (9) (2022)
Muhammad Usama Daud, Ghulam Abbas, Muhammad Afzaal, Muhammad Yasin Naz, Nazma Goher Fatima, Abdul Ghuffar, Muhammad Irfan, Mater H Mahnashi, Stanislaw Legutko, Jana Petrů, Jiří Kratochvíl, Usama Muhammad Niazi
Finite Element Analysis of Silver Nanorods, Spheres, Ellipsoids and Core-Shell Structures for Hyperthermia Treatment of Cancer. Materials (Basel, Switzerland) 15 (5) (2022)
Muhammad Sheheryar, Muhammad Ali Khan, Syed Husain Imran Jaffery, Mansoor Alruqi, Rehan Khan, M Nasir Bashir, Jana Petrů
Multi-Objective Optimization of Process Parameters during Micro-Milling of Nickel-Based Alloy Inconel 718 Using Taguchi-Grey Relation Integrated Approach. Materials (Basel, Switzerland) 15 (23) (2022)
Muhammad Sheheryar, Muhammad Ali Khan, Syed Husain Imran Jaffery, Mansoor Alruqi, Rehan Khan, M Nasir Bashir, Jana Petrů
Multi-Objective Optimization of Process Parameters during Micro-Milling of Nickel-Based Alloy Inconel 718 Using Taguchi-Grey Relation Integrated Approach. Materials (Basel, Switzerland) 15 (23) (2022)
Muhammad Sheheryar, Muhammad Ali Khan, Syed Husain Imran Jaffery, Mansoor Alruqi, Rehan Khan, M Nasir Bashir, Jana Petrů
Multi-Objective Optimization of Process Parameters during Micro-Milling of Nickel-Based Alloy Inconel 718 Using Taguchi-Grey Relation Integrated Approach. Materials (Basel, Switzerland) 15 (23) (2022)
Saifur Rahman, Rehan Khan, Usama Muhammad Niazi, Stanislaw Legutko, Muhammad Ali Khan, Bilal Anjum Ahmed, Jana Petrů, Jiří Hajnyš, Muhammad Irfan
Performance Prediction of Erosive Wear of Steel for Two-Phase Flow in an Inverse U-Bend. Materials (Basel, Switzerland) 15 (16) (2022)
Shahroz Saleem, Muhammad Irfan, Muhammad Yasin Naz, Shazia Shukrullah, Muhammad Adnan Munir, Muhammad Ayyaz, Abdullah Saeed Alwadie, Stanislaw Legutko, Jana Petrů, Saifur Rahman
Investigating the Impact of Cu 2+ Doping on the Morphological, Structural, Optical, and Electrical Properties of CoFe 2 O 4 Nanoparticles for Use in Electrical Devices. Materials (Basel, Switzerland) 15 (10) (2022)
Muhammad Irfan, Humaira Hussain, Bisma Saleem, Muhammad Saleem, Shazia Shukrullah, Stanislaw Legutko, Jana Petrů, Muhammad Yasin Naz, Marek Pagac, Saifur Rahman, Rehan Khan
Evaluation of Ultrasonically ZnO Loading Effect on Photocatalytic Self-Cleaning, UV Protection and Antibacterial Activity of Plasma/Citric Acid-Activated Cotton Fabric. Nanomaterials (Basel, Switzerland) 12 (12) (2022)
Adam Gnatowski, Rafał Gołębski, Jana Petrů, Marek Pagac
Analysis of Thermomechanical Properties and the Influence of Machining Process on the Surface Structure of Composites Manufactured from Metal Chips with a Polymer Matrix. Polymers 14 (17) (2022)
Muhammad Irfan, Irshad Ahmad, Shazia Shukrullah, Humaira Hussain, Muhammad Atif, Stanislaw Legutko, Jana Petrů, Michal Hatala, Muhammad Yasin Naz, Saifur Rahman
Construction of 0D/2D Schottky Heterojunctions of ZnO and Ti 3 C 2 Nanosheets with the Enriched Transfer of Interfacial Charges for Photocatalytic Hydrogen Evolution. Materials (Basel, Switzerland) 15 (13) (2022)
Peter Pokorný, Štefan Václav, Jana Petrů, Michaela Kritikos
Porosity Analysis of Additive Manufactured Parts Using CAQ Technology. Materials (Basel, Switzerland) 14 (5) (2021)
Jana Petrů, Marek Pagac, Martin Grepl
Laser Beam Drilling of Inconel 718 and Its Effect on Mechanical Properties Determined by Static Uniaxial Tensile Testing at Room and Elevated Temperatures. Materials (Basel, Switzerland) 14 (11) (2021)
Gabriel Stolárik, Akash Nag, Jana Petrů, Jaroslava Svobodová, Sergej Hloch
Ultrasonic Pulsating Water Jet Peening: Influence of Pressure and Pattern Strategy. Materials (Basel, Switzerland) 14 (20) (2021)
Madhulika Srivastava, Akash Nag, Lucie Krejčí, Jana Petrů, Somnath Chattopadhyaya, Sergej Hloch
Effect of Periodic Water Clusters on AISI 304 Welded Surfaces. Materials (Basel, Switzerland) 14 (1) (2021)
Jiří Hajnyš, Marek Pagac, Jakub Měsíček, Jana Petrů, Mariusz Król
Influence of Scanning Strategy Parameters on Residual Stress in the SLM Process According to the Bridge Curvature Method for AISI 316L Stainless Steel. Materials (Basel, Switzerland) 13 (7) (2020)
Josef Hlinka, Martin Kraus, Jiri Hajnys, Marek Pagac, Jana Petrů, Zbigniew Brytan, Tomasz Tański
Complex Corrosion Properties of AISI 316L Steel Prepared by 3D Printing Technology for Possible Implant Applications. Materials (Basel, Switzerland) 13 (7) (2020)
Mariusz Król, Przemysław Snopiński, Marek Pagac, Jiří Hajnyš, Jana Petrů
Hot Deformation Treatment of Grain-Modified Mg-Li Alloy. Materials (Basel, Switzerland) 13 (20) (2020)