Oleogel formulation using lipophilic sea buckthorn extract isolated from pomace with supercritical CO2.
Viktorija EisinaitėRimantė VinauskienėMichail SyrpasPetras Rimantas VenskutonisDaiva LeskauskaitePublished in: Journal of texture studies (2021)
Lipophilic sea buckthorn pomace extract isolated by supercritical CO2 (LSBPE) was structurized with different amounts of carnauba wax or beeswax as oleogelators. Oleogels were also made with added water at an LSBPE:water ratio of 70:30. LSBPE was characterized by a favorable ratio of omega-6 to omega-3 fatty acids (1:3) and reasonable amounts of omega-7 fatty acids (4.45% of total), tocopherols (63.0 mg/100 g) and carotenoids (700.1 mg/100 g). The oleogels were characterized by their structural and rheological properties, and physical and chemical stability during storage. Carnauba wax produced a gel-like structure with a highly condensed network of aggregated crystals, while beeswax oleogels displayed elongated crystals which formed interconnected networks. Carnauba wax gels were harder than beeswax gels with better oil-binding capacity and higher crystallization and melting temperatures. Both oleogels showed good physical and oxidative stability during storage due to the immobilization of oil in the three-dimensional structures, and the presence of strong lipophilic antioxidants in LSBPE, respectively. As the proportion of waxes increased from 5 to 17.5%, the hardness, oil-binding capacity, crystallization, and melting temperatures increased in both gels due to the more developed crystalline associations. Addition of water had no significant effect on the physical and chemical stability of oleogels during storage. Water was distributed as small droplets in the crystalline network of oleogelators. However, hardness and oil-binding capacity decreased as water was added. Rich in polyunsaturated fatty acids and bioactive compounds, LSBPE oleogels offer the opportunity to deliver bioactives while simultaneously acting as fat substitutes.