Stanislaw Legutko (Stanisław Legutko)

Publication Activity (10 Years)

Years Active: 2020-2024
Publications (10 Years): 49

Top Topics

Wastewater Treatment

Finite Element Analysis

Gold Nanoparticles

Top Venues

Materials (Basel, Switzerland)

Sensors (Basel, Switzerland)

Nanomaterials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Ireneusz Zagórski, Piotr Zgórniak, Witold Habrat, José Machado, Stanislaw Legutko
Methodology of Chip Temperature Measurement and Safety Machining Assessment in Dry Rough Milling of Magnesium Alloys Using Different Helix Angle Tools. Materials (Basel, Switzerland) 17 (9) (2024)
Magdalena Zawada-Michałowska, Paweł Pieśko, Grażyna Mrówka-Nowotnik, Andrzej Nowotnik, Stanislaw Legutko
Effect of the Technological Parameters of Milling on Residual Stress in the Surface Layer of Thin-Walled Plates. Materials (Basel, Switzerland) 17 (5) (2024)
Ireneusz Zagórski, Piotr Zgórniak, Witold Habrat, José Machado, Stanislaw Legutko
Methodology of Chip Temperature Measurement and Safety Machining Assessment in Dry Rough Milling of Magnesium Alloys Using Different Helix Angle Tools. Materials (Basel, Switzerland) 17 (9) (2024)
Magdalena Zawada-Michałowska, Paweł Pieśko, Grażyna Mrówka-Nowotnik, Andrzej Nowotnik, Stanislaw Legutko
Effect of the Technological Parameters of Milling on Residual Stress in the Surface Layer of Thin-Walled Plates. Materials (Basel, Switzerland) 17 (5) (2024)
Magdalena Zawada-Michałowska, Paweł Pieśko, Grażyna Mrówka-Nowotnik, Andrzej Nowotnik, Stanislaw Legutko
Effect of the Technological Parameters of Milling on Residual Stress in the Surface Layer of Thin-Walled Plates. Materials (Basel, Switzerland) 17 (5) (2024)
Piotr Szablewski, Stanislaw Legutko, Adrian Mróz, Dariusz Garbiec, Rafał Czajka, Krzysztof Smak, Bartłomiej Krawczyk
Surface Topography Description after Turning Inconel 718 with a Conventional, Wiper and Special Insert Made by the SPS Technique. Materials (Basel, Switzerland) 16 (3) (2023)
Piotr Szablewski, Stanislaw Legutko, Adrian Mróz, Dariusz Garbiec, Rafał Czajka, Krzysztof Smak, Bartłomiej Krawczyk
Surface Topography Description after Turning Inconel 718 with a Conventional, Wiper and Special Insert Made by the SPS Technique. Materials (Basel, Switzerland) 16 (3) (2023)
Krzysztof Smak, Piotr Szablewski, Stanislaw Legutko, Bartłomiej Krawczyk, Edward Miko
Investigation of the Influence of Anti-Wear Coatings on the Surface Quality and Dimensional Accuracy during Finish Turning of the Inconel 718 Alloy. Materials (Basel, Switzerland) 16 (2) (2023)
Michał Zawada, Mateusz Nijak, Jarosław Mac, Jan Szczepaniak, Stanislaw Legutko, Julia Gościańska-Łowińska, Sebastian Szymczyk, Michał Kaźmierczak, Mikołaj Zwierzyński, Jacek Wojciechowski, Tomasz Szulc, Roman Rogacki
Control and Measurement Systems Supporting the Production of Haylage in Baler-Wrapper Machines. Sensors (Basel, Switzerland) 23 (6) (2023)
Krzysztof Smak, Piotr Szablewski, Stanislaw Legutko, Bartłomiej Krawczyk, Edward Miko
Investigation of the Influence of Anti-Wear Coatings on the Surface Quality and Dimensional Accuracy during Finish Turning of the Inconel 718 Alloy. Materials (Basel, Switzerland) 16 (2) (2023)
Piotr Szablewski, Stanislaw Legutko, Adrian Mróz, Dariusz Garbiec, Rafał Czajka, Krzysztof Smak, Bartłomiej Krawczyk
Surface Topography Description after Turning Inconel 718 with a Conventional, Wiper and Special Insert Made by the SPS Technique. Materials (Basel, Switzerland) 16 (3) (2023)
Michał Zawada, Mateusz Nijak, Jarosław Mac, Jan Szczepaniak, Stanislaw Legutko, Julia Gościańska-Łowińska, Sebastian Szymczyk, Michał Kaźmierczak, Mikołaj Zwierzyński, Jacek Wojciechowski, Tomasz Szulc, Roman Rogacki
Control and Measurement Systems Supporting the Production of Haylage in Baler-Wrapper Machines. Sensors (Basel, Switzerland) 23 (6) (2023)
Krzysztof Smak, Piotr Szablewski, Stanislaw Legutko, Bartłomiej Krawczyk, Edward Miko
Investigation of the Influence of Anti-Wear Coatings on the Surface Quality and Dimensional Accuracy during Finish Turning of the Inconel 718 Alloy. Materials (Basel, Switzerland) 16 (2) (2023)
Muhammad Irfan, Fareeda Zaheer, Humaira Hussain, Muhammad Yasin Naz, Shazia Shukrullah, Stanislaw Legutko, Mater H Mahnashi, Mabkhoot A Alsaiari, Abdulnour Ali Jazem Ghanim, Saifur Rahman, Omar Alshorman, Fahad Salem Alkahtani, Mohammad K A Khan, Izabela Kruszelnicka, Dobrochna Ginter-Kramarczyk
Kinetics and Adsorption Isotherms of Amine-Functionalized Magnesium Ferrite Produced Using Sol-Gel Method for Treatment of Heavy Metals in Wastewater. Materials (Basel, Switzerland) 15 (11) (2022)
Muhammad Azeem, Muhammad Irfan, Manzar Masud, Gulfam Ul Rehman, Haider Ali, Muhammad Umair Ali, Amad Zafar, Usama Muhammad Niazi, Saifur Rahman, Stanislaw Legutko, Jana Petrů, Jiří Kratochvíl
Experimental and Numerical Investigation of Effect of Static and Fatigue Loading on Behavior of Different Double Strap Adhesive Joint Configurations in Fiber Metal Laminates. Materials (Basel, Switzerland) 15 (5) (2022)
Bartłomiej Krawczyk, Piotr Szablewski, Michał Mendak, Bartosz Gapiński, Krzysztof Smak, Stanislaw Legutko, Michal Wieczorowski, Edward Miko
Surface Topography Description of Threads Made with Turning on Inconel 718 Shafts. Materials (Basel, Switzerland) 16 (1) (2022)
Volodymyr Nahornyi, Anton Panda, Jan Valíček, Marta Harničárová, Milena Kušnerová, Iveta Pandová, Stanislaw Legutko, Zuzana Palková, Ondrej Lukáč
Method of Using the Correlation between the Surface Roughness of Metallic Materials and the Sound Generated during the Controlled Machining Process. Materials (Basel, Switzerland) 15 (3) (2022)
Sadaqat Ali, Muhammad Irfan, Usama Muhammad Niazi, Ahmad Majdi Abdul Rani, Ahmad Rashedi, Saifur Rahman, Muhammad Kamal Asif Khan, Mabkhoot A Alsaiari, Stanislaw Legutko, Jana Petrů, Antonin Trefil
Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials (Basel, Switzerland) 15 (8) (2022)
Muhammad Adnan Munir, Muhammad Yasin Naz, Shazia Shukrullah, Muhammad Tamoor Ansar, Muhammad Umar Farooq, Muhammad Irfan, Salim Nasar Faraj Mursal, Stanislaw Legutko, Jana Petrů, Marek Pagac
Enhancement of Magnetic and Dielectric Properties of Ni 0.25 Cu 0.25 Zn 0.50 Fe 2 O 4 Magnetic Nanoparticles through Non-Thermal Microwave Plasma Treatment for High-Frequency and Energy Storage Applications. Materials (Basel, Switzerland) 15 (19) (2022)
Bartłomiej Krawczyk, Piotr Szablewski, Michał Mendak, Bartosz Gapiński, Krzysztof Smak, Stanislaw Legutko, Michal Wieczorowski, Edward Miko
Surface Topography Description of Threads Made with Turning on Inconel 718 Shafts. Materials (Basel, Switzerland) 16 (1) (2022)
Muhammad Irfan, Shazia Shukrullah, Muhammad Yasin Naz, Irshad Ahmad, Bilal Shoukat, Stanislaw Legutko, Jana Petrů, Saifur Rahman, Mabkhoot A Alsaiari
Si/SiO 2 /Al 2 O 3 Supported Growth of CNT Forest for the Production of La/ZnO/CNT Photocatalyst for Hydrogen Production. Materials (Basel, Switzerland) 15 (9) (2022)
Pawel Zawadzki, Rafał Talar, Adam Patalas, Stanislaw Legutko
Influence of Machining Parameters on Cutting and Chip-Formation Process during Cortical Bone Orthogonal Machining. Materials (Basel, Switzerland) 15 (18) (2022)
Bartłomiej Krawczyk, Piotr Szablewski, Michał Mendak, Bartosz Gapiński, Krzysztof Smak, Stanislaw Legutko, Michal Wieczorowski, Edward Miko
Surface Topography Description of Threads Made with Turning on Inconel 718 Shafts. Materials (Basel, Switzerland) 16 (1) (2022)
Saba Afzal, Humaira Hussain, Muhammad Yasin Naz, Shazia Shukrullah, Irshad Ahmad, Muhammad Irfan, Salim Nasar Faraj Mursal, Stanislaw Legutko, Izabela Kruszelnicka, Dobrochna Ginter-Kramarczyk
Catalytic Hydrogen Evolution from H 2 S Cracking over Cr x ZnS Catalyst in a Cylindrical Single-Layered Dielectric Barrier Discharge Plasma Reactor. Materials (Basel, Switzerland) 15 (21) (2022)
Muhammad Usama Daud, Ghulam Abbas, Muhammad Afzaal, Muhammad Yasin Naz, Nazma Goher Fatima, Abdul Ghuffar, Muhammad Irfan, Mater H Mahnashi, Stanislaw Legutko, Jana Petrů, Jiří Kratochvíl, Usama Muhammad Niazi
Finite Element Analysis of Silver Nanorods, Spheres, Ellipsoids and Core-Shell Structures for Hyperthermia Treatment of Cancer. Materials (Basel, Switzerland) 15 (5) (2022)
Muhammad Irfan, Sharjeel Waqas, Ushtar Arshad, Javed Akbar Khan, Stanislaw Legutko, Izabela Kruszelnicka, Dobrochna Ginter-Kramarczyk, Saifur Rahman, Anna Skrzypczak
Response Surface Methodology and Artificial Neural Network Modelling of Membrane Rotating Biological Contactors for Wastewater Treatment. Materials (Basel, Switzerland) 15 (5) (2022)
Saifur Rahman, Rehan Khan, Usama Muhammad Niazi, Stanislaw Legutko, Muhammad Ali Khan, Bilal Anjum Ahmed, Jana Petrů, Jiří Hajnyš, Muhammad Irfan
Performance Prediction of Erosive Wear of Steel for Two-Phase Flow in an Inverse U-Bend. Materials (Basel, Switzerland) 15 (16) (2022)
Shahroz Saleem, Muhammad Irfan, Muhammad Yasin Naz, Shazia Shukrullah, Muhammad Adnan Munir, Muhammad Ayyaz, Abdullah Saeed Alwadie, Stanislaw Legutko, Jana Petrů, Saifur Rahman
Investigating the Impact of Cu 2+ Doping on the Morphological, Structural, Optical, and Electrical Properties of CoFe 2 O 4 Nanoparticles for Use in Electrical Devices. Materials (Basel, Switzerland) 15 (10) (2022)
Rao Adeel Un Nabi, Muhammad Yasin Naz, Shazia Shukrullah, Madiha Ghamkhar, Najeeb Ur Rehman, Muhammad Irfan, Ali O Alqarni, Stanislaw Legutko, Izabela Kruszelnicka, Dobrochna Ginter-Kramarczyk, Marek Ochowiak, Sylwia Włodarczak, Andżelika Krupińska, Magdalena Matuszak
Analysis of Statistically Predicted Rate Constants for Pyrolysis of High-Density Plastic Using R Software. Materials (Basel, Switzerland) 15 (17) (2022)
Muhammad Irfan, Humaira Hussain, Bisma Saleem, Muhammad Saleem, Shazia Shukrullah, Stanislaw Legutko, Jana Petrů, Muhammad Yasin Naz, Marek Pagac, Saifur Rahman, Rehan Khan
Evaluation of Ultrasonically ZnO Loading Effect on Photocatalytic Self-Cleaning, UV Protection and Antibacterial Activity of Plasma/Citric Acid-Activated Cotton Fabric. Nanomaterials (Basel, Switzerland) 12 (12) (2022)
Muhammad Qamar, Ghulam Abbas, Muhammad Afzaal, Muhammad Y Naz, Abdul Ghuffar, Muhammad Irfan, Stanislaw Legutko, Jerzy Józwik, Magdalena Zawada-Michałowska, Abdulnour Ali Jazem Ghanim, Saifur Rahman, Usama Muhammad Niazi, Mohammad Jalalah, Fahad Salem Alkahtani, Mohammad K A Khan, Ewelina Kosicka
Gold Nanorods for Doxorubicin Delivery: Numerical Analysis of Electric Field Enhancement, Optical Properties and Drug Loading/Releasing Efficiency. Materials (Basel, Switzerland) 15 (5) (2022)
Muhammad Irfan, Irshad Ahmad, Shazia Shukrullah, Humaira Hussain, Muhammad Atif, Stanislaw Legutko, Jana Petrů, Michal Hatala, Muhammad Yasin Naz, Saifur Rahman
Construction of 0D/2D Schottky Heterojunctions of ZnO and Ti 3 C 2 Nanosheets with the Enriched Transfer of Interfacial Charges for Photocatalytic Hydrogen Evolution. Materials (Basel, Switzerland) 15 (13) (2022)
Jakub Hajkowski, Robert Sika, Michał Rogalewicz, Paweł Popielarski, Waldemar Matysiak, Stanislaw Legutko
Material Databases and Validation in Modelling the Structure of Castings Using the Cellular Automaton Method. Materials (Basel, Switzerland) 14 (11) (2021)
Marek Kowalik, Tomasz Trzepiecinski, Leon Kukiełka, Piotr Paszta, Paweł Maciąg, Stanislaw Legutko
Experimental and Numerical Analysis of the Depth of the Strengthened Layer on Shafts Resulting from Roller Burnishing with Roller Braking Moment. Materials (Basel, Switzerland) 14 (19) (2021)
Kazimierz Antoni Orlowski, Daniel Chuchala, Tomasz Przybylinski, Stanislaw Legutko
Recovering Evaluation of Narrow-Kerf Teeth of Mini Sash Gang Saws. Materials (Basel, Switzerland) 14 (23) (2021)
Amjid Khan, Muhammad Irfan, Usama Muhammad Niazi, Imran Shah, Stanislaw Legutko, Saifur Rahman, Abdullah Saeed Alwadie, Mohammed Jalalah, Adam Glowacz, Mohammad Kamal Asif Khan
Centrifugal Compressor Stall Control by the Application of Engineered Surface Roughness on Diffuser Shroud Using Numerical Simulations. Materials (Basel, Switzerland) 14 (8) (2021)
Răzvan Păcurar, Petru Berce, Ovidiu Nemeș, Diana-Irinel Băilă, Dan Sergiu Stan, Alexandru Oarcea, Florin Popişter, Cristina Miron Borzan, Sven Maricic, Stanislaw Legutko, Ancuţa Păcurar
Cast Iron Parts Obtained in Ceramic Molds Produced by Binder Jetting 3D Printing-Morphological and Mechanical Characterization. Materials (Basel, Switzerland) 14 (16) (2021)
Magdalena Zawada-Michałowska, Paweł Pieśko, Jerzy Józwik, Stanislaw Legutko, Leon Kukiełka
A Comparison of the Geometrical Accuracy of Thin-Walled Elements Made of Different Aluminum Alloys. Materials (Basel, Switzerland) 14 (23) (2021)
Piotr Horajski, Lukasz Bohdal, Leon Kukielka, Radosław Patyk, Pawel Kaldunski, Stanislaw Legutko
Advanced Structural and Technological Method of Reducing Distortion in Thin-Walled Welded Structures. Materials (Basel, Switzerland) 14 (3) (2021)
Muhammad Irfan, Rab Nawaz, Javed Akbar Khan, Habib Ullah, Tahir Haneef, Stanislaw Legutko, Saifur Rahman, Jerzy Józwik, Mabkhoot A Alsaiari, Mohammad Kamal Asif Khan, Salim Nasar Faraj Mursal, Fahad Salem AlKahtani, Omar Alshorman, Abdulnour Ali Jazem Ghanim
Synthesis and Characterization of Manganese-Modified Black TiO2 Nanoparticles and Their Performance Evaluation for the Photodegradation of Phenolic Compounds from Wastewater. Materials (Basel, Switzerland) 14 (23) (2021)
Bartłomiej Krawczyk, Piotr Szablewski, Stanislaw Legutko, Krzysztof Smak, Bartosz Gapiński
Anomalies in the Geometric Surface Structure of Shaped Elements Composed of Inconel 718 Alloy. Materials (Basel, Switzerland) 14 (24) (2021)
Sadaqat Ali, Muhammad Irfan, Usama Muhammad Niazi, Ahmad Majdi Abdul Rani, Imran Shah, Stanislaw Legutko, Saifur Rahman, Mohammad Jalalah, Mabkhoot A Alsaiari, Adam Glowacz, Fahad Salem AlKahtani
Synthesis, Surface Nitriding and Characterization of Ti-Nb Modified 316L Stainless Steel Alloy Using Powder Metallurgy. Materials (Basel, Switzerland) 14 (12) (2021)
Szymon Wojciechowski, Rafał Talar, Pawel Zawadzki, Stanislaw Legutko, Radosław Maruda, Chander Parkash
Study on Technological Effects of a Precise Grooving of AlSi13MgCuNi Alloy with a Novel WCCo/PCD (DDCC) Inserts. Materials (Basel, Switzerland) 13 (11) (2020)
Kamil Leksycki, Eugene Feldshtein, Grzegorz M Królczyk, Stanislaw Legutko
On the Chip Shaping and Surface Topography When Finish Cutting 17-4 PH Precipitation-Hardening Stainless Steel under Near-Dry Cutting Conditions. Materials (Basel, Switzerland) 13 (9) (2020)
Shailesh Kumar Singh, Somnath Chattopadhyaya, Alokesh Pramanik, Sanjeev Kumar, Animesh Kumar Basak, Shailesh M Pandey, Qasim Murtaza, Stanislaw Legutko, Grzegorz Litak
Tribological Properties of Chromium Nitride on the Cylinder Liner under the Influence of High Temperature. Materials (Basel, Switzerland) 13 (20) (2020)
Magdalena Zawada-Michałowska, Józef Kuczmaszewski, Stanislaw Legutko, Paweł Pieśko
Techniques for Thin-Walled Element Milling with Respect to Minimising Post-Machining Deformations. Materials (Basel, Switzerland) 13 (21) (2020)
Magdalena Zawada-Michałowska, Jerzy Józwik, Stanislaw Legutko, Dariusz Mika, Paweł Pieśko, Jarosław Alexander Pytka
Cutting Force during Surface Layer Milling of Selected Aluminium Alloys. Materials (Basel, Switzerland) 13 (24) (2020)
Lukasz Bohdal, Leon Kukiełka, Stanislaw Legutko, Radosław Patyk, Andrii M Radchenko
Modeling and Experimental Analysis of Shear-Slitting of AA6111-T4 Aluminum Alloy Sheet. Materials (Basel, Switzerland) 13 (14) (2020)
Cosmin Cosma, Igor Drstvenšek, Petru Berce, Simon Prunean, Stanislaw Legutko, Catalin Popa, Nicolae Balc
Physical-Mechanical Characteristics and Microstructure of Ti6Al7Nb Lattice Structures Manufactured by Selective Laser Melting. Materials (Basel, Switzerland) 13 (18) (2020)