Juan López-Martínez (Juan López-Martinez)

ResearcherID ORCID

Publication Activity (10 Years)

Years Active: 2019-2024
Publications (10 Years): 16

Top Venues

Polymers

Materials (Basel, Switzerland)

Molecules (Basel, Switzerland)

Foods (Basel, Switzerland)

Universitat Politècnica de València

This page only lists publications with an associated author ORCID identifier.

Affiliation History

Universitat Politècnica de València May 12 2008

Spain

Full Professor :: Ingenieria Mecanica y Materiales

Publications

Jerónimo Agrisuelas, Rafael Balart-Gimeno, José Juan García-Jareño, Juan López-Martínez, Francisco Vicente
A Macroscopic Interpretation of the Correlation between Electrical Percolation and Mechanical Properties of Poly-(Ethylene Vinyl Acetate)/Zn Composites. Materials (Basel, Switzerland) 17 (11) (2024)
Jerónimo Agrisuelas, Rafael Balart-Gimeno, José Juan García-Jareño, Juan López-Martínez, Francisco Vicente
A Macroscopic Interpretation of the Correlation between Electrical Percolation and Mechanical Properties of Poly-(Ethylene Vinyl Acetate)/Zn Composites. Materials (Basel, Switzerland) 17 (11) (2024)
Hernández Fernández Joaquin, Rodrigo Ortega-Toro, Juan López-Martínez
A New Route of Valorization of Petrochemical Wastewater: Recovery of 1,3,5-Tris (4-tert-butyl-3-hydroxy-2,6-dimethyl benzyl)-1,3,5-triazine-2,4,6-(1H,3H,5H)-trione (Cyanox 1790) and Its Subsequent Application in a PP Matrix to Improve Its Thermal Stability. Molecules (Basel, Switzerland) 28 (5) (2023)
Federico Barrino, Harrison de la Rosa-Ramírez, Chiara Schiraldi, Juan López-Martínez, Maria Dolores Samper
Preparation and Characterization of New Bioplastics Based on Polybutylene Succinate (PBS). Polymers 15 (5) (2023)
Hernández Fernández Joaquin, Rodrigo Ortega-Toro, Juan López-Martínez
A New Route of Valorization of Petrochemical Wastewater: Recovery of 1,3,5-Tris (4-tert-butyl-3-hydroxy-2,6-dimethyl benzyl)-1,3,5-triazine-2,4,6-(1H,3H,5H)-trione (Cyanox 1790) and Its Subsequent Application in a PP Matrix to Improve Its Thermal Stability. Molecules (Basel, Switzerland) 28 (5) (2023)
Federico Barrino, Harrison de la Rosa-Ramírez, Chiara Schiraldi, Juan López-Martínez, Maria Dolores Samper
Preparation and Characterization of New Bioplastics Based on Polybutylene Succinate (PBS). Polymers 15 (5) (2023)
Andrea Juan-Polo, Cristina Pavon, Harrison de la Rosa-Ramírez, Juan López-Martínez
Use of Raw Peach Gum as a Sustainable Additive for the Development of Water-Sensitive and Biodegradable Thermoplastic Starch Films. Polymers 15 (16) (2023)
Cristina Pavon, Miguel Aldas, Maria Dolores Samper, Dana Luca Motoc, Santiago Ferrándiz-Bou, Juan López-Martínez
Mechanical, Dynamic-Mechanical, Thermal and Decomposition Behavior of 3D-Printed PLA Reinforced with CaCO 3 Fillers from Natural Resources. Polymers 14 (13) (2022)
Cristina Pavon, Miguel Aldas, Juan López-Martínez, Joaquín Hernández-Fernández, Marina Patricia Arrieta
Films Based on Thermoplastic Starch Blended with Pine Resin Derivatives for Food Packaging. Foods (Basel, Switzerland) 10 (6) (2021)
Miguel Aldas, Jose Miguel Ferri, Dana Luca Motoc, Laura Peponi, Marina Patricia Arrieta, Juan López-Martínez
Gum Rosin as a Size Control Agent of Poly(Butylene Adipate-Co-Terephthalate) (PBAT) Domains to Increase the Toughness of Packaging Formulations Based on Polylactic Acid (PLA). Polymers 13 (12) (2021)
Miguel Aldas, Cristina Pavon, Jose Miguel Ferri, Marina Patricia Arrieta, Juan López-Martínez
Films Based on Mater-Bi® Compatibilized with Pine Resin Derivatives: Optical, Barrier, and Disintegration Properties. Polymers 13 (9) (2021)
Francesca Luzi, Maria Dolores Samper, Alfredo Carbonell-Verdu, Francesca Luzi, Juan López-Martínez, Luigi Torre, Debora Puglia
Improved Toughness in Lignin/Natural Fiber Composites Plasticized with Epoxidized and Maleinized Linseed Oils. Materials (Basel, Switzerland) 13 (3) (2020)
Franciszek Pawlak, Miguel Aldas, Francisco Parres, Juan López-Martínez, Marina Patricia Arrieta
Silane-Functionalized Sheep Wool Fibers from Dairy Industry Waste for the Development of Plasticized PLA Composites with Maleinized Linseed Oil for Injection-Molded Parts. Polymers 12 (11) (2020)
Miguel Aldas, Emilio Rayón, Juan López-Martínez, Marina Patricia Arrieta
A Deeper Microscopic Study of the Interaction between Gum Rosin Derivatives and a Mater-Bi Type Bioplastic. Polymers 12 (1) (2020)
Cristina Pavon, Miguel Aldas, Juan López-Martínez, Santiago Ferrándiz-Bou
New Materials for 3D-Printing Based on Polycaprolactone with Gum Rosin and Beeswax as Additives. Polymers 12 (2) (2020)
Franciszek Pawlak, Miguel Aldas, Juan López-Martínez, Maria Dolores Samper
Effect of Different Compatibilizers on Injection-Molded Green Fiber-Reinforced Polymers Based on Poly(lactic acid)-Maleinized Linseed Oil System and Sheep Wool. Polymers 11 (9) (2019)

Juan López-Martínez.css-eqlu8i{font-size:small;padding-left:4px;} (Juan López-Martinez)

Publication Activity (10 Years)

Top Topics

Top Venues

Juan López-Martínez (Juan López-Martinez)