Tomasz Trzepiecinski (Tomasz Trzepieciński)

ResearcherID Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2019-2023
Publications (10 Years): 62

Top Topics

Ankylosing Spondylitis

Finite Element Analysis

High Resolution

Top Venues

Materials (Basel, Switzerland)

This page only lists publications with an associated author ORCID identifier.

Publications

Krzysztof Żaba, Tomasz Trzepiecinski
Cold Drawing of AISI 321 Stainless Steel Thin-Walled Seamless Tubes on a Floating Plug. Materials (Basel, Switzerland) 16 (16) (2023)
Krzysztof Szwajka, Joanna Zielińska-Szwajka, Tomasz Trzepiecinski
Microstructure and Mechanical Properties of Solid-State Rotary Friction Welded Inconel 713C and 32CrMo4 Steel Joints Used in a Turbocharger Rotor. Materials (Basel, Switzerland) 16 (6) (2023)
Krzysztof Szwajka, Joanna Zielińska-Szwajka, Tomasz Trzepiecinski
Microstructure and Mechanical Properties of Solid-State Rotary Friction Welded Inconel 713C and 32CrMo4 Steel Joints Used in a Turbocharger Rotor. Materials (Basel, Switzerland) 16 (6) (2023)
Tomasz Trzepiecinski, Ján Slota, Ľuboš Kaščák, Ivan Gajdoš, Marek Vojtko
Friction Behaviour of 6082-T6 Aluminium Alloy Sheets in a Strip Draw Tribological Test. Materials (Basel, Switzerland) 16 (6) (2023)
Nicolae Rosca, Mihaela Oleksik, Liviu Rosca, Eugen Avrigean, Tomasz Trzepiecinski, Sherwan Mohammed Najm, Valentin Oleksik
Minimizing the Main Strains and Thickness Reduction in the Single Point Incremental Forming Process of Polyamide and High-Density Polyethylene Sheets. Materials (Basel, Switzerland) 16 (4) (2023)
Tomasz Trzepiecinski, Ján Slota, Ľuboš Kaščák, Ivan Gajdoš, Marek Vojtko
Friction Behaviour of 6082-T6 Aluminium Alloy Sheets in a Strip Draw Tribological Test. Materials (Basel, Switzerland) 16 (6) (2023)
Krzysztof Szwajka, Joanna Zielińska-Szwajka, Tomasz Trzepiecinski
Microstructure and Mechanical Properties of Solid-State Rotary Friction Welded Inconel 713C and 32CrMo4 Steel Joints Used in a Turbocharger Rotor. Materials (Basel, Switzerland) 16 (6) (2023)
Kamil Czapla, Krzysztof Żaba, Marcin Kot, Ilona Nejman, Marcin Madej, Tomasz Trzepiecinski
Tribological Performance of Anti-Wear Coatings on Tools for Forming Aluminium Alloy Sheets Used for Producing Pull-Off Caps. Materials (Basel, Switzerland) 16 (19) (2023)
Krzysztof Szwajka, Joanna Zielińska-Szwajka, Tomasz Trzepiecinski
Improving the Surface Integrity of 316L Steel in the Context of Bioimplant Applications. Materials (Basel, Switzerland) 16 (9) (2023)
Nicolae Rosca, Mihaela Oleksik, Liviu Rosca, Eugen Avrigean, Tomasz Trzepiecinski, Sherwan Mohammed Najm, Valentin Oleksik
Minimizing the Main Strains and Thickness Reduction in the Single Point Incremental Forming Process of Polyamide and High-Density Polyethylene Sheets. Materials (Basel, Switzerland) 16 (4) (2023)
Nicolae Rosca, Mihaela Oleksik, Liviu Rosca, Eugen Avrigean, Tomasz Trzepiecinski, Sherwan Mohammed Najm, Valentin Oleksik
Minimizing the Main Strains and Thickness Reduction in the Single Point Incremental Forming Process of Polyamide and High-Density Polyethylene Sheets. Materials (Basel, Switzerland) 16 (4) (2023)
Krzysztof Szwajka, Joanna Zielińska-Szwajka, Tomasz Trzepiecinski
The Use of a Radial Basis Function Neural Network and Fuzzy Modelling in the Assessment of Surface Roughness in the MDF Milling Process. Materials (Basel, Switzerland) 16 (15) (2023)
Tomasz Trzepiecinski, Sherwan Mohammed Najm, Omar Maghawry Ibrahim, Marek Kowalik
Analysis of the Frictional Performance of AW-5251 Aluminium Alloy Sheets Using the Random Forest Machine Learning Algorithm and Multilayer Perceptron. Materials (Basel, Switzerland) 16 (15) (2023)
Krzysztof Szwajka, Joanna Zielińska-Szwajka, Tomasz Trzepiecinski
Improving the Surface Integrity of 316L Steel in the Context of Bioimplant Applications. Materials (Basel, Switzerland) 16 (9) (2023)
Nicolae Rosca, Mihaela Oleksik, Liviu Rosca, Eugen Avrigean, Tomasz Trzepiecinski, Sherwan Mohammed Najm, Valentin Oleksik
Minimizing the Main Strains and Thickness Reduction in the Single Point Incremental Forming Process of Polyamide and High-Density Polyethylene Sheets. Materials (Basel, Switzerland) 16 (4) (2023)
Tomasz Trzepiecinski, Ján Slota, Ľuboš Kaščák, Ivan Gajdoš, Marek Vojtko
Friction Behaviour of 6082-T6 Aluminium Alloy Sheets in a Strip Draw Tribological Test. Materials (Basel, Switzerland) 16 (6) (2023)
Andrzej Kubit, Tomasz Trzepiecinski, Radosław Kiciński, Kamil Jurczak
Three-Dimensional Smooth Particle Hydrodynamics Modeling and Experimental Analysis of the Ballistic Performance of Steel-Based FML Targets. Materials (Basel, Switzerland) 15 (10) (2022)
Krzysztof Żaba, Tomasz Trzepiecinski
The Role of Al-10%Si Coating in the Manufacture and Use of Aluminized Open-Joint Steel Tubes. Materials (Basel, Switzerland) 15 (12) (2022)
Grzegorz Janowski, Wiesław Frącz, Łukasz Bąk, Tomasz Trzepiecinski
The Effect of the Extrusion Method on Processing and Selected Properties of Poly(3-hydroxybutyric-co-3-hydroxyvaleric Acid)-Based Biocomposites with Flax and Hemp Fibers. Polymers 14 (24) (2022)
Wojciech Jurczak, Tomasz Trzepiecinski, Andrzej Kubit, Wojciech Bochnowski
Static and Dynamic Properties of Al-Mg Alloys Subjected to Hydrostatic Extrusion. Materials (Basel, Switzerland) 15 (3) (2022)
Tomasz Trzepiecinski, Sherwan Mohammed Najm
Application of Artificial Neural Networks to the Analysis of Friction Behaviour in a Drawbead Profile in Sheet Metal Forming. Materials (Basel, Switzerland) 15 (24) (2022)
Krzysztof Szwajka, Marek Szewczyk, Tomasz Trzepiecinski
Experimental Compaction of a High-Silica Sand in Quasi-Static Conditions. Materials (Basel, Switzerland) 16 (1) (2022)
Tomasz Trzepiecinski, Sherwan Mohammed Najm
Application of Artificial Neural Networks to the Analysis of Friction Behaviour in a Drawbead Profile in Sheet Metal Forming. Materials (Basel, Switzerland) 15 (24) (2022)
Magdalena Bucior, Rafał Kluz, Tomasz Trzepiecinski, Kamil Jurczak, Andrzej Kubit, Kamil Ochał
The Effect of Shot Peening on Residual Stress and Surface Roughness of AMS 5504 Stainless Steel Joints Welded Using the TIG Method. Materials (Basel, Switzerland) 15 (24) (2022)
Tomasz Trzepiecinski, Sherwan Mohammed Najm
Application of Artificial Neural Networks to the Analysis of Friction Behaviour in a Drawbead Profile in Sheet Metal Forming. Materials (Basel, Switzerland) 15 (24) (2022)
Tomasz Trzepiecinski
Polynomial Multiple Regression Analysis of the Lubrication Effectiveness of Deep Drawing Quality Steel Sheets by Eco-Friendly Vegetable Oils. Materials (Basel, Switzerland) 15 (3) (2022)
Magdalena Bucior, Rafał Kluz, Tomasz Trzepiecinski, Kamil Jurczak, Andrzej Kubit, Kamil Ochał
The Effect of Shot Peening on Residual Stress and Surface Roughness of AMS 5504 Stainless Steel Joints Welded Using the TIG Method. Materials (Basel, Switzerland) 15 (24) (2022)
Krzysztof Szwajka, Marek Szewczyk, Tomasz Trzepiecinski
Experimental Compaction of a High-Silica Sand in Quasi-Static Conditions. Materials (Basel, Switzerland) 16 (1) (2022)
Krzysztof Żaba, Sandra Puchlerska, Łukasz Kuczek, Tomasz Trzepiecinski, Piotr Maj
Effect of Step Size on the Formability of Al/Cu Bimetallic Sheets in Single Point Incremental Sheet Forming. Materials (Basel, Switzerland) 16 (1) (2022)
Krzysztof Żaba, Sandra Puchlerska, Łukasz Kuczek, Tomasz Trzepiecinski, Piotr Maj
Effect of Step Size on the Formability of Al/Cu Bimetallic Sheets in Single Point Incremental Sheet Forming. Materials (Basel, Switzerland) 16 (1) (2022)
Marek Szewczyk, Krzysztof Szwajka, Tomasz Trzepiecinski
Frictional Characteristics of Deep-Drawing Quality Steel Sheets in the Flat Die Strip Drawing Test. Materials (Basel, Switzerland) 15 (15) (2022)
Nicolae Rosca, Tomasz Trzepiecinski, Valentin Oleksik
Minimizing the Forces in the Single Point Incremental Forming Process of Polymeric Materials Using Taguchi Design of Experiments and Analysis of Variance. Materials (Basel, Switzerland) 15 (18) (2022)
Magdalena Bucior, Rafał Kluz, Tomasz Trzepiecinski, Kamil Jurczak, Andrzej Kubit, Kamil Ochał
The Effect of Shot Peening on Residual Stress and Surface Roughness of AMS 5504 Stainless Steel Joints Welded Using the TIG Method. Materials (Basel, Switzerland) 15 (24) (2022)
Tomasz Trzepiecinski, Marcin Szpunar, Andrzej Dzierwa, Krzysztof Żaba
Investigation of Surface Roughness in Incremental Sheet Forming of Conical Drawpieces from Pure Titanium Sheets. Materials (Basel, Switzerland) 15 (12) (2022)
Grzegorz Janowski, Wiesław Frącz, Łukasz Bąk, Tomasz Trzepiecinski
The Effect of the Extrusion Method on Processing and Selected Properties of Poly(3-hydroxybutyric-co-3-hydroxyvaleric Acid)-Based Biocomposites with Flax and Hemp Fibers. Polymers 14 (24) (2022)
Grzegorz Janowski, Wiesław Frącz, Łukasz Bąk, Tomasz Trzepiecinski
The Effect of the Extrusion Method on Processing and Selected Properties of Poly(3-hydroxybutyric-co-3-hydroxyvaleric Acid)-Based Biocomposites with Flax and Hemp Fibers. Polymers 14 (24) (2022)
Krzysztof Żaba, Sandra Puchlerska, Łukasz Kuczek, Tomasz Trzepiecinski, Piotr Maj
Effect of Step Size on the Formability of Al/Cu Bimetallic Sheets in Single Point Incremental Sheet Forming. Materials (Basel, Switzerland) 16 (1) (2022)
Andrzej Kubit, Tomasz Trzepiecinski, Rafał Kluz, Krzysztof Ochałek, Ján Slota
Multi-Criteria Optimisation of Friction Stir Welding Parameters for EN AW-2024-T3 Aluminium Alloy Joints. Materials (Basel, Switzerland) 15 (15) (2022)
Grzegorz Janowski, Wiesław Frącz, Łukasz Bąk, Tomasz Trzepiecinski
The Effect of the Extrusion Method on Processing and Selected Properties of Poly(3-hydroxybutyric-co-3-hydroxyvaleric Acid)-Based Biocomposites with Flax and Hemp Fibers. Polymers 14 (24) (2022)
Krzysztof Szwajka, Marek Szewczyk, Tomasz Trzepiecinski
Experimental Compaction of a High-Silica Sand in Quasi-Static Conditions. Materials (Basel, Switzerland) 16 (1) (2022)
Rafał Kluz, Katarzyna Antosz, Tomasz Trzepiecinski, Magdalena Bucior
Modelling the Influence of Slide Burnishing Parameters on the Surface Roughness of Shafts Made of 42CrMo4 Heat-Treatable Steel. Materials (Basel, Switzerland) 14 (5) (2021)
Marek Kowalik, Tomasz Trzepiecinski, Leon Kukiełka, Piotr Paszta, Paweł Maciąg, Stanislaw Legutko
Experimental and Numerical Analysis of the Depth of the Strengthened Layer on Shafts Resulting from Roller Burnishing with Roller Braking Moment. Materials (Basel, Switzerland) 14 (19) (2021)
Sandra Puchlerska, Krzysztof Żaba, Jarosław Pyzik, Tomasz Pieja, Tomasz Trzepiecinski
Statistical Analysis and Optimisation of Data for the Design and Evaluation of the Shear Spinning Process. Materials (Basel, Switzerland) 14 (20) (2021)
Krzysztof Żaba, Tomasz Trzepiecinski, Stanislav Rusz, Sandra Puchlerska, Maciej Balcerzak
Full-Field Temperature Measurement of Stainless Steel Specimens Subjected to Uniaxial Tensile Loading at Various Strain Rates. Materials (Basel, Switzerland) 14 (18) (2021)
Andrzej Kubit, Tomasz Trzepiecinski, Elżbieta Gadalińska, Ján Slota, Wojciech Bochnowski
Investigation into the Effect of RFSSW Parameters on Tensile Shear Fracture Load of 7075-T6 Alclad Aluminium Alloy Joints. Materials (Basel, Switzerland) 14 (12) (2021)
Sherwan Mohammed Najm, Imre Paniti, Tomasz Trzepiecinski, Sami Ali Nama, Zsolt János Viharos, Adam Jacso
Parametric Effects of Single Point Incremental Forming on Hardness of AA1100 Aluminium Alloy Sheets. Materials (Basel, Switzerland) 14 (23) (2021)
Marcin Szpunar, Robert Ostrowski, Tomasz Trzepiecinski, Ľuboš Kaščák
Central Composite Design Optimisation in Single Point Incremental Forming of Truncated Cones from Commercially Pure Titanium Grade 2 Sheet Metals. Materials (Basel, Switzerland) 14 (13) (2021)
Tomasz Trzepiecinski, Marcin Szpunar, Ľuboš Kaščák
Modeling of Friction Phenomena of Ti-6Al-4V Sheets Based on Backward Elimination Regression and Multi-Layer Artificial Neural Networks. Materials (Basel, Switzerland) 14 (10) (2021)
Marcin Szpunar, Tomasz Trzepiecinski, Krzysztof Żaba, Robert Ostrowski, Marek Zwolak
Effect of Lubricant Type on the Friction Behaviours and Surface Topography in Metal Forming of Ti-6Al-4V Titanium Alloy Sheets. Materials (Basel, Switzerland) 14 (13) (2021)
Krzysztof Żaba, Tomasz Trzepiecinski, Sandra Puchlerska, Piotr Noga, Maciej Balcerzak
Coupled Thermomechanical Response Measurement of Deformation of Nickel-Based Superalloys Using Full-Field Digital Image Correlation and Infrared Thermography. Materials (Basel, Switzerland) 14 (9) (2021)
Ján Slota, Andrzej Kubit, Tomasz Trzepiecinski, Bogdan Krasowski, Ján Varga
Ultimate Load-Carrying Ability of Rib-Stiffened 2024-T3 and 7075-T6 Aluminium Alloy Panels under Axial Compression. Materials (Basel, Switzerland) 14 (5) (2021)
Valentin Oleksik, Tomasz Trzepiecinski, Marcin Szpunar, Łukasz Chodoła, Daniel Ficek, Ireneusz Szczęsny
Single-Point Incremental Forming of Titanium and Titanium Alloy Sheets. Materials (Basel, Switzerland) 14 (21) (2021)
Tomasz Trzepiecinski, Andrzej Kubit, Andrzej Dzierwa, Bogdan Krasowski, Wojciech Jurczak
Surface Finish Analysis in Single Point Incremental Sheet Forming of Rib-Stiffened 2024-T3 and 7075-T6 Alclad Aluminium Alloy Panels. Materials (Basel, Switzerland) 14 (7) (2021)
Marek Kowalik, Piotr Paszta, Tomasz Trzepiecinski, Leon Kukiełka
Non-Symmetrical Direct Extrusion-Analytical Modelling, Numerical Simulation and Experiment. Materials (Basel, Switzerland) 14 (24) (2021)
Tomasz Trzepiecinski, Andrzej Kubit, Romuald Fejkiel, Łukasz Chodoła, Daniel Ficek, Ireneusz Szczęsny
Modelling of Friction Phenomena Existed in Drawbead in Sheet Metal Forming. Materials (Basel, Switzerland) 14 (19) (2021)
Andrzej Kubit, Łukasz Lenart, Tomasz Trzepiecinski, Andrzej Krzysiak, Wojciech Łabuński
Effect of Sandblasting on Static and Fatigue Strength of Flash Butt Welded 75Cr4 Bandsaw Blades. Materials (Basel, Switzerland) 14 (22) (2021)
Tomasz Trzepiecinski
Tribological Performance of Environmentally Friendly Bio-Degradable Lubricants Based on a Combination of Boric Acid and Bio-Based Oils. Materials (Basel, Switzerland) 13 (17) (2020)
Tomasz Trzepiecinski, Hirpa Gelgele Lemu
Improving Prediction of Springback in Sheet Metal Forming Using Multilayer Perceptron-Based Genetic Algorithm. Materials (Basel, Switzerland) 13 (14) (2020)
Andrzej Kubit, Tomasz Trzepiecinski, Bogdan Krasowski, Ján Slota, Emil Spišák
Strength Analysis of a Rib-Stiffened GLARE-Based Thin-Walled Structure. Materials (Basel, Switzerland) 13 (13) (2020)
Tomasz Trzepiecinski, Hirpa Gelgele Lemu
A Three-Dimensional Elastic-Plastic Contact Analysis of Vickers Indenter on a Deep Drawing Quality Steel Sheet. Materials (Basel, Switzerland) 12 (13) (2019)
Krzysztof Szwajka, Joanna Zielińska-Szwajka, Tomasz Trzepiecinski
Experimental Study on Drilling MDF with Tools Coated with TiAlN and ZrN. Materials (Basel, Switzerland) 12 (3) (2019)
Andrzej Kubit, Tomasz Trzepiecinski, Łukasz Święch, Koen Faes, Ján Slota
Experimental and Numerical Investigations of Thin-Walled Stringer-Stiffened Panels Welded with RFSSW Technology under Uniaxial Compression. Materials (Basel, Switzerland) 12 (11) (2019)