Quim Tarrès (Quim Tarres, Quim Tarrés)

ResearcherID Scopus Author ID ORCID

Publication Activity (10 Years)

Years Active: 2017-2023
Publications (10 Years): 66

Top Topics

Top Venues

Nanomaterials (Basel, Switzerland)

Materials (Basel, Switzerland)

Biomacromolecules

This page only lists publications with an associated author ORCID identifier.

Publications

María E Vallejos, Roberto J Aguado, Ramón Morcillo-Martín, José Alberto Méndez, Fabiola Vilaseca, Quim Tarrès, Pere Mutjé
Behavior of the Flexural Strength of Hemp/Polypropylene Composites: Evaluation of the Intrinsic Flexural Strength of Untreated Hemp Strands. Polymers 15 (2) (2023)
Genís Bayés, Roberto J Aguado, Quim Tarrès, Jaume Planella, Marc Delgado-Aguilar
Stabilization of Beeswax-In-Water Dispersions Using Anionic Cellulose Nanofibers and Their Application in Paper Coating. Nanomaterials (Basel, Switzerland) 13 (16) (2023)
Ana Balea, Maria Concepcion Monte, Elena de la Fuente, Jose Luis Sanchez-Salvador, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar, Carlos Negro
Fit-for-Use Nanofibrillated Cellulose from Recovered Paper. Nanomaterials (Basel, Switzerland) 13 (18) (2023)
Francesc Xavier Espinach, Quim Tarrès
Polymer Composite Analysis and Characterization. Polymers 15 (8) (2023)
Faust Seculi, Francesc Xavier Espinach, Fernando Julián, Marc Delgado-Aguilar, Pere Mutjé, Quim Tarrès
Comparative Evaluation of the Stiffness of Abaca-Fiber-Reinforced Bio-Polyethylene and High Density Polyethylene Composites. Polymers 15 (5) (2023)
Gabriela Adriana Bastida, Quim Tarrès, Roberto J Aguado, Marc Delgado-Aguilar, Miguel Ángel Zanuttini, María Verónica Galván
Flocculation of Cellulose Microfiber and Nanofiber Induced by Chitosan-Xylan Complexes. Nanomaterials (Basel, Switzerland) 13 (17) (2023)
Faust Seculi, Fernando Julián, Joan Llorens, Francesc Xavier Espinach, Pere Mutjé, Quim Tarrès
Methodologies to Evaluate the Micromechanics Flexural Strength Properties of Natural-Fiber-Reinforced Composites: The Case of Abaca-Fiber-Reinforced Bio Polyethylene Composites. Polymers 15 (14) (2023)
Amira Najahi, Quim Tarrès, Marc Delgado-Aguilar, Jean-Luc Putaux, Sami Boufi
High-Lignin-Containing Cellulose Nanofibrils from Date Palm Waste Produced by Hydrothermal Treatment in the Presence of Maleic Acid. Biomacromolecules (2023)
María E Vallejos, Roberto J Aguado, Ramón Morcillo-Martín, José Alberto Méndez, Fabiola Vilaseca, Quim Tarrès, Pere Mutjé
Behavior of the Flexural Strength of Hemp/Polypropylene Composites: Evaluation of the Intrinsic Flexural Strength of Untreated Hemp Strands. Polymers 15 (2) (2023)
Francesc Xavier Espinach, Quim Tarrès
Polymer Composite Analysis and Characterization. Polymers 15 (8) (2023)
Faust Seculi, Francesc Xavier Espinach, Fernando Julián, Marc Delgado-Aguilar, Pere Mutjé, Quim Tarrès
Evaluation of the Interface Strength in the Abaca-Fiber-Reinforced Bio-Polyethylene Composites. Polymers 15 (12) (2023)
Francesc Xavier Espinach, Quim Tarrès
Polymer Composite Analysis and Characterization. Polymers 15 (8) (2023)
Faust Seculi, Francesc Xavier Espinach, Fernando Julián, Marc Delgado-Aguilar, Pere Mutjé, Quim Tarrès
Evaluation of the Interface Strength in the Abaca-Fiber-Reinforced Bio-Polyethylene Composites. Polymers 15 (12) (2023)
María E Vallejos, Roberto J Aguado, Ramón Morcillo-Martín, José Alberto Méndez, Fabiola Vilaseca, Quim Tarrès, Pere Mutjé
Behavior of the Flexural Strength of Hemp/Polypropylene Composites: Evaluation of the Intrinsic Flexural Strength of Untreated Hemp Strands. Polymers 15 (2) (2023)
María E Vallejos, Roberto J Aguado, Ramón Morcillo-Martín, José Alberto Méndez, Fabiola Vilaseca, Quim Tarrès, Pere Mutjé
Behavior of the Flexural Strength of Hemp/Polypropylene Composites: Evaluation of the Intrinsic Flexural Strength of Untreated Hemp Strands. Polymers 15 (2) (2023)
Roberto J Aguado, Gabriela Adriana Bastida, Francesc Xavier Espinach, Joan Llorens, Quim Tarrès, Marc Delgado-Aguilar, Pere Mutjé
Comparative Study on the Stiffness of Poly(lactic acid) Reinforced with Untreated and Bleached Hemp Fibers. Polymers 15 (13) (2023)
Francisco J Alonso-Montemayor, Francesc Xavier Espinach, Quim Tarrès, Manuel Alcalà, Marc Delgado-Aguilar, Pere Mutjé
The Evolution of the Intrinsic Flexural Strength of Jute Strands after a Progressive Delignification Process and Their Contribution to the Flexural Strength of PLA-Based Biocomposites. Polymers 16 (1) (2023)
Francisco J Alonso-Montemayor, Francesc Xavier Espinach, Quim Tarrès, Manuel Alcalà, Marc Delgado-Aguilar, Pere Mutjé
The Evolution of the Intrinsic Flexural Strength of Jute Strands after a Progressive Delignification Process and Their Contribution to the Flexural Strength of PLA-Based Biocomposites. Polymers 16 (1) (2023)
Faust Seculi, Francesc Xavier Espinach, Fernando Julián, Marc Delgado-Aguilar, Pere Mutjé, Quim Tarrès
Comparative Evaluation of the Stiffness of Abaca-Fiber-Reinforced Bio-Polyethylene and High Density Polyethylene Composites. Polymers 15 (5) (2023)
Roberto J Aguado, Francesc Xavier Espinach, Fernando Julián, Quim Tarrès, Marc Delgado-Aguilar, Pere Mutjé
Tensile Strength of Poly(lactic acid)/Bleached Short Hemp Fiber Fully Green Composites as Replacement for Polypropylene/Glass Fiber. Polymers 15 (1) (2022)
Samar Bouzidi, Emna Ben Ayed, Quim Tarrès, Marc Delgado-Aguilar, Sami Boufi
Processing Polymer Blends of Mater-Bi ® and Poly-L-(Lactic Acid) for Blown Film Application with Enhanced Mechanical Strength. Polymers 15 (1) (2022)
Quim Tarrès, Roberto J Aguado, Justin O Zoppe, Pere Mutjé, Núria Fiol, Marc Delgado-Aguilar
Dynamic Light Scattering Plus Scanning Electron Microscopy: Usefulness and Limitations of a Simplified Estimation of Nanocellulose Dimensions. Nanomaterials (Basel, Switzerland) 12 (23) (2022)
Faust Seculi, Francesc Xavier Espinach, Fernando Julián, Marc Delgado-Aguilar, Pere Mutjé, Quim Tarrès
Evaluation of the Strength of the Interface for Abaca Fiber Reinforced Hdpe and Biope Composite Materials, and Its Influence over Tensile Properties. Polymers 14 (24) (2022)
Quim Tarrès, Roberto J Aguado, Justin O Zoppe, Pere Mutjé, Núria Fiol, Marc Delgado-Aguilar
Dynamic Light Scattering Plus Scanning Electron Microscopy: Usefulness and Limitations of a Simplified Estimation of Nanocellulose Dimensions. Nanomaterials (Basel, Switzerland) 12 (23) (2022)
Quim Tarrès, Roberto J Aguado, Juan Domínguez-Robles, Eneko Larrañeta, Marc Delgado-Aguilar
Valorization of Kraft Lignin from Black Liquor in the Production of Composite Materials with Poly(caprolactone) and Natural Stone Groundwood Fibers. Polymers 14 (23) (2022)
Faust Seculi, Francesc Xavier Espinach, Fernando Julián, Marc Delgado-Aguilar, Pere Mutjé, Quim Tarrès
Evaluation of the Strength of the Interface for Abaca Fiber Reinforced Hdpe and Biope Composite Materials, and Its Influence over Tensile Properties. Polymers 14 (24) (2022)
Amira Najahi, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar, Jean-Luc Putaux, Sami Boufi
Lignin-Containing Cellulose Nanofibrils from TEMPO-Mediated Oxidation of Date Palm Waste: Preparation, Characterization, and Reinforcing Potential. Nanomaterials (Basel, Switzerland) 13 (1) (2022)
Roberto J Aguado, Quim Tarrès, Maria Àngels Pèlach, Pere Mutjé, Elena de la Fuente, Jose Luis Sanchez-Salvador, Carlos Negro, Marc Delgado-Aguilar
Micro- and Nanofibrillated Cellulose from Annual Plant-Sourced Fibers: Comparison between Enzymatic Hydrolysis and Mechanical Refining. Nanomaterials (Basel, Switzerland) 12 (9) (2022)
Roberto J Aguado, Francesc Xavier Espinach, Fernando Julián, Quim Tarrès, Marc Delgado-Aguilar, Pere Mutjé
Tensile Strength of Poly(lactic acid)/Bleached Short Hemp Fiber Fully Green Composites as Replacement for Polypropylene/Glass Fiber. Polymers 15 (1) (2022)
Quim Tarrès, Roberto J Aguado, Juan Domínguez-Robles, Eneko Larrañeta, Marc Delgado-Aguilar
Valorization of Kraft Lignin from Black Liquor in the Production of Composite Materials with Poly(caprolactone) and Natural Stone Groundwood Fibers. Polymers 14 (23) (2022)
André Mazega, Quim Tarrès, Roberto J Aguado, Maria Àngels Pèlach, Pere Mutjé, Paulo J T Ferreira, Marc Delgado-Aguilar
Improving the Barrier Properties of Paper to Moisture, Air, and Grease with Nanocellulose-Based Coating Suspensions. Nanomaterials (Basel, Switzerland) 12 (20) (2022)
Amira Najahi, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar, Jean-Luc Putaux, Sami Boufi
Lignin-Containing Cellulose Nanofibrils from TEMPO-Mediated Oxidation of Date Palm Waste: Preparation, Characterization, and Reinforcing Potential. Nanomaterials (Basel, Switzerland) 13 (1) (2022)
Roberto J Aguado, Francesc Xavier Espinach, Fernando Julián, Quim Tarrès, Marc Delgado-Aguilar, Pere Mutjé
Tensile Strength of Poly(lactic acid)/Bleached Short Hemp Fiber Fully Green Composites as Replacement for Polypropylene/Glass Fiber. Polymers 15 (1) (2022)
Amira Najahi, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar, Jean-Luc Putaux, Sami Boufi
Lignin-Containing Cellulose Nanofibrils from TEMPO-Mediated Oxidation of Date Palm Waste: Preparation, Characterization, and Reinforcing Potential. Nanomaterials (Basel, Switzerland) 13 (1) (2022)
Quim Tarrès, Roberto J Aguado, Juan Domínguez-Robles, Eneko Larrañeta, Marc Delgado-Aguilar
Valorization of Kraft Lignin from Black Liquor in the Production of Composite Materials with Poly(caprolactone) and Natural Stone Groundwood Fibers. Polymers 14 (23) (2022)
Quim Tarrès, Roberto J Aguado, Justin O Zoppe, Pere Mutjé, Núria Fiol, Marc Delgado-Aguilar
Dynamic Light Scattering Plus Scanning Electron Microscopy: Usefulness and Limitations of a Simplified Estimation of Nanocellulose Dimensions. Nanomaterials (Basel, Switzerland) 12 (23) (2022)
Faust Seculi, Francesc Xavier Espinach, Fernando Julián, Marc Delgado-Aguilar, Pere Mutjé, Quim Tarrès
Evaluation of the Strength of the Interface for Abaca Fiber Reinforced Hdpe and Biope Composite Materials, and Its Influence over Tensile Properties. Polymers 14 (24) (2022)
Samar Bouzidi, Emna Ben Ayed, Quim Tarrès, Marc Delgado-Aguilar, Sami Boufi
Processing Polymer Blends of Mater-Bi ® and Poly-L-(Lactic Acid) for Blown Film Application with Enhanced Mechanical Strength. Polymers 15 (1) (2022)
Samar Bouzidi, Emna Ben Ayed, Quim Tarrès, Marc Delgado-Aguilar, Sami Boufi
Processing Polymer Blends of Mater-Bi ® and Poly-L-(Lactic Acid) for Blown Film Application with Enhanced Mechanical Strength. Polymers 15 (1) (2022)
Chihaoui Belgacem, Ferran Serra-Parareda, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar, Sami Boufi
Valorization of Date Palm Waste for Plastic Reinforcement: Macro and Micromechanics of Flexural Strength. Polymers 13 (11) (2021)
Quim Tarrès, Roberto J Aguado, M Àngels Pèlach, Pere Mutjé, Marc Delgado-Aguilar
Electrospray Deposition of Cellulose Nanofibers on Paper: Overcoming the Limitations of Conventional Coating. Nanomaterials (Basel, Switzerland) 12 (1) (2021)
Chihaoui Belgacem, Ferran Serra-Parareda, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar, Sami Boufi
The Integral Utilization of Date Palm Waste to Produce Plastic Composites. Polymers 13 (14) (2021)
Albert Serra, Ferran Serra-Parareda, Fabiola Vilaseca, Marc Delgado-Aguilar, Francesc Xavier Espinach, Quim Tarrès
Exploring the Potential of Cotton Industry Byproducts in the Plastic Composite Sector: Macro and Micromechanics Study of the Flexural Modulus. Materials (Basel, Switzerland) 14 (17) (2021)
Ferran Serra-Parareda, Jesus Alba, Quim Tarrès, Francesc Xavier Espinach, Pere Mutjé, Marc Delgado-Aguilar
Characterization of CaCO3 Filled Poly(lactic) Acid and Bio Polyethylene Materials for Building Applications. Polymers 13 (19) (2021)
Eylem Kiliç, Helena Oliver-Ortega, Quim Tarrès, Marc Delgado-Aguilar, Pere Fullana-I-Palmer, Rita Puig I Vidal
Valorization Strategy for Leather Waste as Filler for High-Density Polyethylene Composites: Analysis of the Thermal Stability, Insulation Properties and Chromium Leaching. Polymers 13 (19) (2021)
Ferran Serra-Parareda, Fabiola Vilaseca, Roberto J Aguado, Francesc X Espinach, Quim Tarrès, Marc Delgado-Aguilar
Effective Young's Modulus Estimation of Natural Fibers through Micromechanical Models: The Case of Henequen Fibers Reinforced-PP Composites. Polymers 13 (22) (2021)
Jose Luis Sanchez-Salvador, Cristina Campano, Patricio Lopez-Exposito, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar, Maria Concepcion Monte, Ángeles Blanco
Enhanced Morphological Characterization of Cellulose Nano/Microfibers through Image Skeleton Analysis. Nanomaterials (Basel, Switzerland) 11 (8) (2021)
Ferran Serra-Parareda, Fabiola Vilaseca, Francesc Xavier Espinach, Pere Mutjé, Marc Delgado-Aguilar, Quim Tarrès
Stiffening Potential of Lignocellulosic Fibers in Fully Biobased Composites: The Case of Abaca Strands, Spruce TMP Fibers, Recycled Fibers from ONP, and Barley TMP Fibers. Polymers 13 (4) (2021)
Eylem Kiliç, Quim Tarrès, Marc Delgado-Aguilar, Francesc Xavier Espinach, Pere Fullana-I-Palmer, Rita Puig I Vidal
Leather Waste to Enhance Mechanical Performance of High-Density Polyethylene. Polymers 12 (9) (2020)
Ferran Serra-Parareda, Francesc Xavier Espinach, Maria Àngels Pelach, José Alberto Méndez, Fabiola Vilaseca, Quim Tarrès
Effect of NaOH Treatment on the Flexural Modulus of Hemp Core Reinforced Composites and on the Intrinsic Flexural Moduli of the Fibers. Polymers 12 (6) (2020)
Isabel Bascón-Villegas, Eduardo Espinosa, Rafael Sánchez, Quim Tarrès, Fernando Pérez-Rodríguez, Alejandro Rodríguez
Horticultural Plant Residues as New Source for Lignocellulose Nanofibers Isolation: Application on the Recycling Paperboard Process. Molecules (Basel, Switzerland) 25 (14) (2020)
Belgacem Chihaoui, Ferran Serra-Parareda, Quim Tarrès, Francesc Xavier Espinach, Sami Boufi, Marc Delgado-Aguilar
Effect of the Fiber Treatment on the Stiffness of Date Palm Fiber Reinforced PP Composites: Macro and Micromechanical Evaluation of the Young's Modulus. Polymers 12 (8) (2020)
Francisco J Alonso-Montemayor, Quim Tarrès, Helena Oliver-Ortega, Francesc Xavier Espinach, Rosa Idalia Narro-Céspedes, Adali O Castañeda-Facio, Marc Delgado-Aguilar
Enhancing the Mechanical Performance of Bleached Hemp Fibers Reinforced Polyamide 6 Composites: A Competitive Alternative to Commodity Composites. Polymers 12 (5) (2020)
Quim Tarrès, Helena Oliver-Ortega, Manuel Alcalà, Francesc Xavier Espinach, Pere Mutjé, Marc Delgado-Aguilar
Research on the Strengthening Advantages on Using Cellulose Nanofibers as Polyvinyl Alcohol Reinforcement. Polymers 12 (4) (2020)
Francesc Xavier Espinach, Eduardo Espinosa, Rafel Reixach, Alejandro Rodríguez, Pere Mutjé, Quim Tarrès
Study on the Macro and Micromechanics Tensile Strength Properties of Orange Tree Pruning Fiber as Sustainable Reinforcement on Bio-Polyethylene Compared to Oil-Derived Polymers and Its Composites. Polymers 12 (10) (2020)
David Hernández-Díaz, Ricardo Villar-Ribera, Fernando Julián, Quim Tarrès, Francesc Xavier Espinach, Marc Delgado-Aguilar
Topography of the Interfacial Shear Strength and the Mean Intrinsic Tensile Strength of Hemp Fibers as a Reinforcement of Polypropylene. Materials (Basel, Switzerland) 13 (4) (2020)
Chihaoui Belgacem, Quim Tarrès, Francesc Xavier Espinach, Pere Mutjé, Sami Boufi, Marc Delgado-Aguilar
High-Yield Lignocellulosic Fibers from Date Palm Biomass as Reinforcement in Polypropylene Composites: Effect of Fiber Treatment on Composite Properties. Polymers 12 (6) (2020)
Helena Oliver-Ortega, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar, José Alberto Méndez, Francesc Xavier Espinach
Impact Strength and Water Uptake Behavior of Bleached Kraft Softwood-Reinforced PLA Composites as Alternative to PP-Based Materials. Polymers 12 (9) (2020)
Rafel Reixach, Josep Claramunt, M Àngel Chamorro, Joan Llorens, M Mercè Pareta, Quim Tarrès, Pere Mutjé, Marc Delgado-Aguilar
On the Path to a New Generation of Cement-Based Composites through the Use of Lignocellulosic Micro/Nanofibers. Materials (Basel, Switzerland) 12 (10) (2019)
Ferran Serra-Parareda, Quim Tarrès, Marc Delgado-Aguilar, Francesc Xavier Espinach, Pere Mutjé, Fabiola Vilaseca
Biobased Composites from Biobased-Polyethylene and Barley Thermomechanical Fibers: Micromechanics of Composites. Materials (Basel, Switzerland) 12 (24) (2019)
Josefina Patiño-Masó, Ferran Serra-Parareda, Quim Tarrès, Pere Mutjé, Francesc Xavier Espinach, Marc Delgado-Aguilar
TEMPO-Oxidized Cellulose Nanofibers: A Potential Bio-Based Superabsorbent for Diaper Production. Nanomaterials (Basel, Switzerland) 9 (9) (2019)
Albert Serra, Quim Tarrès, Miquel-Àngel Chamorro, Jordi Soler, Pere Mutjé, Francesc Xavier Espinach, Fabiola Vilaseca
Modeling the Stiffness of Coupled and Uncoupled Recycled Cotton Fibers Reinforced Polypropylene Composites. Polymers 11 (10) (2019)
Helena Oliver-Ortega, José Alberto Méndez, Francesc Xavier Espinach, Quim Tarrès, Monica Ardanuy, Pere Mutjé
Impact Strength and Water Uptake Behaviors of Fully Bio-Based PA11-SGW Composites. Polymers 10 (7) (2018)
Marc Delgado-Aguilar, Rafel Reixach, Quim Tarrès, Francesc Xavier Espinach, Pere Mutjé, José Alberto Méndez
Bleached Kraft Eucalyptus Fibers as Reinforcement of Poly(Lactic Acid) for the Development of High-Performance Biocomposites. Polymers 10 (7) (2018)
Helena Oliver-Ortega, José Alberto Méndez, Pere Mutjé, Quim Tarrès, Francesc Xavier Espinach, Monica Ardanuy
Evaluation of Thermal and Thermomechanical Behaviour of Bio-Based Polyamide 11 Based Composites Reinforced with Lignocellulosic Fibres. Polymers 9 (10) (2017)
Albert Serra, Israel González, Helena Oliver-Ortega, Quim Tarrès, Marc Delgado-Aguilar, Pere Mutjé
Reducing the Amount of Catalyst in TEMPO-Oxidized Cellulose Nanofibers: Effect on Properties and Cost. Polymers 9 (11) (2017)