Mohamed M Z Ahmed

Publication Activity (10 Years)

Years Active: 2021-2024
Publications (10 Years): 46

Top Topics

Infectious Diseases

Atomic Force Microscopy

Top Venues

Materials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Ahmed R S Essa, Ramy I A Eldersy, Mohamed M Z Ahmed, Ali Abd El-Aty, Ali Alamry, Bandar Alzahrani, Ahmed E El-Nikhaily, Mohamed I A Habba
Modeling and Experimental Investigation of the Impact of the Hemispherical Tool on Heat Generation and Tensile Properties of Dissimilar Friction Stir Welded AA5083 and AA7075 Al Alloys. Materials (Basel, Switzerland) 17 (2) (2024)
Ali Abd El-Aty, Yong Xu, Yong Hou, Shi-Hong Zhang, Sangyul Ha, Liangliang Xia, Bandar Alzahrani, Alamry Ali, Mohamed M Z Ahmed, Abdallah Shokry
Modelling the Flow Behaviour of Al Alloy Sheets at Elevated Temperatures Using a Modified Zerilli-Armstrong Model and Phenomenological-Based Constitutive Models. Materials (Basel, Switzerland) 17 (7) (2024)
Ahmed R S Essa, Ramy I A Eldersy, Mohamed M Z Ahmed, Ali Abd El-Aty, Ali Alamry, Bandar Alzahrani, Ahmed E El-Nikhaily, Mohamed I A Habba
Modeling and Experimental Investigation of the Impact of the Hemispherical Tool on Heat Generation and Tensile Properties of Dissimilar Friction Stir Welded AA5083 and AA7075 Al Alloys. Materials (Basel, Switzerland) 17 (2) (2024)
Ali Abd El-Aty, Yong Xu, Yong Hou, Shi-Hong Zhang, Sangyul Ha, Liangliang Xia, Bandar Alzahrani, Alamry Ali, Mohamed M Z Ahmed, Abdallah Shokry
Modelling the Flow Behaviour of Al Alloy Sheets at Elevated Temperatures Using a Modified Zerilli-Armstrong Model and Phenomenological-Based Constitutive Models. Materials (Basel, Switzerland) 17 (7) (2024)
Ali Abd El-Aty, Sangyul Ha, Yong Xu, Yong Hou, Shi-Hong Zhang, Bandar Alzahrani, Alamry Ali, Mohamed M Z Ahmed
Coupling Computational Homogenization with Crystal Plasticity Modelling for Predicting the Warm Deformation Behaviour of AA2060-T8 Al-Li Alloy. Materials (Basel, Switzerland) 16 (11) (2023)
Mohamed M Z Ahmed, Ahmed R S Essa, Sabbah Ataya, Mohamed M El-Sayed Seleman, Ali Abd El-Aty, Bandar Alzahrani, Kamel Touileb, Ashraf Bakkar, Joffin J Ponnore, Abdelkarim Yousif Mohamed
Friction Stir Welding of AA5754-H24: Impact of Tool Pin Eccentricity and Welding Speed on Grain Structure, Crystallographic Texture, and Mechanical Properties. Materials (Basel, Switzerland) 16 (5) (2023)
Alessandro Abena, Sein Leung Soo, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed M Z Ahmed, Khamis Essa
Chip Formation and Orthogonal Cutting Optimisation of Unidirectional Carbon Fibre Composites. Polymers 15 (8) (2023)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Dariusz Fydrych, Gürel Çam
Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review. Materials (Basel, Switzerland) 16 (8) (2023)
Alessandro Abena, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed M Z Ahmed, Khamis Essa
Hybrid Finite Element-Smoothed Particle Hydrodynamics Modelling for Optimizing Cutting Parameters in CFRP Composites. Polymers 15 (13) (2023)
Ahmed R S Essa, Mohamed M Z Ahmed, Aboud R K Aboud, Rakan Alyamani, Tamer Ali Sebeay
Prediction of Tool Eccentricity Effects on the Mechanical Properties of Friction Stir Welded AA5754-H24 Aluminum Alloy Using ANN Model. Materials (Basel, Switzerland) 16 (10) (2023)
Naser A Alsaleh, Mohamed M El-Sayed Seleman, Ahmed M M Hassan, Mohamed M Z Ahmed, Sabbah Ataya, Fahamsyah H Latief, Akrum Abdul-Latif, Mohamed I A Habba
Additively Manufactured Parts from AA2011-T6 Large-Diameter Feedstocks Using Friction Stir Deposition. Materials (Basel, Switzerland) 16 (14) (2023)
Mohamed I A Habba, Naser A Alsaleh, Takwa E Badran, Mohamed M El-Sayed Seleman, Sabbah Ataya, Ahmed E El-Nikhaily, Akrum Abdul-Latif, Mohamed M Z Ahmed
Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect. Materials (Basel, Switzerland) 16 (14) (2023)
Ali Abd El-Aty, Yong Xu, Wenlong Xie, Liang-Liang Xia, Yong Hou, Shi-Hong Zhang, Mohamed M Z Ahmed, Bandar Alzahrani, Alamry Ali, Xinyue Huang, Arafa S Sobh
Finite Element Analysis and Experimental Study of Manufacturing Thin-Walled Five-Branched AISI 304 Stainless Steel Tubes with Different Diameters Using a Hydroforming Process. Materials (Basel, Switzerland) 17 (1) (2023)
Ali Abd El-Aty, Cheng Cheng, Yong Xu, Yong Hou, Jie Tao, Shenghan Hu, Bandar Alzahrani, Alamry Ali, Mohamed M Z Ahmed, Xunzhong Guo
Modeling and Experimental Investigation of U-R Relationship of AA6061-T6 Tubes Manufactured via Free Bending Forming Process. Materials (Basel, Switzerland) 16 (23) (2023)
Alessandro Abena, Sein Leung Soo, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed M Z Ahmed, Khamis Essa
Chip Formation and Orthogonal Cutting Optimisation of Unidirectional Carbon Fibre Composites. Polymers 15 (8) (2023)
Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Sabbah Ataya, Mohamed M Z Ahmed, Khamis Essa
Optimising Surface Roughness and Density in Titanium Fabrication via Laser Powder Bed Fusion. Micromachines 14 (8) (2023)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Ibrahim Albaijan, Ali Abd El-Aty
Microstructure, Texture, and Mechanical Properties of Friction Stir Spot-Welded AA5052-H32: Influence of Tool Rotation Rate. Materials (Basel, Switzerland) 16 (9) (2023)
Ali Abd El-Aty, Yong Xu, Wenlong Xie, Liang-Liang Xia, Yong Hou, Shi-Hong Zhang, Mohamed M Z Ahmed, Bandar Alzahrani, Alamry Ali, Xinyue Huang, Arafa S Sobh
Finite Element Analysis and Experimental Study of Manufacturing Thin-Walled Five-Branched AISI 304 Stainless Steel Tubes with Different Diameters Using a Hydroforming Process. Materials (Basel, Switzerland) 17 (1) (2023)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Dariusz Fydrych, Gürel Çam
Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review. Materials (Basel, Switzerland) 16 (8) (2023)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Ibrahim Albaijan, Ali Abd El-Aty
Microstructure, Texture, and Mechanical Properties of Friction Stir Spot-Welded AA5052-H32: Influence of Tool Rotation Rate. Materials (Basel, Switzerland) 16 (9) (2023)
Alessandro Abena, Sein Leung Soo, Sabbah Ataya, Hany Hassanin, Mahmoud Ahmed El-Sayed, Mahmoud Ahmadein, Naser A Alsaleh, Mohamed M Z Ahmed, Khamis Essa
Chip Formation and Orthogonal Cutting Optimisation of Unidirectional Carbon Fibre Composites. Polymers 15 (8) (2023)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Asmaa M El-Sayed Sobih, Ashraf Bakkar, Ibrahim Albaijan, Kamel Touileb, Ali Abd El-Aty
Friction Stir-Spot Welding of AA5052-H32 Alloy Sheets: Effects of Dwell Time on Mechanical Properties and Microstructural Evolution. Materials (Basel, Switzerland) 16 (7) (2023)
Nashmi H Alrasheedi, Sabbah Ataya, Mohamed M El-Sayed Seleman, Mohamed M Z Ahmed
Tensile Deformation and Fracture of Unreinforced AZ91 and Reinforced AZ91-C at Temperatures up to 300 °C. Materials (Basel, Switzerland) 16 (13) (2023)
Hayam A Aly, Mohamed M El-Sayed Seleman, Ashraf Bakkar, Ibrahim Albaijan, Mohamed M Z Ahmed, Khaled M Ibrahim
Effect of Si Content on the Thermal Expansion of Ti15Mo(0-2 Si) Biomaterial Alloys during Different Heating Rates. Materials (Basel, Switzerland) 16 (13) (2023)
Mohamed M Z Ahmed, Ahmed R S Essa, Sabbah Ataya, Mohamed M El-Sayed Seleman, Ali Abd El-Aty, Bandar Alzahrani, Kamel Touileb, Ashraf Bakkar, Joffin J Ponnore, Abdelkarim Yousif Mohamed
Friction Stir Welding of AA5754-H24: Impact of Tool Pin Eccentricity and Welding Speed on Grain Structure, Crystallographic Texture, and Mechanical Properties. Materials (Basel, Switzerland) 16 (5) (2023)
Naser A Alsaleh, Sabbah Ataya, Fahamsyah H Latief, Mohamed M Z Ahmed, Ahmed Ataya, Akrum Abdul-Latif
LCF and HCF of Short Carbon Fibers Reinforced AE42 Mg Alloy. Materials (Basel, Switzerland) 16 (10) (2023)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Dariusz Fydrych, Gürel Çam
Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review. Materials (Basel, Switzerland) 16 (8) (2023)
Sabbah Ataya, Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Fahamsyah H Latief, Ahmed M Soliman, Yousef G Y Elshaghoul, Mohamed I A Habba
Effective Range of FSSW Parameters for High Load-Carrying Capacity of Dissimilar Steel A283M-C/Brass CuZn40 Joints. Materials (Basel, Switzerland) 15 (4) (2022)
Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed M Z Ahmed, Khalil Hajlaoui, Yousef G Y Elshaghoul, Mohamed I A Habba
Microstructure and Mechanical Properties of AZ91 Rein-Forced with High Volume Fraction of Oriented Short Carbon Fibers. Materials (Basel, Switzerland) 15 (14) (2022)
Mohamed M El-Sayed Seleman, Sabbah Ataya, Mohamed M Z Ahmed, Ahmed M M Hassan, Fahamsyah H Latief, Khalil Hajlaoui, Ahmed E El-Nikhaily, Mohamed I A Habba
The Additive Manufacturing of Aluminum Matrix Nano Al 2 O 3 Composites Produced via Friction Stir Deposition Using Different Initial Material Conditions. Materials (Basel, Switzerland) 15 (8) (2022)
Mohamed M Z Ahmed, Kamel Touileb, Mohamed M El-Sayed Seleman, Ibrahim Albaijan, Mohamed I A Habba
Bobbin Tool Friction Stir Welding of Aluminum: Parameters Optimization Using Taguchi Experimental Design. Materials (Basel, Switzerland) 15 (8) (2022)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Rana G Eid, Ibrahim Albaijan, Kamel Touileb
The Influence of Tool Pin Geometry and Speed on the Mechanical Properties of the Bobbin Tool Friction Stir Processed AA1050. Materials (Basel, Switzerland) 15 (13) (2022)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Essam Ahmed, Hagar A Reyad, Kamel Touileb, Ibrahim Albaijan
Friction Stir Spot Welding of Different Thickness Sheets of Aluminum Alloy AA6082-T6. Materials (Basel, Switzerland) 15 (9) (2022)
Ibrahim Albaijan, Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Kamel Touileb, Mohamed I A Habba, Ramy A Fouad
Optimization of Bobbin Tool Friction Stir Processing Parameters of AA1050 Using Response Surface Methodology. Materials (Basel, Switzerland) 15 (19) (2022)
Kawkb M El-Tamimi, Dalia A Bayoumi, Mohamed M Z Ahmed, Ibrahim Albaijan, Mohammed E El-Sayed
The Effect of Salinized Nano ZrO 2 Particles on the Microstructure, Hardness, and Wear Behavior of Acrylic Denture Tooth Nanocomposite. Polymers 14 (2) (2022)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Essam Ahmed, Hagar A Reyad, Naser A Alsaleh, Ibrahim Albaijan
A Novel Friction Stir Deposition Technique to Refill Keyhole of Friction Stir Spot Welded AA6082-T6 Dissimilar Joints of Different Sheet Thicknesses. Materials (Basel, Switzerland) 15 (19) (2022)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Kamel Touileb, Ibrahim Albaijan, Mohamed I A Habba
Microstructure, Crystallographic Texture, and Mechanical Properties of Friction Stir Welded Mild Steel for Shipbuilding Applications. Materials (Basel, Switzerland) 15 (8) (2022)
Kamel Touileb, Abdeljlil Chihaoui Hedhibi, Rachid Djoudjou, Abousoufiane Ouis, Abdallah Bensalama, Albaijan Ibrahim, Hany Sayed Abdo, Mohamed M Z Ahmed
Mechanical, Microstructure, and Corrosion Characterization of Dissimilar Austenitic 316L and Duplex 2205 Stainless-Steel ATIG Welded Joints. Materials (Basel, Switzerland) 15 (7) (2022)
Sabbah Ataya, Mohamed M El-Sayed Seleman, Fahamsyah H Latief, Mohamed M Z Ahmed, Khalil Hajlaoui, Ahmed M Soliman, Naser A Alsaleh, Mohamed I A Habba
Wear Characteristics of Mg Alloy AZ91 Reinforced with Oriented Short Carbon Fibers. Materials (Basel, Switzerland) 15 (14) (2022)
Abdeljlil Chihaoui Hedhibi, Kamel Touileb, Rachid Djoudjou, Abousoufiane Ouis, Hussein Alrobei, Mohamed M Z Ahmed
Mechanical Properties and Microstructure of TIG and ATIG Welded 316L Austenitic Stainless Steel with Multi-Components Flux Optimization Using Mixing Design Method and Particle Swarm Optimization (PSO). Materials (Basel, Switzerland) 14 (23) (2021)
Bandar Alzahrani, Mohamed M El-Sayed Seleman, Mohamed M Z Ahmed, Ebtessam Elfishawy, Adham M Z Ahmed, Kamel Touileb, Nabil Jouini, Mohamed I A Habba
The Applicability of Die Cast A356 Alloy to Additive Friction Stir Deposition at Various Feeding Speeds. Materials (Basel, Switzerland) 14 (20) (2021)
Mohamed M Z Ahmed, Khalil Hajlaoui, Mohamed M El-Sayed Seleman, Mahmoud F Elkady, Sabbah Ataya, Fahamsyah H Latief, Mohamed I A Habba
Microstructure and Mechanical Properties of Friction Stir Welded 2205 Duplex Stainless Steel Butt Joints. Materials (Basel, Switzerland) 14 (21) (2021)
Mohamed M Z Ahmed, Khaled A Abdelazem, Mohamed M El-Sayed Seleman, Bandar Alzahrani, Kamel Touileb, Nabil Jouini, Ismail G El-Batanony, Hussein M Abd El-Aziz
Friction Stir Welding of 2205 Duplex Stainless Steel: Feasibility of Butt Joint Groove Filling in Comparison to Gas Tungsten Arc Welding. Materials (Basel, Switzerland) 14 (16) (2021)
Mohamed M Z Ahmed, Bandar Alzahrani, Nabil Jouini, Mahmoud M Hessien, Sabbah Ataya
The Role of Orientation and Temperature on the Mechanical Properties of a 20 Years Old Wind Turbine Blade GFR Composite. Polymers 13 (7) (2021)
Mohamed M Z Ahmed, Mohamed M El-Sayed Seleman, Ebtessam Elfishawy, Bandar Alzahrani, Kamel Touileb, Mohamed I A Habba
The Effect of Temper Condition and Feeding Speed on the Additive Manufacturing of AA2011 Parts Using Friction Stir Deposition. Materials (Basel, Switzerland) 14 (21) (2021)
Mohamed M Z Ahmed, Mohamed I A Habba, Mohamed M El-Sayed Seleman, Khalil Hajlaoui, Sabbah Ataya, Fahamsyah H Latief, Ahmed E El-Nikhaily
Bobbin Tool Friction Stir Welding of Aluminum Thick Lap Joints: Effect of Process Parameters on Temperature Distribution and Joints' Properties. Materials (Basel, Switzerland) 14 (16) (2021)