Marek Pagac (Marek Pagáč)

Publication Activity (10 Years)

Years Active: 2020-2023
Publications (10 Years): 23

Top Topics

Gold Nanoparticles

Top Venues

Materials (Basel, Switzerland)

Nanomaterials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Aleksandra Mikulikova, Jakub Měsíček, Jan Karger, Jiří Hajnyš, Quoc-Phu Ma, Aleš Slíva, Jakub Smiraus, David Srnicek, Samuel Cienciala, Marek Pagac
Topology Optimization of the Clutch Lever Manufactured by Additive Manufacturing. Materials (Basel, Switzerland) 16 (9) (2023)
Aleksandra Mikulikova, Jakub Měsíček, Jan Karger, Jiří Hajnyš, Quoc-Phu Ma, Aleš Slíva, Jakub Smiraus, David Srnicek, Samuel Cienciala, Marek Pagac
Topology Optimization of the Clutch Lever Manufactured by Additive Manufacturing. Materials (Basel, Switzerland) 16 (9) (2023)
Lucie Zárybnická, Jana Petrů, Pavel Krpec, Marek Pagac
Effect of Additives and Print Orientation on the Properties of Laser Sintering-Printed Polyamide 12 Components. Polymers 14 (6) (2022)
David Schwarz, Marek Pagac, Josef Petrus, Stanislav Polzer
Effect of Water-Induced and Physical Aging on Mechanical Properties of 3D Printed Elastomeric Polyurethane. Polymers 14 (24) (2022)
David Schwarz, Marek Pagac, Josef Petrus, Stanislav Polzer
Effect of Water-Induced and Physical Aging on Mechanical Properties of 3D Printed Elastomeric Polyurethane. Polymers 14 (24) (2022)
Michal Šofer, Pavel Šofer, Marek Pagac, Anastasia Volodarskaja, Marek Babiuch, Filip Gruň
Acoustic Emission Signal Characterisation of Failure Mechanisms in CFRP Composites Using Dual-Sensor Approach and Spectral Clustering Technique. Polymers 15 (1) (2022)
David Schwarz, Marek Pagac, Josef Petrus, Stanislav Polzer
Effect of Water-Induced and Physical Aging on Mechanical Properties of 3D Printed Elastomeric Polyurethane. Polymers 14 (24) (2022)
Muhammad Adnan Munir, Muhammad Yasin Naz, Shazia Shukrullah, Muhammad Tamoor Ansar, Muhammad Umar Farooq, Muhammad Irfan, Salim Nasar Faraj Mursal, Stanislaw Legutko, Jana Petrů, Marek Pagac
Enhancement of Magnetic and Dielectric Properties of Ni 0.25 Cu 0.25 Zn 0.50 Fe 2 O 4 Magnetic Nanoparticles through Non-Thermal Microwave Plasma Treatment for High-Frequency and Energy Storage Applications. Materials (Basel, Switzerland) 15 (19) (2022)
David Schwarz, Marek Pagac, Josef Petrus, Stanislav Polzer
Effect of Water-Induced and Physical Aging on Mechanical Properties of 3D Printed Elastomeric Polyurethane. Polymers 14 (24) (2022)
Michal Šofer, Pavel Šofer, Marek Pagac, Anastasia Volodarskaja, Marek Babiuch, Filip Gruň
Acoustic Emission Signal Characterisation of Failure Mechanisms in CFRP Composites Using Dual-Sensor Approach and Spectral Clustering Technique. Polymers 15 (1) (2022)
Quoc-Phu Ma, Jakub Měsíček, František Fojtík, Jiří Hajnyš, Pavel Krpec, Marek Pagac, Jana Petrů
Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method. Materials (Basel, Switzerland) 15 (17) (2022)
Michal Šofer, Pavel Šofer, Marek Pagac, Anastasia Volodarskaja, Marek Babiuch, Filip Gruň
Acoustic Emission Signal Characterisation of Failure Mechanisms in CFRP Composites Using Dual-Sensor Approach and Spectral Clustering Technique. Polymers 15 (1) (2022)
Muhammad Irfan, Humaira Hussain, Bisma Saleem, Muhammad Saleem, Shazia Shukrullah, Stanislaw Legutko, Jana Petrů, Muhammad Yasin Naz, Marek Pagac, Saifur Rahman, Rehan Khan
Evaluation of Ultrasonically ZnO Loading Effect on Photocatalytic Self-Cleaning, UV Protection and Antibacterial Activity of Plasma/Citric Acid-Activated Cotton Fabric. Nanomaterials (Basel, Switzerland) 12 (12) (2022)
Zbigniew Brytan, Mariusz Król, Marcin Benedyk, Wojciech Pakieła, Tomasz Tański, Mengistu Jemberu Dagnaw, Przemysław Snopiński, Marek Pagac, Adam Czech
Microstructural and Mechanical Properties of Novel Co-Free Maraging Steel M789 Prepared by Additive Manufacturing. Materials (Basel, Switzerland) 15 (5) (2022)
Adam Gnatowski, Rafał Gołębski, Jana Petrů, Marek Pagac
Analysis of Thermomechanical Properties and the Influence of Machining Process on the Surface Structure of Composites Manufactured from Metal Chips with a Polymer Matrix. Polymers 14 (17) (2022)
Martina Kalova, Sona Rusnakova, David Krzikalla, Jakub Měsíček, Radek Tomasek, Adela Podeprelova, Jiri Rosicky, Marek Pagac
3D Printed Hollow Off-Axis Profiles Based on Carbon Fiber-Reinforced Polymers: Mechanical Testing and Finite Element Method Analysis. Polymers 13 (17) (2021)
Jana Petrů, Marek Pagac, Martin Grepl
Laser Beam Drilling of Inconel 718 and Its Effect on Mechanical Properties Determined by Static Uniaxial Tensile Testing at Room and Elevated Temperatures. Materials (Basel, Switzerland) 14 (11) (2021)
Marek Pagac, Jiří Hajnyš, Quoc-Phu Ma, Lukas Jancar, Jan Jansa, Petr Stefek, Jakub Měsíček
A Review of Vat Photopolymerization Technology: Materials, Applications, Challenges, and Future Trends of 3D Printing. Polymers 13 (4) (2021)
Jiří Hajnyš, Marek Pagac, Jakub Měsíček, Jana Petrů, Mariusz Król
Influence of Scanning Strategy Parameters on Residual Stress in the SLM Process According to the Bridge Curvature Method for AISI 316L Stainless Steel. Materials (Basel, Switzerland) 13 (7) (2020)
Mariusz Król, Przemysław Snopiński, Jiří Hajnyš, Marek Pagac, Dariusz Łukowiec
Selective Laser Melting of 18NI-300 Maraging Steel. Materials (Basel, Switzerland) 13 (19) (2020)
Michal Kořínek, Radim Halama, František Fojtík, Marek Pagac, Jiří Krček, David Krzikalla, Radim Kocich, Lenka Kunčická
Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens Produced by SLM Technology from SS316L. Materials (Basel, Switzerland) 14 (1) (2020)
Josef Hlinka, Martin Kraus, Jiri Hajnys, Marek Pagac, Jana Petrů, Zbigniew Brytan, Tomasz Tański
Complex Corrosion Properties of AISI 316L Steel Prepared by 3D Printing Technology for Possible Implant Applications. Materials (Basel, Switzerland) 13 (7) (2020)
Mariusz Król, Przemysław Snopiński, Marek Pagac, Jiří Hajnyš, Jana Petrů
Hot Deformation Treatment of Grain-Modified Mg-Li Alloy. Materials (Basel, Switzerland) 13 (20) (2020)