Preparation of 3D printed Calcium sulfate filled PLA scaffolds with improved mechanical and degradation properties.

Scaffold is one of the key components for tissue engineering application.3D printing has given new avenue to the scaffolds design to closely mimic the real tissue. However, material selection has always been a challenge in adopting 3D printing for scaffolds fabrication, especially for hard tissue. Fused filament fabrication technique (FFF) is one of the economical 3D printing technology available today, which can efficiently fabricate the scaffolds with its key features. In the present study, hybrid polymer-ceramic scaffold has been prepared by combining the benefit of synthetic biodegradable poly (lactic acid) (PLA) and osteoconductive Calcium sulphate (CaS), to harness the advantage of both the materials. Composite PLA filament with maximum ceramic loading of 40 wt% was investigated for its printability and subsequently scaffolds were 3D printed. The composite filament was extruded at a temperature of 160 °C at a constant speed with average diameter of 1.66 ± 0.34mm. PLA-CaS scaffold with ceramic content of 10%, 20% and 40% was 3D printed with square pore geometry. The developed scaffolds were characterized for its thermal stability, mechanical, morphological, and geometrical accuracy. The mechanical strength was improved by 29% at 20wt% of CaS. The porosity was found to be 50-60% with average pore size of 550 µm with well interconnected pores. Effect of CaS particles on degradation behaviour of scaffolds was also assessed over an incubation period of 28 days. The CaS particles acted as porogen and improved the surface chemistry for future cellular activity, while accelerating the degradation rate.